Man, I had a GSR and 2 swapped civics back in the day, and can identify the sound of a B series revving out from a mile away. Have to say that this build has really taken me back to when I lived and breathed these cars. And yours is definitely one of the best built and SOUNDING B's I've seen.
This build brings me back. My first Honda was an EF hatch. I absolutely hammered that little 1.5l for all it had, until it blew up. Swapped in a good old B18B and the car was the fastest thing ever to 17 yr old me 😂. Great build guys loving this content! 🤟
A really useful tip for removing the glue residue from tint is use some windex or glass cleaner WITH AMONIA and a piece of soft steel wool and it will literally just melt off the glass it’s so fast and easy and works like a charm
I had an eg hatch 15 years ago. B18c5 swap. That car was a hoot! 13 sec 1/4 times on street tires. I still have a clip of me ripping it on my youtube page. That thing was so much fun
I was never interested in these cars in my youth, but now that I've matured and wised-up, I've come to love them, and this EF really speaks to me. Classic 80s goodness all-around. Keep up the great work, guys!
Radius rod bushings are in backwards. The narrower end goes towards the washer, fatter end towards the subframe. Excellent upgrade though, lots of people forget to do them or just go to a traction bar.
Humble tips: 80% tint the windshield, 30% tint the rest of the glass. Space the steering wheel on the hub. Consider a dished steering wheel. Could gain 4" of offset towards the driver.
I love when he was like "I am not sure about bouncing it off the rev limiter". 4 seconds later he bangs it off the limiter 2x haha. I would do that also!
I have this exact swap in my ED7. After 3 or 4 years together and apart again i think this year it’ll actually see the road. These videos have really kicked the motivation back into me. 🤝🏻
US Bumper with the lip looks great. I used to have a type R swapped G with a low tacho and it was always fun watching passengers reaction when the tacho went off the edge
09:36 did it start raining? Can't think of anything better than working on cars with rain hitting the roof. Thanks for a perfect Sunday morning. Cheers from Aus!
Interesting choice to go with an Ebay Crank Damper after being unsure of the reliability of an Undamped Crank Pulley. Especially after spending so much money on the engine and it being a Very high revving engine. But, not my car... Also should pick up a ASR Steering Wheel Adapter/ Extender to Adjust your Wheel Position.
@@speedacademy I don't know, a lot of duplicates and replicators out there. 😬 Edit: After looking it up, all Reputable Sources for OEM Honda Branded Crank Pulley (including other Part Numbers that fit) show it's been fully discontinued. I understand that's kind of the only choice. But still after putting in, I'm assuming, more than 8-10k (USD) in the whole project. I would still have looked for an ATI or Fluidampr. It just seems out of touch to not care about something like that.
24:31 Good to see some companies reproducing some JDM front end parts, including the extremely rare turn signals. Hopefully you're working on CRX front end parts too! -from an EF7 owner
I've been watching you guys a while back, but I do miss your S2k track series when you built cars to go on track. Doing modifications and see how they translate on track.
You guys really bring me back to the '80s -'90s life! With this EF build and the Saturday morning cartoon excitement! Keep up the good work guys! Lovin it! 🤝
I love your content and really appreciate the work you two put in. I have a white EF hatch so this series makes me so happy to watch. Please keep it up guys!
Wish my tint would have come off that easily. When I pulled it off my 86 CRX it was so baked and old it just came off in small chunks! Took so long but so satisfying when it was done!
Great job, fellas! I had an ek with a B16 and another ek with an LSVTEC swap back in the day and this surely brings back memory. I need to build another Honda!! The only Honda I have left is my S2000 and CBR1000RR. Keep up the great content! Love you guys. ❤
Best build series yet, though I still loved the BMW wagon fabrication pron. I know race track episodes don’t YT algorithm well, but I can’t wait to see these cars let loose the way god intended! :)
I got my origin h Ef9 bumper and the replacement indicator lights a few months ago, once I move to my new place in about a week I'll have the space and time to mount it properly. Looks good, I also purchased Ef9 headlights and a filler bar, just need a hood.
hey guys did mounting the sway bar with that spacer work or is the angle wrong for the link connecting to the arm? would love to know before i get some billet spacers made for mine as i have this issue!
You guys picked good parts. Big fan of Hardrace in general, all my suspension bushings are Hardrace. After sampling the spherical joints they offer I should have gone with those, but still, their bushings are every bit as good if not better than OEM/Spoon/Mugen.
The grounding to the stud… I have my grounded to the same place as yours and I too have not noticed any power loss. Not sure why I grounded it there as well, I’m sure I had my reasons 12 years ago but like you guys, the internet had mention that my ground wire was in the wrong spot as well. 😂
Love your video man ! I also have an EF that my brother gave me and it is in very bad condition. Hopefully I can rebuild the EF considering many parts are hard to find and very expensive for me.
