That white material is where it’s at. Also if you ever hit the old black looking conglomerate material. It’s loaded! Oldest stuff in the river. Original stream bed! Man I’m missing dredging! Awesome footage!
looking good Tim, at 6:43 I slide that top green carpet back to the first riffel, its gives you a slick plate and acts a a damper for the 3ed stage while running just a thought for ya, keep getting on the Gold pal.
Man I wish I lived anywhere other than California. I have a pump and high banker sitting in storage since 2009 that almost got confiscated after motorized Prospecting got band.
Hello sir how deep does your suction nozzle can go.. I made myself a home made suction jet.. With a 4inch water pump running with 10hp engine and it can only lift materials as dep as 4feet.. Beyond that deep it can no longer suck materials. To run it to the 21 inch sluice.. I'm using a miners moss as mat.. Thanx...
Kevin, I don't know if you're trying to be funny or asking serious questions. I also have watched a lot of videos on how sluices should be ran. But the best way to figure it out is by doing it. Experience is key to knowledge. There is no way for me to tell you the gpm. The V in the water flow is just one factor to let me know my sluice is running correctly. Next would be how fast is the material clearing out. If you will notice where the water is in the video, it's just above the bolts(again another factor) which it should stay that same depth all the way thru the sluice. I hope this helps. Good luck and heavy pans.
@@timellis5954 I've been spending hours trying to figure out what size pump would be recommended for what size sluice. It seems, due to my location, that I'd be better off building my drywasher and using it after the rainy season. Even though I built a sluice with dream carpet, and I'm sure you saw the post, I'm stumped.
I would recommend looking at sluices that are similar in size to yours that are on the market for sale and see what they recommend for gpm for their sluice or try and contact David that makes the dream mat and get his input on what you should use. The width of your sluice is going to play a major factor in gpm.
Hey Kevin, the A-52 is a hand sluicebox from Keene Engineering. The best way to learn dredging is doing it and testing the tailings, i.e. if the recovery is OK. The optimal settings can be pretty different for different situations. Good luck and take care!
Yeah, they cleaned out the main paystreak. But they missed the .8 I found in this video. I have more spots though and I'm sure I'll come across more. I just want to know what they got, for the amount of material they moved it had to be good.
That white material is where it’s at. Also if you ever hit the old black looking conglomerate material. It’s loaded! Oldest stuff in the river. Original stream bed! Man I’m missing dredging! Awesome footage!
Nice looking gold! I enjoyed the underwater video, in particular. Gives a good sense of the types of places where your gold was hiding.
Loved it!
Pretty Cool like the footage of everything nice Gold 😎👍💯🇺🇲
Aahhh, this stuff at 4:30 looks awesome, really hardpacked and old stuff. Good job, congratulations to the beautiful gold!
great work fam. keep the dream alive fam. what a blast coming by. nice AU fam. GOLD SQUAD OUT!!!
looking good Tim, at 6:43 I slide that top green carpet back to the first riffel, its gives you a slick plate and acts a a damper for the 3ed stage while running just a thought for ya, keep getting on the Gold pal.
Wow that is really cool! Thanks for sharing 😊
Nice gold Tim! Congrats ✨🤠
Right on Tim, that’s a good day in my book.
Top
Great Vídeo my FRIEND, New friend here. Greetings FROM DOMINICAN REPÚBLIC
Welcome and I'm glad you liked the video.
Nice gold Tim got to love this hobby
great friends greetings one tray from Indonesia
Just joined your channel look forward to your next one bud⛏⛏⛏⛏😁👍
I live in Ca. , I really miss that sound!
This is so what I want to do. I have a 1 1/2 one buying the pump next week. Thanks for the great video
I can take you out sometime if you want.
i would love to spend weekends doing this but im in an area not exactly known for any gold at all.
👍👍👍
Great video Tim. You will hit the honey hole soon enough.
Wow not bad Tim 👍🏻much shinny chunks
New to your channel my friend. I like it. Well in.
Man I wish I lived anywhere other than California.
I have a pump and high banker sitting in storage since 2009 that almost got confiscated after motorized Prospecting got band.
that's a great day of gold!
amazing my friend
A high pressure blaster (like Abis Dredging) would be a big help..👀🤔🤠⛏🌵
Gostei muito dó seu canal é sou garimpeiro 🙏
Looks like a good day in the water to me. New subscriber, helping you get to 500.
