This is a dream truck of mine...I had 2 hard bodies but still want one of these...true wide body means you widen the door panels but fender flares are dope! Thanks for sharing
This is going to be a great series. even though I probably wont like how it ends up looking. (not a fan of lowriders) but definitely I will enjoy how you build it. thats what im here for. Seeing how its built.
Just started watching your channel form the 10min build on the MR2. And this project is something I have never seen been done before. Just by puting on those wheels, I know it going to look amazing, and be one of the most uniqe cars i have ever seen!
My favorite small truck of all times when I was a teenager many years ago lol my first vehicle was a 73 620 it was super cool and now that I’m older I really want to pick up another one. Oh and yes this project is super cool as well. New subscriber but loving it already.
Love the build. I have a mate who put a ca18 in one of these only to find out it had a big end knock. He was pissed. The seller he bought it from would not answer the phone. Sooo... He drove to his house 2hrs away and walked in his living room, made the bloke he bought the motor from drive over 100km to pick the busted motor up and refund him. True story. Loved that ute.
Thanks to UA-cam recommendations you have a new subscriber, finally a build that not everyone and their cousins are doing! Looking forward to more videos!
This is BADASS. You know you can just grab some open wheel trailer arches from like a bass pro shop or somethin and just weld thoes in for the new front wheel wells
I’m so excited to see you start making the body panels similar to the rendering you showed us! Love watching that type of work on your channel! Great video man! Keep up the great work!!
All your widebody projects are making me want to diy widebody my Miata haha super stoked on what is to come with this! Keep up the good work! Build. Give. Repeat. 👌💪
I LOVE seeing more Datsun content. Especially 620 because I own a 77 620 KC. And I’ll follow your build since I’m looking to LS swap mine as well. Keep the vids comin!
Love it so far... can't wait for next weeks video to see what your rendering looks like. I'm thinking insanely wide... and suicide doors. Maybe chop or make the roof a removable hardtop convertible?
Drop spindles may help get you some usable suspension travel out of the front. Putting a bigger notch in the rear and raising the upper bag mounts will give some useable travel in the rear. Trailer fenders make good engine bay tubs
Nice pick... Old school Datsun 620 clean lines Dropped, cut, chopped ??? Next Why didn't you guys cycle the steering ??? What's up with the steering ??? Wheels gone rub lock to lock ??? Power steering ??? Good work good video
Hey man so where did you get your wheels? I'm in the process of doing a custom widebody kit on my 94 Nissan sentra, haven a hard time find wheels with negative off sets. And also you mentioned doing a sr20 swap on this bad boy? (I can hook you up with one.)
The fronts are gonna cause issues, particularly when you try to go round corners. You need to open up the front wing (fender) a lot more for tyre clearance for lock to lock on the steering. To give you an idea of how much you will need to remove, measure the diameter of the tyre then take a measurement of the diagonal of the front inner of the tyre to the rear outer of the tyre. The difference is the amount you will need to remove from the front to rear measurement of the wheel arch at the centre point of the wheel. Hope this helps
Does swapping front and rear axles from other trucks make it more easier? Like wide axles to avoid touching the firewall? Just my imagination, haven't done anything like that before.
I love this project and especially the wheels! Who else thinks this build is going to look stunning?
Love watching you from england . Like the way you build kits from scratch. Keep up the work .
Stoked to watch this build. Always been a fan of the 620. Used to have and want another 720. Garage mini built the sickest 720 years ago.
OMG, I cannot explain how much I already love this build.... fantatic!
This is a dream truck of mine...I had 2 hard bodies but still want one of these...true wide body means you widen the door panels but fender flares are dope! Thanks for sharing
This is going to be a great series. even though I probably wont like how it ends up looking. (not a fan of lowriders) but definitely I will enjoy how you build it. thats what im here for. Seeing how its built.
