WORKED the FIRST TIME on my 2004 LEXUS ES330 Today, Oct 5, 2023 to ADD one key. I watched you do it about 5 times, and then I did it. Immense GRATITUDE!
This method WORKED for my 2004 GX470!!! Don't bother with other videos! By far this was the SIMPLEST method to program the key remote. The last part with the key inserted is most likely the tedious part. You gotta wait for the dash red light to completely stop blinking... could take up to 40 seconds [seems FOREVER...] keep watching the light... once it stops blinking, take it out.... wait 5 seconds... then insert it, turn on ignition, engine should start! Take it out, try to unlock/ lock the doors via the remote, if it does, SUCCESS! CONGRATULATIONS , you're done buddy! Thanks Ry!
Thanks allot! Got my keys from 1010keys, followed your direction and it worked perfectly on my 05 GX470. I did have to reset the truck to eliminate all old keys with the 6 key insert and 7 door openings before reprogramming.
I lost my 2nd key for our 2004 ES 330. I got a new key from Amazon and had it cut locally. The programming did not work the first time I tried it. However, I tried it again and it worked perfectly. Thank you!
Ok peeps here is how you program the buttons Rx330 key programming How to Program a 2005 Lexus RX330 Keyless Entry Remote Fob Step by Step How to Programming Instructions: 1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked. 2. Perform these steps within 5 seconds. A. Insert the key into the ignition(Do NOT Turn) Pull key out. B. Insert the key into the ignition(Do NOT Turn) Pull key out. 3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition(Do NOT Turn) Pull key out. 4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start) then back to OFF. F. Remove the key from the ignition. 5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point. 6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote. 7. Open drivers door.
It worked perfectly for the first time! Your video helps me program successfully 2 additional keys that bought from Ebay for my 2004 Lexus ES330. Already subscribed and shared your channel . Thank you so so much.
Perfect!!! I recently bought a 2005 RX330 that had only one key. So I bought a blank key from Amazon, had it cut, followed your video and waalaa it worked. Thanks so much.
@Rythecarguy I have a 2005 Lexus ES330 and I am not able to program the new key with my master's. I have a security light instead of a mobilizer light. Could you please suggest what can I do here?
Worked perfectly for a 2004 Lexus RX330! I had tried so many of these tutorials just to fail every time, yours worked just like you said....Thank You!!!!😀
I call bull-sh*t - I have the same 2004, RX 330, and it didn’t work, multiple times… Furthermore, the 04’, Lexus, RX 330 has a red “Security” light, NOT an “Immobilizer” icon…
My son got a used 2007 Lexus GX470 with only 1 key (no buttons) and we assumed it was the 'master' key. I went to Ace Hardware and got a 2nd spare key (no buttons) but the guy had to wipe all learned/programmed keys and then he reprogrammed them both - but he didn't tell me which one he made the "master" key. We just got a 3rd key (WITH buttons) and when I tried the instructions with the original key (which I thought was the 'master' key) it didn't work. When I tried the 2nd spare key, THEN the instructions worked to program the immobilizer in the new 3rd key (with remote). So the moral of the story is.... you must use the 'master' key as your original key. But other than that, your instructions worked perfectly! Thank you!
This worked great to revive my aftermarket key that had lost its security pairing with the car. I didn't need to bring a second key I just did this routine and I was able to turn it in the ignition again
I can’t for the life of it get my (new to us) 2005 ES330 into key programming mode with the 5 key inserts and 6 door openings. Same with an alternate procedure of hitting the gas pedal 5 times and the brake 6 times. I have 2 reportedly original keys for the vehicle (one with remote fob and 1 without). Might both these keys not be “masters”, like the valet key+card ? Is there a way to tell? My Autel 806 Pro unfortunately doesn’t program keys 😢
I have a Lexus RX350 2007, I follow the UA-cam and the Key starts the car but does not open and unlock the door remotely, did you ever get yours to work to open and unlock the doors, if so maybe you could send me info on how to do it, Thanks,
I’m floored how you got it to start your 2009. If in fact you do have a rx350 2009 (didn’t mistype year) you were very lucky as dealer said you must have OBD scanner to complete. Meaning trip to dealer or buy your own.
@Rythecarguy I have a 2005 Lexus ES330 and I am not able to program the new key with my master's. I have a security light instead of a mobilizer light. Could you please suggest what can I do here?