The original honda designs of the EF and the japanese model have the lip, mirrors and door handles color matched, so much cleaner. The only reason they are black was to save money. Only the belt molding was ever intended to be black on base cars and color matched on top jdm models as well Si, SiR, 25x, 25XT
I believe the tension rods in the front have to do with caster control more than anything. Of course you can make the caster goofy by mounting left and right upper control arms backward by accident, but thats another problem. But def they have little to do with toe and surely nothing with camber.
you might consider taking a melanin pad to the browning area on the strut towers in the engine bay. if that doesnt help, maybe paint that area. otherwise this car is sooo clean and really making me want to build a civic or crx hatch
The vtec front bumper ( over in europe they came on the EE9 chassis which had the 1.6 B16A ) looks a bit off with a none vtec front. As for the rest, I'd say it's perfect😘👌
I just wish the TC2 had the same love as the Civic. My car is underrated and I can confirm I’ve gapped my fair share of Hondas. I’ve even stayed ahead of early 2000s stock WRXs
I think for US/CA where our vehicles are overall much bigger than Japan, the larger bumpers provide a bit more safety in low-mid speed collisions. The true JDM front end is pretty much show car-only now…seeing as how they cost about $4k to get a decent complete setup.
@@ethansotelo755 oh absolutely! I used to dump it immediately but now that I’m older….no thanks. I like showing up places without being soaked in my own sweat lol
You guys should cash in some of your considerable influence with Continental and push them to make some 215/50r15 tires for those of us running 15x7 wheels
Saturday is not Saturday without an episode from Speed Academy. 🔰
💯
Exactly
And gears and gasoline. They go hand and hand.
@@turbo_brianyep! These are my Saturday morning cartoons!!
That’s Sunday for New Zealand 🇳🇿
Man, I had a GSR and 2 swapped civics back in the day, and can identify the sound of a B series revving out from a mile away. Have to say that this build has really taken me back to when I lived and breathed these cars. And yours is definitely one of the best built and SOUNDING B's I've seen.
I love B series sound. I love the K series - they are awesome engines - but don’t sound that great to me.
Now can you remember how much hate is b series owners for back in the early 2000s?
Moooooossssseeeee
The honda B series,Oh my God that beautiful beautiful sound vteeeccchhhh,music to my ear.What a nice build DP & Pete good job guys ❤❤❤
painting the lip white was 100% the right choice. 👍
This is Saturday morning cartoons for adults. Always a great way to start the morning.
This build brings me back. My first Honda was an EF hatch. I absolutely hammered that little 1.5l for all it had, until it blew up. Swapped in a good old B18B and the car was the fastest thing ever to 17 yr old me 😂. Great build guys loving this content! 🤟
And this is how "happy ever after" story should be
That VTEC howl! Sounds like a long tail cat in a room full of rocking chairs ❤
What this car needs is a set of Recaros reupholstered with period SI fabric, which I have many many yards of
YES
Where would one aquire that fabric?
B16B is Gods motor for that Vtec sound and crossover. IMO best sounding b series out there
Absolutely love this channel. My favourite car guys on youtube. Perfection and maturity modifying cars. Love it. Well done guys
That engine sounds glorious! Wowzer.
The B16B is absolutely the most hilarious motor I’ve ever driven. Good memories here.
that is the unique sound of B16 / b18c motor. this is cause by the intake!
A really useful tip for removing the glue residue from tint is use some windex or glass cleaner WITH AMONIA and a piece of soft steel wool and it will literally just melt off the glass it’s so fast and easy and works like a charm
Those scour pads for doing non stick dishes are a safer bet on glass
Use a steam cleaner with w microfiber between the gun and glass
When I was removing the tint off my CRX I used a steam cleaner.
Simple green and a scuff pad or steel wool, just don't let the simple green dry on the panels or it will leave streaks
I am said one girl, who is watching and has an 89 EF hatch lol! Thanks for the tips and help finding parts for my build!
To me the EF hatch will always be the ultimate Civic. Double-wishbone + fishbowl visibility = win.
I had an eg hatch 15 years ago. B18c5 swap. That car was a hoot! 13 sec 1/4 times on street tires. I still have a clip of me ripping it on my youtube page. That thing was so much fun
I was never interested in these cars in my youth, but now that I've matured and wised-up, I've come to love them, and this EF really speaks to me. Classic 80s goodness all-around. Keep up the great work, guys!
Honda the power of dreams, you guys lived it! ❤
Radius rod bushings are in backwards. The narrower end goes towards the washer, fatter end towards the subframe. Excellent upgrade though, lots of people forget to do them or just go to a traction bar.
Humble tips: 80% tint the windshield, 30% tint the rest of the glass. Space the steering wheel on the hub. Consider a dished steering wheel. Could gain 4" of offset towards the driver.
