They can be installed together. You'd better install from the lower version V12 to V17 higher version one by one. It is not recommended to install multiple versions of WinCC Professional in one system. Regular Step7 and WinCC advanced should be no issue.
99% the Motion control and the servo drive will be the same brand. The key reason is the communication fieldbus protocol as well as the telegram. If you do have to cross the brand, most common way is to use analog output to control the drive speed and read the encoder use the encoder module.
You can view the video, it is using the DC motor, but the idea is the similar MS04a. Setup Positioning Axis via Analog Output, DC Motor, and Encoder ua-cam.com/video/Od4cqjMst4Q/v-deo.html MS04b. Program DC Motor Positioning Control via S7-1200 and TIA Portal ua-cam.com/video/WNVbgi67HfQ/v-deo.html
Are you using S7-1500 PLC? Which revision of TIA Portal are you using? I assume you are using S7-1200 PLC or old revision of TIA, they don't support virtual axis.
Thank you very much for your effort . in simotion scout i was using _LineModule_Control function block to enable 36KW SLM infeed but now i am using TIA PORTAL V13 and i don't found this function block . Please how can i find and using this function block ? . Regards
@@EngOmar-kz9qv No, sorry, MC_Power is used to power up axis. For the Smart Line Infeed enable, maybe search "xx Infeed xx" FB, the "Linemodule" may be changed to "infeed"
![MS03c. [Siemens Motion Control] Reset, Power, Home, and MoveJog Instructions in TIA Portal [5/10]](http://i.ytimg.com/vi/1Nv-bam3vvc/mqdefault.jpg)
![MS03c. [Siemens Motion Control] Reset, Power, Home, and MoveJog Instructions in TIA Portal [5/10]](/img/tr.png)
![MS08b. [Stepper Motor] 1/2 Siemens S7-1200 PLC PTO Stepper Motor Control (Technology Object in TIA)](http://i.ytimg.com/vi/3BtAK2De0XI/mqdefault.jpg)
![MS06F-1. [Siemens S210 #06-1] Positioning TO Technology Object in TIA Portal - Configuration](http://i.ytimg.com/vi/jjAik6OPOnw/mqdefault.jpg)
![MS03d. [Siemens Motion Control] Move Absolute, Relative, Velocity, Stop, Halt Instructions [6/10]](/img/n.gif)
Very useful channel. Thank you for being such a channel
Greetings from Turkey
Thanks Buddy, Welcome!
Thank you for this effort
Thanks! Welcome to my channel!
Thank you for great videos
My pleasure! Thanks! I am working on the encoder/high pulses counter of S71200. Those videos are coming soon!
Great effort
thank you
Welcome! Enjoy!
Great explanation and that you. Would you perhaps have a video of setting up two synchronous axes?. If so, may you kindly direct me to that please.
Hope this video would be helpful ua-cam.com/video/hie46Yd37uI/v-deo.html
Thank you. very useful lessons. Please show how you can instal all tia portal version on one PC
They can be installed together. You'd better install from the lower version V12 to V17 higher version one by one. It is not recommended to install multiple versions of WinCC Professional in one system. Regular Step7 and WinCC advanced should be no issue.
@@electricalautomation Thank you very much
Great Videos
Is it possible to Axis that is not from Siemens with the TO?
For example Beckhoff?
99% the Motion control and the servo drive will be the same brand. The key reason is the communication fieldbus protocol as well as the telegram. If you do have to cross the brand, most common way is to use analog output to control the drive speed and read the encoder use the encoder module.
Is it possible to use s7-1200 cpu instead of s7-1500 cpu's? and as well as to use stepper motor rather than servo motor?
You can view the video, it is using the DC motor, but the idea is the similar MS04a. Setup Positioning Axis via Analog Output, DC Motor, and Encoder
ua-cam.com/video/Od4cqjMst4Q/v-deo.html
MS04b. Program DC Motor Positioning Control via S7-1200 and TIA Portal
ua-cam.com/video/WNVbgi67HfQ/v-deo.html
Hello, I cant see in my TIA portal option for Virtual Axis, u know where can be problem?
Are you using S7-1500 PLC? Which revision of TIA Portal are you using? I assume you are using S7-1200 PLC or old revision of TIA, they don't support virtual axis.
Thank you very much for your effort .
in simotion scout i was using _LineModule_Control function block to enable 36KW SLM infeed but now i am using TIA PORTAL V13 and i don't found this function block .
Please how can i find and using this function block ? .
Regards
Simotion is different system comparing with T-CPU or S7-1500T. In TIA Portal, power up a Axis need to use "MC_Power"
@@electricalautomation
if i want to enable 36KW smart line infeed, also i have to use
MC_Power ?
@@EngOmar-kz9qv No, sorry, MC_Power is used to power up axis. For the Smart Line Infeed enable, maybe search "xx Infeed xx" FB, the "Linemodule" may be changed to "infeed"