The video says do not connect this as you would a non-canbus setup. But, I have a canbus for my 2015 Mazda Miata w/Bose. I put one of these 9" touch screen units from Aliexpress. Even though I have the canbus, mine did not work until I hooked it up like the video shows for a non-canbus. All I can tell you is that this video saved me from looking for a car stereo shop that would even look at one of these (many won't work on them) Saved me! I'm a little confused as to why there is not a dedicated back/reverse wire/: But, worked perfect after watching this video. Big thumbs up!!
Great! Without previous experience, I've installed the rear camera thanks to your video (the unit I bought, on Aliexpress, came with a wire already "ready" to be jointed to the red wire, marked "back", no need to cut and split the "pink" wire)> A big THANK YOU! 😁
You….. you are the real Fkn hero today!! Purchased an android 13 touch screen for my Ram…. Hooked up the power to rail lights as I’ve done with all my cars….For months no one could tell me why it wasn’t working… then I found this video .. perfection
Oh my god, I've spent 7 hours today trying to get this working and I finally found your video and it worked! Thanks you very much! Why can't the Chinese just give this information in the instructions instead of random words and useless images!!
This is about the 20th video I've watched trying to figure out fitting an Eonon canbus/head unit/reverse camera to my Golf, and it's the first one that has made absolute sense. A couple of small differences in how the wires are laid out on my system but now that I understand what's actually going on I can figure it out. Thank you :)
FINALLY!!! A wiring video that made sense. I have spent days looking at video after video and they never explained to the layperson what and why they were doing. Mysterious harnesses and wires appearing out of thin air already put together off screen. This actually was easy to follow and no extraneous octopus wires falling from the sky. I also appreciate your recommendation to wire and test BEFORE mountjng the camera. THANK YOU! THANK YOU! THANK YOU!
Thank you!! Very useful video, i have strugled a lot before finding this video. I was connecting the + and - to the backlight like many others said but the camera wasn't working. Thank you again!!
Have wired a good few reversing cameras in past, mainly on excavators and trucks and this one I bought for my VW caddy threw me off. Spent ages neatly wiring it into tailight loom and was puzzled when it didn’t work. Would have been handy if stero manufacturer labelled cables. I was sure the little blue wires were the signal ones. Will have to go back out to workshop now and get it sorted, cheers for the good video, don’t know what I would have done without it
This video right here! This is the one that I have been looking for. Followed the steps on my BMW 335i and it worked perfectly with my Eonon head unit and backup camera. Thanks for the info. The trigger wire from the canbus is the key.
This worked great. Very puzzled when I finished the wiring but I still had this weird split/B&W image on screen. Checked my Eonon (android) settings and you can toggle the camera from PAL to something else to NTSC (which is what we need here in the US).
Thanks to you @AudioVisionUSA I just got it installed tonight on my VW MK6 after watching tons of YT videos, yours nailed it simplified! Saved me $AU 150 in labor fee bigtime!
This fixed my issue of the camera not coming on in my Corolla with an android screen. It was a brown wire not labeled so yeah I would have never figured this out. Great video!
Hey man, thanks for the info. I was stuck on which wire to use for the reverse trigger. And I used the brown wire as there was no pink one in my loom. This was a small project I was doing with my son, and we had fun... a lot actually, especially with your hand gestures...😀 So thanks again. All the best.
Thank you for this awesome video. Probably the most informative & slowing how to properly splice. One question...at the end of the video you said not to forget to connect the ground. Might be a silly question but where do I connect the negative ground to? Thanks!
I got a 2013 Silverado so my wire was brown not pink. But it was in the exact location that was pointed out. A demonstration on how to hook up to ground in the back of the truck would be awesome!!
Thank you thank you thank you!!!!! Why don’t they include this info with these radios?? It’s so simple but you have to know to splice the pink wire and not wire to taillight power like so many non canbus Android systems. 👊🏼🙌🏼
Thanks so much, I have been fighting with this unit for a week, watched your video, did what it said, and it worked, thank you again for that. Now I have to figure out how to get the lines to come on, and the sound. any suggestions?