What a perfect EF! I actually really dig the USDM front bumper. Excited to see them both on track!
Thank you for doing justice to these wonderful vehicles and drivetrains!
Not a Honda guy but this build is so nice it makes me want one. Great job guys.
I love when he was like "I am not sure about bouncing it off the rev limiter". 4 seconds later he bangs it off the limiter 2x haha. I would do that also!
Love this hatch !! 😮 is a beuty … well done guys !
Lovin the EF content. Thanks for choosing our JDM EF9 bumper conversion. Looks so clean with your wheel combo.
you need 88-89 bumper mounting brackets to fix that gap in the ef9 bumper
I have this exact swap in my ED7. After 3 or 4 years together and apart again i think this year it’ll actually see the road. These videos have really kicked the motivation back into me. 🤝🏻
Just saw you two on G&G! Awesome job as always!
Honda wizards,great series thanks Speed Academy.Cheers from North Macedonia Europe💪
The overall stance and wheel tyre combo is exceptional.
US Bumper with the lip looks great. I used to have a type R swapped G with a low tacho and it was always fun watching passengers reaction when the tacho went off the edge
09:36 did it start raining? Can't think of anything better than working on cars with rain hitting the roof. Thanks for a perfect Sunday morning. Cheers from Aus!
The ef isnt gunna plow without a rear sway bar. Its one of the best cars for FWD oversteer. Plus the rear bar you put on is a tiny SI civic bar.
As always quy's, awsome work. Dream build wright there
Oh man this takes me back to my Honda days, thanks for the memories fellas 👊🏼
Interesting choice to go with an Ebay Crank Damper after being unsure of the reliability of an Undamped Crank Pulley. Especially after spending so much money on the engine and it being a Very high revving engine. But, not my car... Also should pick up a ASR Steering Wheel Adapter/ Extender to Adjust your Wheel Position.
It’s an OEM crank pulley from EBay…
@@speedacademy I don't know, a lot of duplicates and replicators out there. 😬
Edit: After looking it up, all Reputable Sources for OEM Honda Branded Crank Pulley (including other Part Numbers that fit) show it's been fully discontinued. I understand that's kind of the only choice. But still after putting in, I'm assuming, more than 8-10k (USD) in the whole project. I would still have looked for an ATI or Fluidampr. It just seems out of touch to not care about something like that.
That back location you used for the ITR ground is sometimes used for a power steering line bracket
24:31 Good to see some companies reproducing some JDM front end parts, including the extremely rare turn signals. Hopefully you're working on CRX front end parts too!
-from an EF7 owner
I've been watching you guys a while back, but I do miss your S2k track series when you built cars to go on track. Doing modifications and see how they translate on track.
Great builds on these Civics. They look super fun!
You guys really bring me back to the '80s -'90s life! With this EF build and the Saturday morning cartoon excitement! Keep up the good work guys! Lovin it! 🤝
My first hot rodding experience was a turbo ls/vtec integra. You guys really hitting me in the nastalgia feels.
I truly enjoy yours guys content, its so much more relatable then the other car UA-camrs who churn out content on exotics
Before Trackday: this nice EF Civic would quickly deserve a pair of decent seats 😉
Happy v-tec noises!
Thanks for fixing that ground wire. Awesome episode!!
I love your content and really appreciate the work you two put in. I have a white EF hatch so this series makes me so happy to watch. Please keep it up guys!
Really appreciate the content you're putting out for us to watch. Great job with these two Civics.
Wish my tint would have come off that easily. When I pulled it off my 86 CRX it was so baked and old it just came off in small chunks! Took so long but so satisfying when it was done!
The looks of this car are perfect!
Made me miss my ej1! Hardrace every front and rear suspension components! Track abused and never an issue with it
The tint removal footage is satisfying 🍻
Great job, fellas! I had an ek with a B16 and another ek with an LSVTEC swap back in the day and this surely brings back memory. I need to build another Honda!! The only Honda I have left is my S2000 and CBR1000RR. Keep up the great content! Love you guys. ❤
Best build series yet, though I still loved the BMW wagon fabrication pron. I know race track episodes don’t YT algorithm well, but I can’t wait to see these cars let loose the way god intended! :)
I got my origin h Ef9 bumper and the replacement indicator lights a few months ago, once I move to my new place in about a week I'll have the space and time to mount it properly. Looks good, I also purchased Ef9 headlights and a filler bar, just need a hood.
Great job David ! Car looks great sounds strong and healthy. Can’t wait to see it on the track! Keep up the great vibes
hey guys did mounting the sway bar with that spacer work or is the angle wrong for the link connecting to the arm? would love to know before i get some billet spacers made for mine as i have this issue!