Omg thank you so much. After trying several videos that told me to program my key by pressing gas pedal and brake. they did not work for me at all. This method actually worked for my 2004 lexus es330. thanks thought i would have to pay dealer.
Hello. Thank you so much. My ECU broke and put a new ECU from eBay. Your Video helped me with many more problems. your solution helped me so so much. Otherwise I had to change the coil parts which is behind the air bag etc. Also that unit has a special bolt I would have problems too. Worst scenario was to find IC900 chip and move 2 of them from my old ECU to the new one. I don't forget I am an amature, who just follows UA-camrs like you. Long story short. Thank you very much. ;)
I would like to try this but can't seem to find the link to where to by the key in the description. Am I reading something wrong it the links you provided?
My 2005 Lexus gx470 I followed your instructions but at the point I put the new key into the ignition with the red light on steady it starts to blink 2 times then pause then blink once and keeps repeating this sequence do you have any idea what that might mean? Thanks in advance Andy
Hey Ryan! Any chance you have the link to the replacement key you used? The link in the description is not showing it for me. I have a 2006 GX470 just like you and would like to get an extra key set up! Thanks for your help.
I purchased and had 2 keys cut. I was successful in programming the first key. But the second key I have been sitting for 15 minutes with the light blinking waiting for it to stop. It didn't take this long with first key...by far. What's wrong? How long should I wait?
Look at another video for programming the remote for the door lock/unlock and hopefully the trunk/hatch too. It is a different thing where you get the car into program mode, then hold both the lock/unlock buttons on the new remote.
How long does it take for the key to programme with the light flashing...I've tried this twice and given up after waiting like 5 minutes with it flashing after doing the key lock and doors thing.
was the key you started with a master or valet? did you make the new key a master or valet? How would you make a master key if all you had was a valet?
Would it work if the master you have is the one that came from the original dealer where you have a key (to use for cutting) without any keyfob and the chip is not in the key but on a card with Lexus info, 1800 number and key code? Thanks :)
I have a 2005 es330. Following your instructions, the car doesn't seem to go into programming mode (the indicator light doesn't go solid). any suggestions?
You are the best of the best. I tried the other way (pressing the gas padel) to program a key on my 2004 es330. It did not work at all. I was about to pay 90 bucks in a lexus dealer to program it. I tried your way and it worked from first time. ❤❤❤❤❤❤❤❤❤😅😅😅😅😅😅😅😅😅
Will it work with the original key just being the metal part (part that goes into ignition) the remote part broke off due to an accident 🤦♂️, and a bought remote key fob not yet cut? Thx.
…Allow me to explain a bit. My metal part turns ignition but has no chip so therefore car doesn’t start. My plan is to parallel it with the aftermarket remote blank key in order to start it.
Hi Ry, just came across your video while doing more research in troubleshooting my immobilizer/no start issues on my 99 gs300. Wondering if you have any advice or recommend a qualified mobile locksmith to look at my car? A couple people have said maybe it's the antenna in the key ring area or communication with ecu? The issue is the immobilizer light will randomly not recognize the key when inserted and i would have to wait 15-45+ minutes with key in for it to possibly "re learn" but it seems to be getting worse after dealing with the problem for a few years now. Thank you
Great tuto. Worked on my 2005 GRJ120, that has NO DVD entertainment. Only one additional key pairing was possible, thus might have reached max keys paired. Kinda scared running thru the whole keys wipe procedure with 6 and 7 cycles ... thanks you.
I was not able to successfully program the fob to work with the remote to lock and unlock my car. It's a 1998 Lexus GS 300. Though the engine does turn over.
Tried this and other ways. Must have Master Key, which is what we lost; only have valet key which runs the car but this process won't do it without old key being a Master. Also have a OBD tool which says same thing, have to have Master key to work from. No Lexus Dealer in our county, going to check with locksmith tomorrow. Do like your video, clean and concise as compared to others.
What's my options for a Rav4 with only 1 valet key only please! I have no idea how previous owners lost master keys.. am I likely to ruin the car if I try they wiping one with the valet key..?
Do you need to have a master key with buttons? I only have one spare key only (no fob). I am going to by an after market lexus key with fob and get it cut. Just want to make sure this will work.