I did mine with a canbus and I connected it to the reverse light worked only when car wasn’t on only ignition position 1 but when I turned engine on and put in reverse didn’t work so that’s were I made my mistake thanks for the video I’ll re do it again tomorrow
Thanks a lot for the clear instructions. I will test that tomorrow, but I'm sure it will work. This gave me the confidence to do it. Real valuable content. The iso cable comes with a clear "Rear" flag on it. On the canbus plug there's nothing AND it's already plugged elsewhere. I knew it was the third cable next to the red power wire, but it's hard to start cutting wires on a brand new unit when you're not an electrician. one is always afraid to ruin the circuits and the warranty. But I think the ground comes already from the yellow video cable. I guess the little black wire can be let free
I recommend hooking up the ground, less your head unit becomes the ground in a short. Its like hooking up the 3rd green wire ground on a ceiling fan. That would be my assumption why the wire is there.
Rca spliced to oem harness, I just installed the Atoto S8 Premium. I get rear cam output on screen. Hence, I don't get signal from rear cam when in reverse. As could it be because I didn't wire up brake wire or ground it? Please help out if you can here...
F-250 install....Thank you so much. Just like you said, regardless of wire color (mine was Brown even though the manual diagram showed Pink) the Third from the Ground splice between the CAN box is the Ticket!!!! I have been back and forth with the customer service rep and technician sending generic videos and fuzzy pictures from the slow boat from china Alibaba company (Reako Sounds plug and play K2001N Android 12) that I bought mine from. So for $50 bucks, I really can't complain!
Does the pink (3rd wire) receive the 12v when the vehicle is switched into reverse via the canbus. I'm using original camera and not connecting the additional camera and not spicing pink. The unit should receive power and switch screen even if the camera is blank. What controls power to this pink wire - Is it programming in Canbus or the Android device configuration?
If not power to the red wire (the one who connect to the Third like on the video) when reverse then take the positive from the back up light.this is that works for me
Can someone please tell me about 7:58 what happens if we connect the red wire to reverse tail light like we would in a non canbus model car ( i assume the power gets taken from both reverse light and stereo) Is that going to damage something?? Or is it just there to save extra effort to not connect them to reverse light power positive??? Thanks
Hi 👋 the power comes from the canbus. If you connect it to the reverse light as well it will send a unnecessary signal when in reverse and it could damage the canbus after a while, which will then cause the radio to not function properly.
@@audiovisionusa @AudioVisionUSA okay thanks so if we so have canbus, its best to wire like in the video first, and then if still not working like this then only connect the red rear to power positive from reverse light. Got it thanks. Will avoid wiring like normal. I was just unsure because I'm buying canbus for an older car like 2005 opel corsa c, so unsure whether that canbus would be sending reverse signal or not (its mainly for steering wheel control i think). Can i just another question if we need to plug rear red to power positive, can we still do that (if wiring like in video isn't working) and then not connect the red power from yellow RCA to front of radio? Thanks again your very helpful
@@divyanshugogna6152 if it automatically switches to reverse without the camera being connected then the canbus triggers the reverse camera. If it doesn’t then you have to wire it like the other video we have. If you have manual transmission you will most likely have to wire it directly to the reverse light
@@audiovisionusa its automatic transmission, and it show what gear is vehicle in on car's dashboard, so i guess canbus should automatically switch it. I will wait for stereo to come and report back thanks again.
I have a 2013 Tahoe with can bus. im trying to install the backup camera and have followed this and still get no picture when put in reverse. Is there something im missing.
Are you running an automatic car? I followed everything but cant get the head unit to pickup the reverse trigger from canbus. I tried installing on a Manual (stickshift) Honda.
I was so happy that I found this video, my car has canbus, tried today this method (not attaching to the “+” of the backing lamp) but still doesn’t work :( What else could be the problem?
