How to install Safety 1st Easy Close baby gate
Вставка
- Опубліковано 4 жов 2024
- How to install the Safety 1st Easy Close baby gates?
All product details here: int.safety1st.c...
This video shows you how to install easily the gates with or without extensions. The Easy Close gates combine simplicity and quality in a U-shaped pressure-fit gate. - Навчання та стиль
The printed instructions were terrible. This video just made it possible for me to install it. Thanks
As an engineer, I couldn't understand your diagrams, therefore needed to look at this video. However, the top screw adjacent to the lock doesn't have anything to secure it in place. Managed to get it to fit, however, the design needs improvement.
Anyone without access to the internet would have NO CHANCE in fitting this onto a door frame.
Agreed
IT TOOK ME 5 MINUTES TO UNDERSTAND HOW TO FIX GATE AND IS EASY TO FIX AND TO CHANGE FROM UPSTAIRS TO DOWNSTAIRS.
I AM NOT EASY TO PLEASE BUT BEING 74 YEARS OF AGE IT WAS NO PROBLEM AND WOULD RECOMMEND THIS GATE.
thank you pat!
How’s it going lads , been working at thsi for an hour , baby could knock this down in a heartbeat eh
The wall pads have holes for screws, indicating that this is how they should be attached to the wall, rather than just by the friction of the screws in the frame being extended to tighten the gate in the place of installation. I would feel better if the pads were screwed to the wall when the gate is located above stairs, increasing the safety aspect of the gate.
This makes it all look easy!
I would recommend this to anyone
I wonder how the "slam-shut" function operates? Can anyone explain to me?
Music annoying. Ok anyway my gate has different top fittings (maybe an improvement. Thought it was straight got it on but those disc thing are only partially on the wall and partially exposed but seems solid enough. That one was for the kitchen. One upstairs is a different story. Small landing. There’s a door frame on top of the stairs and it has a curve. So have to fit one step down. But to do that need extension fml. Back to the shop tmw. Will update soon. Btw got these at Tesco £13 each on sale.
The Nuts have gone missing on my gate. Can anyone tell me what size the nuts should be so I can go and buy 4.
Mine doesn't even close by itself and the buttons keep getting stuck so have to unscrew where the buttons are and checking that the springs are in the right place.
lucy2791 nhh6
I was wondering if I had to do this...
very good instructions. learn something new today
i cant get the small pull out extention in the top right hand side to stay in place when pulled out to the length i need?
Mine has second button, the lower, stuck. No way to push, is jammed.
Do I have to unscrew it, and take it to the locksmith or need a new piece?
Sorry, this is not as easy to put up as this is...the video barely explains anything or how to rectify things when there is a cross not a tick!
I agree. Completely useless. Do not buy this.
Guardando il video, il montaggio, è molto facile. Ma perché le istruzioni, allora, sono così complesse? E con tutti i pezzi in più cosa dovrei farci? Dentro allo scatolo ho trovato un sacco di viti.
my gate is broken. the gate is lower than the closing A not like in the movie where it is higher ... why ?
Are both sides sticky
excuse me does the extension come with the gate
No, you have to order it separately, depending on the size you need.
The gap won't close 😠
Why is the bottom button jammed
Did you get that fixed? I’m having the same issue!
Mine are pressure gates, but also came with screws and in the manual, says to use a drill. But in this video, the first gate, it didn't use screws. ??
What if I took the counties and now it dosent want to close ?
Zip tie ^*
I cant bloody open it!
the nuts are too tight around the screws impossible i don,t have a vice grip are these made for ordinary folks to put up safety last a joke
qwer8907 bb
Same , I have these extra bits not in this video which don't even screw on . You would need a machine grip to have any hope . Heap of shit
poorly done video. failed to show need to add piece to hold screws after adding one extension. Why no audio to help explain? out of all the videos this is the best one, but.......
Written instructions are shit!
No help at all not easy a joke
the ones who says video not explaining should go to doctor for mental checkup