I would imagine that the master would have buttons, but I would think that you would just need a working key with a chip that is already programmed to make this work.
WORKED the FIRST TIME on my 2004 LEXUS ES330 Today, Oct 5, 2023 to ADD one key. I watched you do it about 5 times, and then I did it. Immense GRATITUDE!
It won’t work for me
Got the same car, just ordered a key, will try when new key comes in mail!
It didn't work for me for my 2005 lexus es 330. Any suggestions?
@@benjybronk7718where did you order your key?
This method WORKED for my 2004 GX470!!! Don't bother with other videos! By far this was the SIMPLEST method to program the key remote. The last part with the key inserted is most likely the tedious part. You gotta wait for the dash red light to completely stop blinking... could take up to 40 seconds [seems FOREVER...] keep watching the light... once it stops blinking, take it out.... wait 5 seconds... then insert it, turn on ignition, engine should start! Take it out, try to unlock/ lock the doors via the remote, if it does, SUCCESS! CONGRATULATIONS , you're done buddy! Thanks Ry!
Youre welcome so glad to help!
Man you’re amazing!
I got frustrated trying to program a key on my 2006 Lexus RX330 and your instructions worked like a charm!!
Heck yea! Glad to hear. 🤘🏻💪🏻
Were the steps in this video the same for the RX330?
@@Gettoknome06 yes
@@ammarmuhrez5650 where can I get additional keys with the lock/unlock and power door functions on them?
Thanks allot! Got my keys from 1010keys, followed your direction and it worked perfectly on my 05 GX470. I did have to reset the truck to eliminate all old keys with the 6 key insert and 7 door openings before reprogramming.
I lost my 2nd key for our 2004 ES 330. I got a new key from Amazon and had it cut locally. The programming did not work the first time I tried it. However, I tried it again and it worked perfectly. Thank you!
How much they charge you for the cut?
so my key turns my car on but the buttons don’t lock and un lock my car. how do i get it to program my remote that is on the key itself
Same problem here.v
Ok peeps here is how you program the buttons
Rx330 key programming
How to Program a 2005 Lexus RX330 Keyless Entry Remote Fob
Step by Step How to Programming Instructions:
1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked.
2. Perform these steps within 5 seconds. A. Insert the key into the ignition(Do NOT Turn) Pull key out. B. Insert the key into the ignition(Do NOT Turn) Pull key out.
3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition(Do NOT Turn) Pull key out.
4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start) then back to OFF. F. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote.
7. Open drivers door.
It worked perfectly for the first time! Your video helps me program successfully 2 additional keys that bought from Ebay for my 2004 Lexus ES330. Already subscribed and shared your channel . Thank you so so much.
Perfect!!! I recently bought a 2005 RX330 that had only one key. So I bought a blank key from Amazon, had it cut, followed your video and waalaa it worked. Thanks so much.
Glad it helped! Thanks for watching.
I have a 2005 lexus rx330. I'm not seeing the immobilizer light
Was the original key you were given a standard key or one with buttons?
@@paultersigni7267one with out buttons
@Rythecarguy I have a 2005 Lexus ES330 and I am not able to program the new key with my master's. I have a security light instead of a mobilizer light. Could you please suggest what can I do here?
Worked perfectly for a 2004 Lexus RX330! I had tried so many of these tutorials just to fail every time, yours worked just like you said....Thank You!!!!😀
You're welcome. Thank you for watching! 🤘🏻🤘🏻
I call bull-sh*t - I have the same 2004, RX 330, and it didn’t work, multiple times…
Furthermore, the 04’, Lexus, RX 330 has a red “Security” light, NOT an “Immobilizer” icon…
@@victoryismyne4794I second that not working and having the security light on my 2001 RX300
I’ve been putting this off for 2-3 years until I finally saw your instructions. Omg. What a great tip.
I'm so glad!
My son got a used 2007 Lexus GX470 with only 1 key (no buttons) and we assumed it was the 'master' key. I went to Ace Hardware and got a 2nd spare key (no buttons) but the guy had to wipe all learned/programmed keys and then he reprogrammed them both - but he didn't tell me which one he made the "master" key.
We just got a 3rd key (WITH buttons) and when I tried the instructions with the original key (which I thought was the 'master' key) it didn't work. When I tried the 2nd spare key, THEN the instructions worked to program the immobilizer in the new 3rd key (with remote).