I have a 2011 silverado with a factory camera, how would i go about hooking it up, i believe my stereo is similar to the one in this video! Thanks in advance 😊
Thank you for sharing 🙌🏽 Very helpful! In your vid you stated the trigger wire is always the 3rd wire next to the red wire and colors may vary. Will this stay true, even if the wiring harness or head-unit is not the same as the model here? My audio vision unit’s 3rd wire is brown and runs from it into the maroon canbus module. Just wanted to confirm 👍🏽 Thank you in advance!
He probably can't say yes for sure, now that so many models are out now. You could try a test light on the plug to see what it powered when the car is shifted into reverse?
It needs to be grounded to the vehicle. Find a metal spot somewhere close the camera to attach it, preferably underneath out-of-sight. You may have to drill a hole and use a screw if you can't find anywhere.
I did not understand the last wire on the camera. Where should the black wire be connected? Connect to ground? Can someone explain where this cable will connect to?
hello, i installed a new multimedia on my ford fiesta, but i have a problem, the parking sensors don’t display when i go in reverse, they do when something is in front of me, but never if it’s behind me, while if something is in front and the display triggers, i can see both front and back perfectly… any advices?
Which is better, crimping or soldering? Also its shocking the amount of videos ive seen where people are connecting to a reverse light or a washer motor wiring to power the camera instead of using the power from the head unit which has canbus.
I just installed this radio in my Jeep jk 2007 model with factory amp. But I bought a reverse camera that mounts to the rear tire Carrie. I followed these instructions but the rear camera doesn’t have same connection. It has a black one with 4 pins that goes to camera and the front before camera connected to pins has the black and red wires that comes off the main wire. Would I just connect the 4 pins connector and open the end to camera to find red wire and splice into it and ground the black wire.
I hope this works. I already had a camera hooked to My Jeep u connect radio and I just hooked the rca to the new radio and of course just static. When car goes in reverse it switches to camera screen but static signal. And it worked fine with uconnect. I got to take it back out and try this wire thing. 🙏
I bought the same android unit for my land rover disco sport 2015. Sadly but factory camera is not working and I tried your way and is still not working. Tried to change ntsc to pal and every other option but no luck... Is there any solution? I only have no signal message but my parking sensors are working normaly
So my wire says Back on it (brown color) but it is not connected to the canbus. It's only connected to the end that goes into the head unit. 😅 I don't get it
I did all that but my camera is not working, I have T’eyes c3, in instruction says to wire the red wire to pin 3 which is Accessory and yellow wire to pin 5 which is trigger wire. With all that no image. At the back connected like you did on yours. Do you have any suggestions?
It's a non sense. Accessory wire send 12v constantly when ignition is on. The camera will be always powered when u drive. And the cable camera going to the head unit has only the video connector and a little red wire. This red wire should be connected to the trigger and plug the yellow connector with the yellow "camera in" connector of the head unit.
Thank you for the tutorial. The manual the installation of camera says if have a canbus, its not necessary to ground the black cable. So I would like to know if ground or not, can you help me, thnakyou
The video is very helpful, but I have a wireless transmitter and receiver, I can connect the receiver like this, but I have to connect the transmitter to the taillight or I would have to pull a cable through the whole car, which makes no sense.
The video says do not connect this as you would a non-canbus setup. But, I have a canbus for my 2015 Mazda Miata w/Bose. I put one of these 9" touch screen units from Aliexpress. Even though I have the canbus, mine did not work until I hooked it up like the video shows for a non-canbus. All I can tell you is that this video saved me from looking for a car stereo shop that would even look at one of these (many won't work on them) Saved me! I'm a little confused as to why there is not a dedicated back/reverse wire/: But, worked perfect after watching this video. Big thumbs up!!
Thanks for sharing your experience and the tip! It's great to hear it worked out.
Great! Without previous experience, I've installed the rear camera thanks to your video (the unit I bought, on Aliexpress, came with a wire already "ready" to be jointed to the red wire, marked "back", no need to cut and split the "pink" wire)>
A big THANK YOU! 😁
You….. you are the real Fkn hero today!! Purchased an android 13 touch screen for my Ram…. Hooked up the power to rail lights as I’ve done with all my cars….For months no one could tell me why it wasn’t working… then I found this video .. perfection
Oh my god, I've spent 7 hours today trying to get this working and I finally found your video and it worked! Thanks you very much! Why can't the Chinese just give this information in the instructions instead of random words and useless images!!