Just started watching your channel form the 10min build on the MR2. And this project is something I have never seen been done before. Just by puting on those wheels, I know it going to look amazing, and be one of the most uniqe cars i have ever seen!
My favorite small truck of all times when I was a teenager many years ago lol my first vehicle was a 73 620 it was super cool and now that I’m older I really want to pick up another one.
Oh and yes this project is super cool as well. New subscriber but loving it already.
Love the build. I have a mate who put a ca18 in one of these only to find out it had a big end knock. He was pissed. The seller he bought it from would not answer the phone. Sooo... He drove to his house 2hrs away and walked in his living room, made the bloke he bought the motor from drive over 100km to pick the busted motor up and refund him. True story. Loved that ute.
Found your channel after the MR2 video in 10 mins appeared in my recommendations.....thanks UA-cam, best recommendation ever. Subscribed!
I love how unlike most car youtubers you get right to the point
Widebody looks awesome even crude it's like cars and trucks say YES! THANK YOU.. I'M FINALLY NORMAL.
Super happy for u dude, followed ur Toyota mr2 build.. Hope this becomes ur business👍👌
The Datsun 620 is probably one of the coolest trucks ever made I’m excited for this build.
Thanks to UA-cam recommendations you have a new subscriber, finally a build that not everyone and their cousins are doing! Looking forward to more videos!
You and chase need to get yourselves a shop. You have the passion and skill set to go far in this business. #Favourite cartube channel
Already a dope build. The same thing I'd like to do for my next project. Sooo jazzed to see the end result man!!!
This is BADASS. You know you can just grab some open wheel trailer arches from like a bass pro shop or somethin and just weld thoes in for the new front wheel wells
New subscriber here all the way from Philippines!! Glad UA-cam recommended this video! Can’t wait for this build to be finished!
I’m so excited to see you start making the body panels similar to the rendering you showed us! Love watching that type of work on your channel! Great video man! Keep up the great work!!
OHHH SHIT there was one mad scientist now there TWO can't wait to see what you guys do
All your widebody projects are making me want to diy widebody my Miata haha super stoked on what is to come with this! Keep up the good work! Build. Give. Repeat. 👌💪
Holy fucking shit!! I already love this more than all your pervious builds 👌💯
I LOVE seeing more Datsun content. Especially 620 because I own a 77 620 KC. And I’ll follow your build since I’m looking to LS swap mine as well. Keep the vids comin!
Im so stoked for this build
Yes!!!! It begins!!!! I’m so stoked for this build!!!
Great idea for all people with rusted fenders on their Datsuns.
Im loving the build guys. .keep it up.
So sick! I already love this truck. Cant wait to see what you're going to do
love this 620 project, keep it up guys👍
“Comment below if you think the trucks going to run again”
🤣🤣 probs not but a hope so hahahahahahahaha
I just came. I had a 97 hardbody I parted with that was bagged in the front for the baby seat. Cant wait to see the end results.
Love from London also. Love the fact you build everythin yourself bud keep it up it will pay off
Now I gotta put air on my lowrider. Keep up the great videos guys
This truck is going to look clean AF when it's done & it already has bags !! Fuck Yes!👏🏼👍🏻🔥 looking forward to your unique fab ways man !! 😎🔥
no stearing at all haha, man thats a sick project! i'm stoked on it
I wish we had the datsun pickups here in europe, I really like this type of cars
Uhm golf 3 pickup?
This car looks so cool with these wheels... cant wait to see it become ever more cool
God I want this truck already! Crazy stocked to see the end!
The ending was hilarious. Great build too
Dude I love the work you do. The content, your style and your ambition. It’s very enjoyable watching your videos. Keep it up dude.
Not got time to watch this yet, but this sounds like a great project and will be watching as soon as I get home 🙌
Its insane already, beautiful wheels. I've finished the car in my head already, its extremely awesome
Congratz on 100k, like yesterday you had 30k, wow!!