So the moral of the story is.... you must use the 'master' key as your original key. But other than that, your instructions worked perfectly! Thank you!
Right on. Thanks for sharing.
Hi I have a key probably is service key with 3 buttons (grey color) can I program new key with that key?
This worked great to revive my aftermarket key that had lost its security pairing with the car. I didn't need to bring a second key I just did this routine and I was able to turn it in the ignition again
Thanks for the support it worked fine in my 2005 Lexus GX470.
Thanks. This worked for my 2008 Lexus RX350
Yup worked on My 08, now for the remote features.
Worked on my 2004 RX330 - Thanks!
Now need to figure out how to program the lock/unlock buttons.
Worked perfectly for a 2005 Lexus RX330! Your instruction is very specific and clear. You're awesome, thank y😄u!!!!
You're welcome! Glad to help!
This works. Ignore all the pedal instructions you see elsewhere. 2004 RX330.
Thanks Ry!
You got it!! Glad to help.
I was been charge $100 to program my Lexus rx330 key . I just decide to go on UA-cam and found your post ‘ it work perfectly ‘ 100% work
Thanks
So glad to hear! Thanks for watching.
Tried several other videos on my GX470, but none worked. Worked perfectly! Thanks!
🤘🏻
This worked to program the key to the ignition but it doesnt work on the doors and trunk
Do you have any tricks on how to program the smart key on GX460?
Will it work for a 2004 es 330 if the key needs to be reprogrammed. Doesnt have a key fob on it
I can’t for the life of it get my (new to us) 2005 ES330 into key programming mode with the 5 key inserts and 6 door openings. Same with an alternate procedure of hitting the gas pedal 5 times and the brake 6 times. I have 2 reportedly original keys for the vehicle (one with remote fob and 1 without). Might both these keys not be “masters”, like the valet key+card ? Is there a way to tell? My Autel 806 Pro unfortunately doesn’t program keys 😢
You are amazing. This programmed a new key for 2006 rx400h. Now I just need to program the fob buttons.
🤘🏻🤘🏻 thx
WORKED FOR 2008 RX350. THANK YOU
Thanks!
Welcome!
Thank you so much. It worked on my Lexus RX350 2009, it starts the car but the key Fob buttons not programing , any advise?
Did you find the instruction? I think you gotta follow another instruction to program the buttons.
I have a Lexus RX350 2007, I follow the UA-cam and the Key starts the car but does not open and unlock the door remotely, did you ever get yours to work to open and unlock the doors, if so maybe you could send me info on how to do it, Thanks,
I’m floored how you got it to start your 2009. If in fact you do have a rx350 2009 (didn’t mistype year) you were very lucky as dealer said you must have OBD scanner to complete. Meaning trip to dealer or buy your own.
Bro, worked on my 2008 RX350 on the first try! Amazing! Thanks so much!!!
You're welcome! Thanks for watching.
What about a push button Lexus LX570? I would like to program a second key fob remote. Thank you
Thank you bro, after months of trying to figure out how to get my key programmed, I finally found a video that help me get it done 💯💯💪🏾💪🏾
Glad to help!!
Please please I have a key probably is service key (grey color) can I program new key with that key?
I need a video to help program the remote part as well
Worked for my 2008 RX350.
The other instructions did not work but this did. THANKS
Excellent to hear!
@Rythecarguy I have a 2005 Lexus ES330 and I am not able to program the new key with my master's. I have a security light instead of a mobilizer light. Could you please suggest what can I do here?
Omg thank you so much. After trying several videos that told me to program my key by pressing gas pedal and brake. they did not work for me at all. This method actually worked for my 2004 lexus es330. thanks thought i would have to pay dealer.
Glad it worked! Thanks for watching.
But it doesn't work for my 2006 Lexus es330
@@jackpeace4133 i was gonna ask if it works for an 06 es330..did u ever get it to work
This finally worked for my 2005 LX470 when none of the other instructions did. Thank you!
You're welcome! Thanks for watching.
Hello, can you share the link where you bought the replacement key/remote, I need one for my 08 GX470. Thank you!!
Rockstar! This worked GREAT! Nothing else worked except this. Thanks x 1M!
Great to hear!
Could not get this to work on my 2008 GX 470. Tried it many times. Any tips? Thanks!