Holy shit… after searching for months I found this. I don’t know how I didn’t before but this is an absolute godsend
This is about the 20th video I've watched trying to figure out fitting an Eonon canbus/head unit/reverse camera to my Golf, and it's the first one that has made absolute sense. A couple of small differences in how the wires are laid out on my system but now that I understand what's actually going on I can figure it out. Thank you :)
Also had a golf mk6 and was in tail light and did not work at all. Had i did like this it would work. Its get power from stereo so no need tail light.
FINALLY!!! A wiring video that made sense. I have spent days looking at video after video and they never explained to the layperson what and why they were doing. Mysterious harnesses and wires appearing out of thin air already put together off screen. This actually was easy to follow and no extraneous octopus wires falling from the sky. I also appreciate your recommendation to wire and test BEFORE mountjng the camera. THANK YOU! THANK YOU! THANK YOU!
Thank you!! Very useful video, i have strugled a lot before finding this video. I was connecting the + and - to the backlight like many others said but the camera wasn't working. Thank you again!!
Have wired a good few reversing cameras in past, mainly on excavators and trucks and this one I bought for my VW caddy threw me off. Spent ages neatly wiring it into tailight loom and was puzzled when it didn’t work. Would have been handy if stero manufacturer labelled cables. I was sure the little blue wires were the signal ones. Will have to go back out to workshop now and get it sorted, cheers for the good video, don’t know what I would have done without it
This video right here! This is the one that I have been looking for. Followed the steps on my BMW 335i and it worked perfectly with my Eonon head unit and backup camera. Thanks for the info. The trigger wire from the canbus is the key.
Where did you Connect the trigger cable? Pink or Brown?
@@AlbertoTV85 start watching at 2:10 in the video. It shows it.
@@AlbertoTV85 pink
This worked great. Very puzzled when I finished the wiring but I still had this weird split/B&W image on screen. Checked my Eonon (android) settings and you can toggle the camera from PAL to something else to NTSC (which is what we need here in the US).
Thanks to you @AudioVisionUSA I just got it installed tonight on my VW MK6 after watching tons of YT videos, yours nailed it simplified! Saved me $AU 150 in labor fee bigtime!
Best video I’ve seen by far, thank you
Thank you so much. Finally gai my camera working perfectly- it was fed from revere light but this new way is much better. Thanks again
This fixed my issue of the camera not coming on in my Corolla with an android screen. It was a brown wire not labeled so yeah I would have never figured this out. Great video!
Yo! Thank you very much i took around 4hrs trying see what it was and u helped me in 10mins
Thanks, buddy, great help finally. i was able to install the camera. Simple and easy.
Hey man, thanks for the info. I was stuck on which wire to use for the reverse trigger. And I used the brown wire as there was no pink one in my loom.
This was a small project I was doing with my son, and we had fun... a lot actually, especially with your hand gestures...😀
So thanks again.
All the best.
Thank u - a simple video that made my life easier- thank u
Thank you for this awesome video. Probably the most informative & slowing how to properly splice. One question...at the end of the video you said not to forget to connect the ground. Might be a silly question but where do I connect the negative ground to? Thanks!
Thanks a lot, this helped me a lot, the instructions were misleading but after watching this video I managed to have the camera working 🎉🎉
I got a 2013 Silverado so my wire was brown not pink. But it was in the exact location that was pointed out. A demonstration on how to hook up to ground in the back of the truck would be awesome!!
Thank you thank you thank you!!!!! Why don’t they include this info with these radios?? It’s so simple but you have to know to splice the pink wire and not wire to taillight power like so many non canbus Android systems. 👊🏼🙌🏼
Big facts 💯
Thank You for taking the time to do this Video. Your a life saver
So you don’t need to tap in to the reverse positive
? if you have a Canbus on your android radio?
apres le cable rose"back" vien du même endroit que le rose du canbus .
