2017 NC750X Carbon Akrapovic Sound

Поділитися
Вставка
  • Опубліковано 24 лип 2017
  • Baffle is out
  • Ігри

КОМЕНТАРІ • 26

  • @dantegw
    @dantegw 11 місяців тому +3

    this is the best sound i have heard from an NC 750 on all of youtube.

  • @PNH750
    @PNH750 3 роки тому +3

    I fitted the same system to my Honda NC750. The dealer recommended that I buy it to improve the performance at low revs. After paying with an arm and two legs, I found that the unit was a little lighter, a fraction noisier but not really much better over the stock silencer. On checking the maker's website I learned that my investment had gained me a mind-blowing 1/2hp. I later learned that I neede to 'decat' to get the best from the Akropovic.

    • @youridv
      @youridv 2 роки тому +3

      exhausts improving performance is a myth on japanese bikes. they gain 1-2 hp at best. maybe with a decat and an ecu tune you'll gain a fraction more but nothing you'll ever notice while riding. Exhausts are noise and noise only. If you want more sound out of yours, take the baffle out.
      Also, any reputable and honest tuner will tell you that exhausts and tuning are only for sound and throttle response, nothing else. The NC750X is already tuned for low end torque and no exhaust will significantly improve that

  • @cajunrider7101
    @cajunrider7101 6 років тому +7

    Why do you (people) cover or blur the plate ? Everyone sees it when riding.

  • @pauloakes5718
    @pauloakes5718 2 роки тому +1

    I prefer the standard exhaust,that would piss me off after a couple of hundred miles.Most people have crotch rockets for that including me and my wife.This is a 600 mile per day bike for the purpose of enjoying life and the open road with a bit of tranquility thrown in for good measure. And you can still misbehave🤫.Great account!

  • @tkk944
    @tkk944 2 роки тому +1

    great sound

  • @devilbarata70
    @devilbarata70 4 роки тому

    you notice some increase in power with this new exhaust. thanks for listening

  • @IdealBike
    @IdealBike 4 роки тому +1

    Hi there! We have the same bike and I was thinking to buy the Akrapovic exhaust also...did you noticed some changes on the fuel consumption after the change? Or a slightly power increasing? Thanks!

    • @colsonstephen8104
      @colsonstephen8104 3 роки тому

      Not sure if anyone gives a shit but if you're stoned like me atm you can stream pretty much all the new movies and series on Instaflixxer. I've been watching with my girlfriend for the last couple of weeks =)

    • @blazejason5551
      @blazejason5551 3 роки тому

      @Colson Stephen Yup, been using instaflixxer for months myself :D

  • @RRodrigues
    @RRodrigues 7 років тому +3

    Superb Sound!

  • @maartendezwaan9715
    @maartendezwaan9715 5 років тому

    I just bought the same Akra
    for my NC700, not the cheapest but love the sound..
    Did you change the front pipe too?

  • @IdealBike
    @IdealBike 5 років тому

    Hi there! Any modifications on the fuel consumption?

  • @eight9823
    @eight9823 3 роки тому

    AKRAPOVICsound は本当に良いねぇ(◦ˉ ˘ ˉ◦)ニヤニヤ

  • @jamesnickel4748
    @jamesnickel4748 4 роки тому

    Sounds amazing!

  • @TheDariuserazo
    @TheDariuserazo 4 роки тому

    waooooo..!!! amazing

  • @nortonbsa9961
    @nortonbsa9961 5 років тому +1

    Hi did it need remapping? Thanks

    • @ZiRK24
      @ZiRK24  5 років тому +3

      Hi Norton, no spoke to the garage and there is no need for a remap on this exhaust, cheers.

  • @dusanmihajlovic4478
    @dusanmihajlovic4478 5 років тому

    EXTRA

  • @mahmudalmahmud3957
    @mahmudalmahmud3957 2 роки тому

    مافهمنا من هالمقطع شي أبدا"

  • @BrianPajonk
    @BrianPajonk 6 років тому

    Hey! I'm about to buy the same exhaust. How to remove dbkiller? Do I need to remove any screws? Or just pull it out?

    • @sanderbrust
      @sanderbrust 6 років тому

      just remove the screw and pull it out bro

    • @ZiRK24
      @ZiRK24  5 років тому +3

      @@sanderbrust Very late reply on this but on this exact exhaust there is no screw. It is welded so you need to drill a hole through the weld.

  • @brentbradley6711
    @brentbradley6711 2 роки тому

    Waste of money