Brilliant instructions 👍 however the new key fob will not lock or unlocked the doors any ideas?
Will wiping out all the old keys mess up the one working key I have that starts the car?
Hello. Thank you so much. My ECU broke and put a new ECU from eBay.
Your Video helped me with many more problems. your solution helped me so so much.
Otherwise I had to change the coil parts which is behind the air bag etc.
Also that unit has a special bolt I would have problems too.
Worst scenario was to find IC900 chip and move 2 of them from my old ECU to the new one.
I don't forget I am an amature, who just follows UA-camrs like you.
Long story short. Thank you very much. ;)
Hi is this method work on 2000 lexus rx300 trying no luck.
Can that work on the LX470. 2003 ??
I would like to try this but can't seem to find the link to where to by the key in the description. Am I reading something wrong it the links you provided?
My 2005 Lexus gx470 I followed your instructions but at the point I put the new key into the ignition with the red light on steady it starts to blink 2 times then pause then blink once and keeps repeating this sequence do you have any idea what that might mean?
Thanks in advance Andy
Hey Ryan! Any chance you have the link to the replacement key you used? The link in the description is not showing it for me. I have a 2006 GX470 just like you and would like to get an extra key set up! Thanks for your help.
Will this also work when both jey fobs stopped working at the same time?
I have a 2004 Lexus gx470 but doesn’t work
I have the original key the battery was dead for years. I got a new battery but now the key doesn't work. Is the formula the same?
Omy gosh this was so helpful!! Can you also show how you programmed the key remote locking function?
Im so glad it helped! Unfortunately I have since gotten rid of this vechicle so I can no longer demonstrate on it. Sorry!
Does this procedure program the lock and unlock buttons on the key fob as well.
I purchased and had 2 keys cut. I was successful in programming the first key. But the second key I have been sitting for 15 minutes with the light blinking waiting for it to stop. It didn't take this long with first key...by far. What's wrong? How long should I wait?
Hey does this work to program the lock/unlock buttons too? And do you happen to know if those upgraded switchblade style key fobs actually work?
Look at another video for programming the remote for the door lock/unlock and hopefully the trunk/hatch too. It is a different thing where you get the car into program mode, then hold both the lock/unlock buttons on the new remote.
I don’t see the key in the link that brought me to Amazon. Please help.
Will it work on RX350?
does this work with a gray key
WORKS! Lexus GS430 2002. Thank you very much!
You're welcome! Thanks for watching! 👍🏻
It worked on my 2007 GX470....Thank you so much!!!!!!
You're welcome! Thanks for watching.
Did you have to cancel out any old keys?
How long does it take for the key to programme with the light flashing...I've tried this twice and given up after waiting like 5 minutes with it flashing after doing the key lock and doors thing.
Worked on 08 GX470 🤙🏼
Hellll yea
Where can I get a new key and keyfob from?
was the key you started with a master or valet? did you make the new key a master or valet? How would you make a master key if all you had was a valet?
Need the dealership for that. You can do this procedure only if you have the master.
Worked for my 2007 RX 350. Thanks!
Glad to hear!
Would it work if the master you have is the one that came from the original dealer where you have a key (to use for cutting) without any keyfob and the chip is not in the key but on a card with Lexus info, 1800 number and key code? Thanks :)
I have a 2005 es330. Following your instructions, the car doesn't seem to go into programming mode (the indicator light doesn't go solid). any suggestions?
You are the best of the best. I tried the other way (pressing the gas padel) to program a key on my 2004 es330. It did not work at all. I was about to pay 90 bucks in a lexus dealer to program it. I tried your way and it worked from first time. ❤❤❤❤❤❤❤❤❤😅😅😅😅😅😅😅😅😅
Hey that's great! So glad to hear it worked for you. 👍🏻
Will it work with the original key just being the metal part (part that goes into ignition) the remote part broke off due to an accident 🤦♂️, and a bought remote key fob not yet cut? Thx.
…Allow me to explain a bit. My metal part turns ignition but has no chip so therefore car doesn’t start. My plan is to parallel it with the aftermarket remote blank key in order to start it.
…assuming I can program the remote.
Has anyone got this to work on a 2003 gx470?
Niceee , this works perfect on my 2008 Lexus rx350 , thank you so much !
YW! Thanks for watching. 💪🏻
@@Rythecarguy do you know how to program the key fob as well ?