Mine is a different connection much straightforward and simple and it works well
Thanks so much, I have been fighting with this unit for a week, watched your video, did what it said, and it worked, thank you again for that. Now I have to figure out how to get the lines to come on, and the sound. any suggestions?
I did mine with a canbus and I connected it to the reverse light worked only when car wasn’t on only ignition position 1 but when I turned engine on and put in reverse didn’t work so that’s were I made my mistake thanks for the video I’ll re do it again tomorrow
Mine had a brown wire, but I have a question how do you wire in a second camera for the front? I don’t have front camera RCA it says cvbs1
Thanks a lot for the clear instructions. I will test that tomorrow, but I'm sure it will work. This gave me the confidence to do it.
Real valuable content.
The iso cable comes with a clear "Rear" flag on it. On the canbus plug there's nothing AND it's already plugged elsewhere.
I knew it was the third cable next to the red power wire, but it's hard to start cutting wires on a brand new unit when you're not an electrician. one is always afraid to ruin the circuits and the warranty.
But I think the ground comes already from the yellow video cable. I guess the little black wire can be let free
I recommend hooking up the ground, less your head unit becomes the ground in a short. Its like hooking up the 3rd green wire ground on a ceiling fan. That would be my assumption why the wire is there.
You are amazing!!! Not only was this video exactly what I needed to see, but the unit at the end was also identical to mine! Thank you so much!
I'll try it out this evening, ive watched so many videos and never even heard of "can bus" systems. apparently my dodge grand caravan has one!
Did you get this to work on your caravan?
The two small blue wires are aerials for Bluetooth and Wi-Fi connection.
Rca spliced to oem harness, I just installed the Atoto S8 Premium. I get rear cam output on screen. Hence, I don't get signal from rear cam when in reverse. As could it be because I didn't wire up brake wire or ground it? Please help out if you can here...
F-250 install....Thank you so much. Just like you said, regardless of wire color (mine was Brown even though the manual diagram showed Pink) the Third from the Ground splice between the CAN box is the Ticket!!!! I have been back and forth with the customer service rep and technician sending generic videos and fuzzy pictures from the slow boat from china Alibaba company (Reako Sounds plug and play K2001N Android 12) that I bought mine from. So for $50 bucks, I really can't complain!
Where did you connect thé camera to? I have the same problem.
Does the pink (3rd wire) receive the 12v when the vehicle is switched into reverse via the canbus. I'm using original camera and not connecting the additional camera and not spicing pink. The unit should receive power and switch screen even if the camera is blank. What controls power to this pink wire - Is it programming in Canbus or the Android device configuration?
If not power to the red wire (the one who connect to the Third like on the video) when reverse then take the positive from the back up light.this is that works for me
Can someone please tell me about 7:58 what happens if we connect the red wire to reverse tail light like we would in a non canbus model car ( i assume the power gets taken from both reverse light and stereo)
Is that going to damage something??
Or is it just there to save extra effort to not connect them to reverse light power positive???
Thanks
Hi 👋 the power comes from the canbus. If you connect it to the reverse light as well it will send a unnecessary signal when in reverse and it could damage the canbus after a while, which will then cause the radio to not function properly.
@@audiovisionusa @AudioVisionUSA okay thanks so if we so have canbus, its best to wire like in the video first, and then if still not working like this then only connect the red rear to power positive from reverse light. Got it thanks. Will avoid wiring like normal.
I was just unsure because I'm buying canbus for an older car like 2005 opel corsa c, so unsure whether that canbus would be sending reverse signal or not (its mainly for steering wheel control i think).
Can i just another question if we need to plug rear red to power positive, can we still do that (if wiring like in video isn't working) and then not connect the red power from yellow RCA to front of radio?
Thanks again your very helpful
@@divyanshugogna6152 if it automatically switches to reverse without the camera being connected then the canbus triggers the reverse camera. If it doesn’t then you have to wire it like the other video we have. If you have manual transmission you will most likely have to wire it directly to the reverse light
@@audiovisionusa its automatic transmission, and it show what gear is vehicle in on car's dashboard, so i guess canbus should automatically switch it.
