How To Build Your CNC Controller Using Service Graphics
Вставка
- Опубліковано 15 жов 2024
- This video covers using my system servicing graphics to assemble your G540 CNC controller painlessly. These will save you research time, and allow for the fastest servicing of your controller possible.
If you have questions, or require quotes please message me direct at Storm2313@gmail.com or through my eBay store here. www.ebay.com/s...
Here's a link to grounding best practices video course. • CNC Grounding Best Pra...
Below is a link to my CNC components that support the issues covered in this video along with other products to support your builds.
Here's a link to my servicing graphics for the G540
www.ebay.com/i...
Here's a link to my CNC 48v 12.5a power supplies with 10 power output terminals, and integrated EMI filter
www.ebay.com/i...
Here's a link to my Ethernet Smooth Stepper turnkey package www.ebay.com/i...
Here's a link to my UC-400 Ethernet Turnkey Controller package www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors
www.ebay.com/i...
CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Panel Connector
www.ebay.com/i...
CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) www.ebay.com/i...
CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter www.ebay.com/i...
CNC Cooling Brushless Fan 30-48v 60mm x 38mm (65CFM)
www.ebay.com/i...
Terminal Splitter Kit For A/C Input 110v/220v (Gives 12 Outputs To Split Power) www.ebay.com/i...
This is my DS Flexion (Ultra Flex) cable.
CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw
www.ebay.com/i...
This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used)
CNC VFD Cable 10ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 15ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 20ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 30ft 16/4 Double Shielded For Spindles www.ebay.com/i...
Here's my 22/2 double shielded accessory cable.
CNC Double Shielded 22awg 2 Lead Cable (20ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (30ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)
www.ebay.com/i...
Here's links to the GX-16 prewired connectors discussed in the video.
CNC GX-16 3 Pin Male Panel Mount Connector Wired Silicone Leads & EMI Filters www.ebay.com/i...
#PlasmaCNCScreenSet #Mach3Tools #CNCMachining #PlasmaCNCUpgrade #CNCSoftware #Mach3Plasma #AdvancedMachining #PlasmaCutting #MetalworkingTech #CNCOptimization #PlasmaCutters #PrecisionMachining #Mach3Enhanced #DigitalFabrication #CNCCommunity #EngineeringSolutions #MachinistLife #AutomatedCutting #IndustrialTechnology
greetings vinc that's it if all manufacturers of cnc equipment should intervene when buying their equipment and the world would be better you are one of the few who understands what he is saying thank you
Thank you for your kind words, and support. I really appreciate it. Vince
I want one
Thank you John for your support as always! Vince
For getting rid of vfd noise what should be done?, Installing powerline filter as input and for output ferrite beads? or alone powerline filter as input is enough for it? Or any other configuration is to be done? Please reply 🙏
Thank you for your support. The proper uses of the correct double shielded cables is the only sure way to mitigate EMI from VFD's, and spindles. Thank you,
Vince
@@corvetteguy50 Double sheilded cable?
Here you go, and the links to it are in the video's description ua-cam.com/video/vutnyQJn-RM/v-deo.html
Thank you,
Vince
@@corvetteguy50 One more thing, how this sheilded wire needs to be connected, i mean for other steppers, limit switches, it just directly needs to be attached to the ground port from the machine ground junction side, for vfd and spindle, is it like the ground of the vfd surface needs a seperate ground wire to this body junction and the sheilded wire for vfd to motor, needs to be attached from this machine junction and other end to the spindle? Also if we are connected this sheilded wire at motor end, since the motor is also grounded at different end, so wouldn't that make a ground loop? since 2 different zero points are established?
This video covers the proper connection of a spindle's power cable to the units VFD. Thank you,
Vince
From how many sides does the Sheilded wire of limit switches, Motors, and vfd to spindle should be connected, both the sides, only at one side with star point configuration or what? Please help 🙏
Thank you for your support. The shield drains on all cables should be connected at only one end of the cable which is to be allocated to the ground buss on the controller, and the ground terminal for the VFD's power, and spindle power cable.
Thank you,
Vince
@@corvetteguy50 Thank you very much for replying, just a simple query, i read many cnc forums out on fb and all, just for vfd they said it should be grounded at both ends (wire from vfd to spindle) is it true?
These internet guru's claim this after 3 decades of grounding only one end of a double shielded cable because all of a sudden VFD cable manufacturers in the US designed a kit they claim is designed exclusively for this.
The super interesting thing is there's no actual claims let alone proof of a VFD being damaged from only grounding one end of the shield drain from the spindle's power cable, or spindle itself.
This is completely verifiable with a simple open Google search on the topic.
The easiest way to "spot the not" is to review the internet for consistency. Its really odd in all the world of CNC users not one has claimed for this to have happened isn't it?
If this was indeed an issue then it wouldn't have just come to light now, but 30 years ago as the EMI produced from the hardware is no different. They can't explain it when asked that question.
I speak as an engineer, and a vendor of double shielded cables with my eBay store as proof with my specialty in robotic automation, and after over 1000 sales a year on my spindle cable DIY packages, and directing my clients to ground only one end of the shield drain at the VFD end as we did since their inception they never have come back with any issues proven once again by me feedback that's verifiable through eBay in which I have no control over.
The truth is there if these online guru's care to pay attention to details, but forums are no place to gather accurate information from verifiable sources as you have no idea who these people are, or where they're getting they're information from.
Thank you,
Vince
@@corvetteguy50 Thank you very much for detailed reply and clarifying me
Yes, sir glad to help.
Thank you,
Vince