Usually EDM EE8/9 Speedometer should fit Rpm is until 9K and in KM/H and way more clean
At first I thought Pete might be exaggerating but it does sounds god damn good
I love how it turned out.
Man the ef came out great!! But the eg is gonna spank it! Great build off!
Well done boi’s!!! It’s all coming together
Nice!! I have a full HARDRACE suspension on my EF as well
that civic vtec sticker on the back is monumentaly crocked :DD
You guys picked good parts. Big fan of Hardrace in general, all my suspension bushings are Hardrace. After sampling the spherical joints they offer I should have gone with those, but still, their bushings are every bit as good if not better than OEM/Spoon/Mugen.
That wing looks sick but 100% agree without a lip kit or other aero its aggressive
The grounding to the stud… I have my grounded to the same place as yours and I too have not noticed any power loss. Not sure why I grounded it there as well, I’m sure I had my reasons 12 years ago but like you guys, the internet had mention that my ground wire was in the wrong spot as well. 😂
Awesome build.
Only dislikes are the front corner lights and turn signals. I much prefer amber. More color in.the front of cars is better to me.
This channel is so underrated
Looking real good! Love the EF its so cool!
You can’t ever have too much wing! Don’t be afraid of the big wing!
Damn that final product turned out incredible guys.
Couple of sparco seats would be sick
My only issue with the Hard race stuff is the gaudy blue. It'd rather have all silver or black.
She's a beauty 😍 the show down gunna be wild, can't wait ❤
I am restoring a 1990 CRX, and mine also had the purple tint with the annoying glue residue. Does it come that way from factory?
I'll have you know that bagged gifts are perfectly acceptable! (I am very much too lazy to wrap presents)
ESSENCE SANS PLOMB 😂🥖🇨🇵😂 as a French Canadian, this was funny to hear 😂🤌
Thank you guys 🫶
Love your video man !
I also have an EF that my brother gave me and it is in very bad condition. Hopefully I can rebuild the EF considering many parts are hard to find and very expensive for me.
Those wings are always perfect ! Should Deff leave it!
The original honda designs of the EF and the japanese model have the lip, mirrors and door handles color matched, so much cleaner. The only reason they are black was to save money. Only the belt molding was ever intended to be black on base cars and color matched on top jdm models as well Si, SiR, 25x, 25XT
Bad ass EF💪my favorite Civic
Chill EDM with a mod montage is a great vibe 👌
I believe the tension rods in the front have to do with caster control more than anything. Of course you can make the caster goofy by mounting left and right upper control arms backward by accident, but thats another problem. But def they have little to do with toe and surely nothing with camber.
you might consider taking a melanin pad to the browning area on the strut towers in the engine bay. if that doesnt help, maybe paint that area. otherwise this car is sooo clean and really making me want to build a civic or crx hatch
I would love to see what this would look like with with some te 37 in bronze! But man all of your guys Honda are really nice looking!
Such a beautiful mint Ef hatch.👌🏽
The vtec front bumper ( over in europe they came on the EE9 chassis which had the 1.6 B16A ) looks a bit off with a none vtec front. As for the rest, I'd say it's perfect😘👌
what happens when the rear lower control arms move and the rsb articulates. won't it pivot and hit the exhaust??
DABX is a pretty cool series of plates tbh
I just wish the TC2 had the same love as the Civic. My car is underrated and I can confirm I’ve gapped my fair share of Hondas. I’ve even stayed ahead of early 2000s stock WRXs
Tell me more about that blue Civic EG sedan in the background @12:17
I think for US/CA where our vehicles are overall much bigger than Japan, the larger bumpers provide a bit more safety in low-mid speed collisions. The true JDM front end is pretty much show car-only now…seeing as how they cost about $4k to get a decent complete setup.
You guys need to do a Kraftwerk supercharged B series nobody ever does that. I wonder if that is a "K" killer 🤔
While that would be sick, it sits in the location of the AC compressor so it would be a case of sacrificing AC to make it work.
@@Streeter_NSXI’m starting to appreciate having AC in my Hondas more now. Before that was the first thing to go! 😂
@@ethansotelo755 oh absolutely! I used to dump it immediately but now that I’m older….no thanks. I like showing up places without being soaked in my own sweat lol
@@Streeter_NSX get there with half the horse power but at least we don’t stink 😂
Still bumped out that you guys didn't do a itr swap. It would be more suitable match for the ls turbo. Overall build looks great!
Naptha Gas (coleman camping fuel) will remove tint glue easily. It's basically what is in goo gone, I believe. It can damage plastic, so use caution.
You guys should cash in some of your considerable influence with Continental and push them to make some 215/50r15 tires for those of us running 15x7 wheels
super clean guys! keep it up :)
EF is the winner already. The EG turbo will overheat on track after about 6 laps fully on it.