I will wait for stereo to come and report back thanks again.
Then? What's your report? Regards
I have a 2013 Tahoe with can bus. im trying to install the backup camera and have followed this and still get no picture when put in reverse. Is there something im missing.
ever get yours to work?
u have done great favor for me , just did it like u said, dada, working.
Just to understand better. at step 6, the pink cable you cut and reconnect (pink one, "radio's trigger wire") is coming from the canbus adapter?
Did it work after cutting wire from canbus?
Made it simple and easy. Absolutely my go to vid when it comes through the post.
Thank you.
Best instructional video👏👏👏
Will this installation work for a front camera install as well.
Just figured mine out on my own,instead of stripping the pink one I connected to one of the two little blue ones at the side of the video cable.
Which unit do you have?
Thanks very much I saw a 100 video until I found you.but mine who's need to connect to the back up light for power 12v
Are you running an automatic car? I followed everything but cant get the head unit to pickup the reverse trigger from canbus. I tried installing on a Manual (stickshift) Honda.
Man really nice video! But I do a question; how do the camera gets power if you don’t take the power from the reverse light?
That’s what I’m thinking on also, but I guess from the head unit
Hi, thanks for the video, is it possible to connect a wireless reversing camera in the same way?
I was so happy that I found this video, my car has canbus, tried today this method (not attaching to the “+” of the backing lamp) but still doesn’t work :(
What else could be the problem?
I have a 2011 silverado with a factory camera, how would i go about hooking it up, i believe my stereo is similar to the one in this video! Thanks in advance 😊
How do i get tht gmc dosplay you have on this vid
What do you mean ground negative? Does the black wire go into the reverse light?
After wiring like thus, how do i view rear camera while driving? Dont i need +12v on the red wire near the camera?
Thank you for sharing 🙌🏽 Very helpful! In your vid you stated the trigger wire is always the 3rd wire next to the red wire and colors may vary. Will this stay true, even if the wiring harness or head-unit is not the same as the model here? My audio vision unit’s 3rd wire is brown and runs from it into the maroon canbus module. Just wanted to confirm 👍🏽 Thank you in advance!
He probably can't say yes for sure, now that so many models are out now. You could try a test light on the plug to see what it powered when the car is shifted into reverse?
@@Jgarage5 Okay, sounds like a plan bro. Thank you 👌🏽
Thanks. When headunit deep sleeps, if i put reverse it says no signal until android fully boots any tips for this?
Finally !!!! Thank you so much 👍🏼👍🏼👍🏼👍🏼
Do I attach those two red wires to reverse light on a 2003 gmc Sierra 2500 diesel ??
Great explanation! Thank you so much ! 👍
This just saved my day!!!!
Can you zoom in and out? Mine seems like it is zoomed all the way in. And can you have the green, yellow and red caution lines?
Very clean! Good job! I have a question: in my android radio have “video in” cablejack. Its ok there? Is the same?
No, it’s not the same. You should have a single connector dedicated to the camera. Thanks for watching.
Is there a way to flip the image? I am unable to physically mount the camera in a different place, can you flip the view in the settings?
Having a car with Can bus system and applying this method will not void the car warranty right?
Where did you coonect to Ground black wire?
It needs to be grounded to the vehicle. Find a metal spot somewhere close the camera to attach it, preferably underneath out-of-sight. You may have to drill a hole and use a screw if you can't find anywhere.
Great video master , thanks a lot.
Legend, you’re a legend 👌🏽
What happens if I connected to my reverse light ? It’s a canbus car and all works well cheers
How can i connect the black wire to the ground? Some help? Thank you
Does this works if your car already have a factory reverse camera? Thanjs in Advance
And the groud (-) cable from the camera where do you connect it?
My Honda already has a backup camera, how does that work? I appreciate any assistance! 🙏🏼
I did not understand the last wire on the camera. Where should the black wire be connected? Connect to ground? Can someone explain where this cable will connect to?