@@akido40 sorry I never did that before selling it
Dont see the new key when I klick the link
I have a lexus es 330 2004 and it is not working for me. I tried the pedal method too. I even did the extra insert thing. What should I try next?
I'm going to. Buy a key but can I buy it on Amazon pls answer
i am down to a last key, after market one. have you heard of a case where it screws up a old key from working after the process?
Unfortunately I don't know. I'm sorry.
Thanks it work on 2004 es330
You're welcome, thanks for watching!
2004 LEXUS RX330
WILL THIS ALSO PROGRAM THE LOCK/UNLOCK BUTTONS
No sir, different process
How do I get this to work for my 2006 Lexus gs 300 with out the original key just a new replacement key fob that still needs to be cut
Unfortunately I have no idea. Without a master key my understanding is you have to bring it to a dealership
Hi Ry, just came across your video while doing more research in troubleshooting my immobilizer/no start issues on my 99 gs300. Wondering if you have any advice or recommend a qualified mobile locksmith to look at my car? A couple people have said maybe it's the antenna in the key ring area or communication with ecu? The issue is the immobilizer light will randomly not recognize the key when inserted and i would have to wait 15-45+ minutes with key in for it to possibly "re learn" but it seems to be getting worse after dealing with the problem for a few years now. Thank you
Great tuto. Worked on my 2005 GRJ120, that has NO DVD entertainment. Only one additional key pairing was possible, thus might have reached max keys paired. Kinda scared running thru the whole keys wipe procedure with 6 and 7 cycles ... thanks you.
You're welcome, thanks for watching!
Thank you
You're welcome
I was not able to successfully program the fob to work with the remote to lock and unlock my car. It's a 1998 Lexus GS 300. Though the engine does turn over.
It works on 2003 gx470 but remote lock buttons still not working.
That sounds right. Programming the remote is a different process. This is just for keys.
2006 LX470 it worked
Does anyone know if this works on a 2020 Lexus RX 350?
Can it work on a. Lexus rx350 old???????
I tryed my 2 amazon keys and no luck on my 2005 rx330
Tried this and other ways. Must have Master Key, which is what we lost; only have valet key which runs the car but this process won't do it without old key being a Master. Also have a OBD tool which says same thing, have to have Master key to work from. No Lexus Dealer in our county, going to check with locksmith tomorrow. Do like your video, clean and concise as compared to others.
05 Lexus ES330.
I have master and valet key. My question is : Can I turn the valet key into master? The valet doesn't turn on the car.
Great vid as usual!
Thanks!!
It not work for my 2007 RX400h, I tried many times, the security light still flashing
What's my options for a Rav4 with only 1 valet key only please! I have no idea how previous owners lost master keys..
am I likely to ruin the car if I try they wiping one with the valet key..?
Yes, do not do it. You need a "Master Key" to reprogram using this method. You will need to bring it to a dealer.
What do I do, I lost the key and chip. I have another key for the car but I need another chip
Gotta go to Lexus
DUUUUUUUUUUUUUUUDE it worked. I was trying it with my valet key when it wasn't working lol
You valet key turn on the car after programming?
@@Official-zf2up Ya but you cant program using the valet key because it doesn't have the chip in it. I think that's the whole point of the valet key.
Do you need to have a master key with buttons? I only have one spare key only (no fob). I am going to by an after market lexus key with fob and get it cut. Just want to make sure this will work.
I would imagine that the master would have buttons, but I would think that you would just need a working key with a chip that is already programmed to make this work.
A bit late, but understand that a Lexus valet key is cut to unlock the car and start it, but NOT able to UNLOCK Glovebox nor the Trunk.
Hey thank you work perfectly and 05 Lexus GX470.
You're welcome. Glad it helped!
My son bought a 2008 lexus gx470. The only key was a valet key. My son went to the deal and bought a key and had it cut.
Am in jamaica i have a 98 gs300 but cant find the key how can i start it help me plz
You need to get it towed to a dealership, prove that you own it, and they can re-key it for you.
Cool video bro! where Can I get a new key?
Hi!
Will it work to lexus rx 400h 2006?
how do you program the remote control lock/unlock?
I’m sorry but I do not know. I don’t have that car anymore.
Great Video!
Thanks! 👍🏻💪🏻
Do you need the OBD2 programmer?
Nope