Looks great I love it
Awesome build 😜😁😁😁
Can't wait to see this love the channel love from the U.K.
that wheels are so cool brow!!😎👏👏👏👏
So excited for this build fucking hell ! Keep it up my friend
This project is awesome, I can't wait to see all finished!!
I’m so excited for this build 🙌🏼
Subscribed. That is going to be sick
I’m diggin it! Widebody will be sick!
BUILT is back! And more insane than ever before
Great job 👍🏼
Dam can’t wait to see this mini truck finish product, you don’t see much here in UA-cam
Dude you and gingium have the most underrated channels ever I love the content you guys just need more funding
You guys should use cheap, utility trailer fenders to make wheel wells! This is going to be awesome when it's all BUILT!
This Lovely car look so stunning
Woooooow mega caaar and mega carmechanik
It needs more power baby
Yoo this build will be mad dope 😍😍😍
Love this one, and this channel should have 4x times more suscribers..
Ay shout outs to you bro honestly when you started doing widebody mr2 and to see where he at now is amazing. Love to see what you do in the future
And another masterpiece 👍👍👍
I'm so excited. So crazy
Love it so far... can't wait for next weeks video to see what your rendering looks like. I'm thinking insanely wide... and suicide doors. Maybe chop or make the roof a removable hardtop convertible?
cutting these wells hurt me so much. I love these small pickup builds, though
I was a little disappointed with the Audi build but this one will be epic and I’m excited for it for sure!
That thing looks maaaaaaad 😲😲😲🔥🙌
Thanks for your great content
Glad you chose a Datsun 👌
Love the logo at the end and the truck looks sick
Badass dude. Can't wait.
Can believe that has a l20 in it sounded real good idling in though it was a old smallblock at first miss my 620
Drop spindles may help get you some usable suspension travel out of the front. Putting a bigger notch in the rear and raising the upper bag mounts will give some useable travel in the rear. Trailer fenders make good engine bay tubs
Nice pick...
Old school Datsun 620 clean lines
Dropped, cut, chopped ??? Next
Why didn't you guys cycle the steering ??? What's up with the steering ??? Wheels gone rub lock to lock ??? Power steering ???
Good work good video
I dont even start the video and hit the Like thats my dream truck
If I were a cow......I would say you are "UDDERLY " amazing!!!!
I think you're more of a bear. You "bearly" gave that any effort...
Big ol Bois. Nice n smooth lookin
Such a great build, love the channel and the vids, keep it up!
Of course I subscribed this project is going to be wild and interesting
I like how old mate did all the work
God you cut those perfect fenders 😭 I needed them
Hey man so where did you get your wheels? I'm in the process of doing a custom widebody kit on my 94 Nissan sentra, haven a hard time find wheels with negative off sets. And also you mentioned doing a sr20 swap on this bad boy? (I can hook you up with one.)
I can’t wait to see this finished!
Yes sir! This is how we throw down in the south! 💪🏽CHOP & DROPPED!
man i wish i could have that truck its gonna be so killer!
Good videos 😎
Sickkkk 🤯
This guy deserves over 2mil subs he will reach this one day and ima stick around and when that day comes ima be here
Wish I had friends like you guys 😢
That ending was priceless lol
The fronts are gonna cause issues, particularly when you try to go round corners. You need to open up the front wing (fender) a lot more for tyre clearance for lock to lock on the steering. To give you an idea of how much you will need to remove, measure the diameter of the tyre then take a measurement of the diagonal of the front inner of the tyre to the rear outer of the tyre. The difference is the amount you will need to remove from the front to rear measurement of the wheel arch at the centre point of the wheel. Hope this helps
A bagged and bodied truck 😍😍😍😍😍 . I hope I win this one lol .
Awesome! 👍🤑
Oh heck yes! Love this Datsun!
I am very very excited now
Does swapping front and rear axles from other trucks make it more easier? Like wide axles to avoid touching the firewall? Just my imagination, haven't done anything like that before.
perfect-ish...new favorite word!