HY VFD's Installed Incorrectly...
Вставка
- Опубліковано 7 лип 2024
- This video covers UA-cam content creator/influencers who installed HY (VFD) variable frequency drives on their channels that were installed incorrectly either using incorrect components, missing proper grounding, providing misinformation, or a combination of the above.
Please due your research before following any content creators video as the content they produce are for entertainment, and best practices are seldom followed, or understood.
If you have questions, or require quotes please message me direct at Storm2313@gmail.com or through my eBay store here. www.ebay.com/str/edealersdirect
Below is a link to my CNC components that support the issues covered in this video along with other products to support your builds.
These are my new complete DS Flexion double shielded ultra flex cable motor kits including tool less mounted ground bus bar.
All required connectors are included, and all you require is solder, and flux which I can include as well. Let me know.
3 axis - 30’ - www.ebay.com/itm/135002416451
3 axis - 45’ - www.ebay.com/itm/135002423741
3 axis - 60’ - www.ebay.com/itm/145700363917
3 axis - 75’ - www.ebay.com/itm/145700364721
3 axis - 90’ - www.ebay.com/itm/145700365223
4 axis - 40’ - www.ebay.com/itm/135002731170
4 axis - 60’ - www.ebay.com/itm/135003770288
4 axis - 80’ - www.ebay.com/itm/135003770852
4 axis - 100’ - www.ebay.com/itm/135003771793
4 axis - 120’ - www.ebay.com/itm/145702114702
Pro-Grade CNC Electronics Enclosure Pre-Milled (EMI Shielded) 19W x 24Lx 8.75H www.ebay.com/itm/132210265015
CNC Ground Buss Bar System Complete With SC25-8 Terminals And 2Ft. Ground Strap www.ebay.com/itm/143107363730
CNC Power Supply 48v 12.5a (600w) With Built In EMI Filter
www.ebay.com/itm/143685077396
Zippy VW1 (IP67 Rated) 3 Waterproof CNC Limit/Home Switches
www.ebay.com/itm/133652809249
Zippy VW1 (IP67 Rated) 4 Waterproof CNC Limit/Home Switches
www.ebay.com/itm/133652811447
Here's a link to my Ethernet Smooth Stepper turnkey package www.ebay.com/itm/133064380079
Here's a link to my UC-400 Ethernet Turnkey Controller package www.ebay.com/itm/144862296429
CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
www.ebay.com/itm/133300288430
CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors
www.ebay.com/itm/143498883290
CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
www.ebay.com/itm/144280353346
CNC 18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Panel Connector
www.ebay.com/itm/144279518155
CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) www.ebay.com/itm/143650166809
CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter www.ebay.com/itm/134192466153
CNC Cooling Brushless Fan 30-48v 60mm x 38mm (65CFM)
www.ebay.com/itm/134194961658
Terminal Splitter Kit For A/C Input 110v/220v (Gives 12 Outputs To Split Power) www.ebay.com/itm/132532331429
This is my DS Flexion (Ultra Flex) cable.
CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/itm/133891676093
CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/itm/133891673596
CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw
www.ebay.com/itm/132649829362
This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used)
CNC VFD Cable 10ft 16/4 Double Shielded For Spindles www.ebay.com/itm/142538105021
CNC VFD Cable 15ft 16/4 Double Shielded For Spindles www.ebay.com/itm/133273996534
CNC VFD Cable 20ft 16/4 Double Shielded For Spindles www.ebay.com/itm/131899174942
CNC VFD Cable 30ft 16/4 Double Shielded For Spindles www.ebay.com/itm/133273998565
Here's my 22/2 double shielded accessory cable.
CNC Double Shielded 22awg 2 Lead Cable (20ft.) (Bullet Proof Protection)
www.ebay.com/itm/145089695270
CNC Double Shielded 22awg 2 Lead Cable (30ft.) (Bullet Proof Protection)
www.ebay.com/itm/145089698308
CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)
www.ebay.com/itm/145089706227
Here's links to the GX-16 prewired connectors discussed in the video.
CNC GX-16 3 Pin Male Panel Mount Connector Wired Silicone Leads & EMI Filters www.ebay.com/itm/144276695477
#PlasmaCNCScreenSet #Mach3Tools #CNCMachining #PlasmaCNCUpgrade #CNCSoftware #Mach3Plasma #AdvancedMachining #PlasmaCutting #MetalworkingTech #CNCOptimization #PlasmaCutters #PrecisionMachining #Mach3Enhanced #DigitalFabrication #CNCCommunity #EngineeringSolutions #MachinistLife #AutomatedCutting #IndustrialTechnology - Навчання та стиль
Soldering with flux was taught to me in highschool. Keeping a clean tip, too. How can these characters believe they should be watched, let alone used as a source for electronics assembly without the basics. I think if we leave a common unfavourable comment with all these hacks then the algorithm will slowly shut off their referrals.
Thank you for your support. Its hopefully going to change in the near future as UA-cam's algorithm learns more about what genre's are being posted about.
I'm certain it will be corrected, and when it is it will for certain make a huge dent in correcting all the misinformation being monetized.
Thank you,
Vince
Good morning Vince! I was driving to work, and I got the thought to ask you what the little tool you use to protect the wire insulation when soldering is called? Id look around if I had the time right now. Thank you.
God Bless
Thank you for your support. I'm sorry I don't know what tool you're referring to? Do you mean the jig holding the spindle cable leads when I'm soldering on the spindle connector? God Bless You As Well! Vince
I live for you to talk smack on dummies. hahahaha
Thank you for your support. Vince
Maybe he's using a flux core leaded solder on the last part of the video? The good quality ones do work quite good, not saying what he's doing is correct but I do believe the solder he's using is acceptable if it's the correct type.
Thank you for your support ,but using solder without flux regardless of the type used is not the correct practice.
All solders require the use of flux for proper flow, wetting, and bond strength.
This is required for all soldering applications from electronics to plumbing.
Not using it is a content creator's way of posting half measure videos in hopes of getting views, as it all it takes is a simple Google search to see this is required if one is not aware.
The thing that's most interesting is how many of their audience practice what's being shown assuming its correct without any accountability taken from the content creator quite the opposite they get paid to show themselves doing the process incorrectly.
Everyone should be asking themselves why if these creators aren't well practiced in soldering, and understand all the components required to do it correctly, and safely are they making content featuring it?
I believe we all know the answer to this.
Thank you,
Vince
Mr. Vince, why you don't use db9 connector with VFD's client? I think the way you did it with your VFD hides and save the wires. Maybe you do it to meet what clients want and are willing to pay for.
This is correct, have a look here I'm ahead of you on your question for this client ...:) ua-cam.com/video/t2FIT1E2PyA/v-deo.html
Keep in mind its best to search my channel as I have almost 500 videos which usually will have one covering a question.
Thank you,
Vince
@@corvetteguy50 I saw this video i am talking about the vfd in 22 minutes
I don't understand, and would need more detail on the question. Thank you,
Vince
@@corvetteguy50 I rewatched the video link and now I understand your wiring. Thanks!
Great, thank you again for your support! Vince
Damn its a shame, I follow the first guy because his videos are entertaining and i am building the same CNC. Im definitely not following his wiring advice tho
Thank you for your support. Vince