Mines used to detect when I put it in reverse after installing the camera but nothing pops up on the screen, no “signal lost” nor the reverse camera
That brown cable work thanks!
hello, i installed a new multimedia on my ford fiesta, but i have a problem, the parking sensors don’t display when i go in reverse, they do when something is in front of me, but never if it’s behind me, while if something is in front and the display triggers, i can see both front and back perfectly… any advices?
Which is better, crimping or soldering?
Also its shocking the amount of videos ive seen where people are connecting to a reverse light or a washer motor wiring to power the camera instead of using the power from the head unit which has canbus.
soldering is always better. do the pull test and you'll see . but not everyone has solder..
What if my car already has a factory backup camera, what process changes here?
Did you manage to get it working? I will.remove the oem today finally, and see if i can replace for a better one!
I just installed this radio in my Jeep jk 2007 model with factory amp. But I bought a reverse camera that mounts to the rear tire Carrie. I followed these instructions but the rear camera doesn’t have same connection. It has a black one with 4 pins that goes to camera and the front before camera connected to pins has the black and red wires that comes off the main wire. Would I just connect the 4 pins connector and open the end to camera to find red wire and splice into it and ground the black wire.
Does the first part of this, splicing to pink wire, apply for a factory camera?
No
Hi, thanks for the video....but how does camera know when to work when it is not connected to reverse wire?
The signal is sent by can bus system.
I hope this works. I already had a camera hooked to My Jeep u connect radio and I just hooked the rca to the new radio and of course just static. When car goes in reverse it switches to camera screen but static signal. And it worked fine with uconnect. I got to take it back out and try this wire thing. 🙏
It sounds like you need to change the camera settings
Anyone know where does the other end of the trigger wire goes to? If the canbus which slot? Thanks
where do you install it onto the back of a 2012 dodge ram?
I’m still confused I have the android stereo. My pink wire says “back” on it but it doesn’t connect to the canbus like this video.
This works with a honda civic 2016? , i bought an android stereo with canbus and i want to install it like thiz
Can you splice into the trigger wire behind the radio or do you have to use the butt end connector?
You can splice into it
“That’s baby makin’ music right there… “
-Sir Ron Burgundy
very clear and precise excellent thank you
I bought the same android unit for my land rover disco sport 2015. Sadly but factory camera is not working and I tried your way and is still not working. Tried to change ntsc to pal and every other option but no luck... Is there any solution? I only have no signal message but my parking sensors are working normaly
So my wire says Back on it (brown color) but it is not connected to the canbus. It's only connected to the end that goes into the head unit. 😅 I don't get it
I did all that but my camera is not working, I have T’eyes c3, in instruction says to wire the red wire to pin 3 which is Accessory and yellow wire to pin 5 which is trigger wire. With all that no image. At the back connected like you did on yours. Do you have any suggestions?
It's a non sense. Accessory wire send 12v constantly when ignition is on. The camera will be always powered when u drive. And the cable camera going to the head unit has only the video connector and a little red wire. This red wire should be connected to the trigger and plug the yellow connector with the yellow "camera in" connector of the head unit.
7:55 How to identify if mine is a canbus unit?
Thank you 🙏🙏🙏🙏🙏the best video
How do i connect it if I only have a red cable on the one side of the yellow rca, the other side is a 4 pin connector and red and black wire
A mi me pasa lo mismo. No sé cómo solucionarlo.
Thank you for the tutorial.
The manual the installation of camera says if have a canbus, its not necessary to ground the black cable. So I would like to know if ground or not, can you help me, thnakyou
Did you ever figure that out ?
I already have an onboard reverse cam, how do I connect this to an android head unit?
Where do i plug the ground cable please ?
Is it necessary to connect the black wire to the ground? In my case it's working without it. Anyway, thank you for your video.
For some models it isn’t necessary
If you put power to the camera why dont it come up on the screen, instead of no signal?
The video is very helpful, but I have a wireless transmitter and receiver, I can connect the receiver like this, but I have to connect the transmitter to the taillight or I would have to pull a cable through the whole car, which makes no sense.