Thank you!
Awesome video man. Thanks for the great content.
I've been enjoying yalls dredging videos as well.
@@timellis5954 maybe we can collaborate sometime. You are down south right ?
@@twodudesonedredge yes, I'm in GA.
some pretty quartz and agate in there
Hi, André... Brazil..
DIOS te bendiga desde ARGENTINA NO BAJES LOS BRAZOS.🙋♂️👍👋👋😎
Wow nice Gold 👍👍👍congrats 😉
Super like amigo
Any reason why you don't bring a flat head screw driver and break the dirt apart and maybe drill into the crevices a bit more?
I do use a flat head most of the time. I'm filming solo so it's one hand on the camera and one hand on the nozzle while filming.
@@timellis5954 Ah, totally makes sense. Now you just have to invent an underwater tripod!
Hello sir how deep does your suction nozzle can go.. I made myself a home made suction jet.. With a 4inch water pump running with 10hp engine and it can only lift materials as dep as 4feet.. Beyond that deep it can no longer suck materials. To run it to the 21 inch sluice.. I'm using a miners moss as mat.. Thanx...
I have been down about 8 ft. It's a 15ft hose.
Awesome vid mate :) Saw you on FB dropped over & subbed.
Thank you! More videos to come.
What state are you in?
Ga
That's the A-52? What is the waterflow gpm? Is this pitch 1 inch for every foot? I've watched so many shows I'm losing track.
Kevin, I don't know if you're trying to be funny or asking serious questions. I also have watched a lot of videos on how sluices should be ran. But the best way to figure it out is by doing it. Experience is key to knowledge. There is no way for me to tell you the gpm. The V in the water flow is just one factor to let me know my sluice is running correctly. Next would be how fast is the material clearing out. If you will notice where the water is in the video, it's just above the bolts(again another factor) which it should stay that same depth all the way thru the sluice. I hope this helps. Good luck and heavy pans.
@@timellis5954 no, I'm not being funny...
@@timellis5954 I've been spending hours trying to figure out what size pump would be recommended for what size sluice. It seems, due to my location, that I'd be better off building my drywasher and using it after the rainy season. Even though I built a sluice with dream carpet, and I'm sure you saw the post, I'm stumped.
I would recommend looking at sluices that are similar in size to yours that are on the market for sale and see what they recommend for gpm for their sluice or try and contact David that makes the dream mat and get his input on what you should use. The width of your sluice is going to play a major factor in gpm.
Hey Kevin, the A-52 is a hand sluicebox from Keene Engineering. The best way to learn dredging is doing it and testing the tailings, i.e. if the recovery is OK. The optimal settings can be pretty different for different situations. Good luck and take care!
How much does it cost to start doing this
Depends on how serious you wanna get. You can start with a pan.
Good day on the river!!!🤟🏻
Would have been better had someone not cleaned out the paystreak I found.
@@timellis5954 someone went and cleaned out your spot?
Yeah, they cleaned out the main paystreak. But they missed the .8 I found in this video. I have more spots though and I'm sure I'll come across more. I just want to know what they got, for the amount of material they moved it had to be good.
I was below you in river and water was more muggy …:) probably from you :), you got nice red hard pack there
I thought you were going north of me. How did you do?
@@timellis5954 not that good , u see some of the gold on end of my video
Salam satu hobi, saya juga seorang penambang emas mini di Indonesia 👍🏻
Move.
How many grams of gold are found?
I do a weigh in at the end of the video
@@timellis5954 i know .but It's too little ...How many hours do you work?
It's a hobby, I'm not doing this for a living. And it's not work if you enjoy doing it.
im guessing the red pink is garnet
Yes, lots of garnet. Pink, red, and purple
mesin penghisapnya luar biasa mantap kawan.
what state
Ga
Класс!
Hola quiero Aser una máquina de esa
Why don't you use a picking tool?
I do when I'm not filming.
Драга за день столько намывает, очередной развод…..
Hey , you should tell me help you
Hi
Crystals rubin granate
💪😎👍🇧🇷 🐉 23
You can't just go on someone's spot and do this right
This is club property, so nobody really owns any of it or can lay claim to a certain spot. I've had people jump into spots I've dredged before.
Why would you bother...you would make more money working at McDonald's
Some days are better than others and because I really enjoy it. It's not work when you're having fun.
@@timellis5954 well said i take back my comment