Це відео не доступне.
Перепрошуємо.
How To Lower Forks / Cafe Racer / DIY Shorten Motorcycle Suspension
Вставка
- Опубліковано 3 лют 2023
- You can finally JOIN my team and become a MEMBER of my community where i'll be posting sneak peaks and some behind the scenes material for my die hard dudes!
***If you would like to help me out with my builds, please go Subscribe to my Patreon: patreon.com/MancaveCustoms
Hey tube!
Thank you so much for watching!
In this quck DIY for lowering / shortening Yamaha XS400 Forks.
Obviously I leave quite a bit out of the video, so if you have any quetsion or didn't understand any steps - let me know in the comments.
Thank you so much for watching! Please consider leaving a like and a comment and of course, subscribe. If you would like to help me out with my builds, please go Subscribe to my Patreon: patreon.com/MancaveCustoms
Very cool. Thanks
Glad i could be of help mate, what you're building?
Well at the moment I'm not building anything I'm kind of doing my research before I buy the bike but I am considering a Honda 600 R or 650L. Trying to get as much knowledge as possible before picking out the bike. I really appreciate your video.
yesssss! content and production keeps getting better and better doood. keep at it!
Appreciate it!! Thank you dooood
Hey great job... to the point! made it easy to understand... thanks!
Thanks Jimm! Let me know if u need any other help!
great tutorial
Cheers thank you!
Nice one. Cool the ninjas jumping on the buttons :D well explained the process zoom in and out with blurring became cool also. Hard work pays off!
Glad you liked it! Thanks Chris
Thanks I'm gonna shorten my 2004 big dog chopper. Changing my front rim from a 21" to a 26" but keeping almost the same rake.thanks again
Good stuff man! Make sure to make some videos. I'd love to see your result!
Nice! thanks! 😂 🏍️
Any time! Glad it was useful!
Nice work, helped me out plenty cheers!
Glad it helped! Let me know if you need any more DIYs 👊🏼
I actually want higher forks
dont think theres a simple solution for that, unfortnately. Depends on what bike but normally theres a bunch of cheap forks swap options.
Thank you for this clear and concise video. Can I ask you to get and use some safety glasses? Especially when dealing with any springs--and angle grinders. I temporarily went blind in my right eye due to a detached retina. It was scary. And laying face down for a solid week is awful. I'd just hate to see somebody go through that unnecessarily.
Shoooks that sounds shitty! You know I've improved since. Was listening to Joe Rogans pod with the owner of Henesy tuning company from USA and he's had multiple eye surgeries from fabrication work without protection. thanks tho, I'll make sure to be more careful!
@@mancavecustoms13 It's honestly so awful. The worst part--other than an entire week flat on my stomach--was waking up during the surgery. 😳 Can you imagine suddenly becoming aware that there's a little camera and a light saber thingy inside your eyeball, going zap zap zap. 😭😭😭 But thank you for taking my message to heart. I still forget occasionally, too. But then I stop and put on my glasses--and hearing protection if it's a noisy grinder or the like. (I've also gone a little deaf, too. Ugh.)
Cool presentation 🔊
Thanks so much!
Great video, but I would suggest to use a solid spacer for the dampers instead of reusing the cut off spring. Cheers!
Hey, Thanks for the feedback. I think its a fair point, however in this application they had no chance to tangle up with each other. I didn't mention that, thats true. If it'd be done 'the right way' i agree to you. But also if it would be done 'the right way' it would probably just have proper lowering springs. :P
@@mancavecustoms13 well, if it works, it works right? :D thanks for commenting on my video btw! Peace
@@yoshuavillar Spreading the Algorythm love my guy! Take care
Thanks for tutorial
Impressive skills, on the video editing and mechanics, I wonder, what else can you do? Can you build a house? 🙃
Thats in my 5 years plan! Thanks for the feedback
@@mancavecustoms13 Perhaps you should sing a song about that 😜
What kind of bike no it doesn't matter but I have the same tubes
on my bike and don't believe the original supposed to be cerianis
It's Yamaha XS400 1984
It was a little hard to see, but you only put back the the large piece of the spring right? The 4cm cut off were thrown in the trash? It just looked to me, like you put the 4cm cut off piece in aswell? 🤷
I think he putted the 4cm spring to the bottom of the piston and large one at the top side as usual.
He inserted the 4cm cut off spring and original spacing spring together.
Sorry for the late reply my guy, yes, I placed the original spacer and the cut off back on the fork piston, as that is what makes the fork tubes stay deeper in the fork legs. I hope that makes sense!
The bike is looking mean!!
Thanks brother 👍🏼👊🏼
😎👍
Thanks!
Any time brother, let me know if you need anything else!
Great video brother ❤ come to India🫶🏼
Apreciate it! I surely one day will! Which part to i go to?
@@mancavecustoms13 tou can start from Uttarakhand 🏔️ as I live here😉 and then complete India tour
@@cafe_GT_650 I wish it would be as simple as 'complete India your' 😂work, money 🤭
@@mancavecustoms13 yes yes exactly
@@mancavecustoms13 your insta sir ?