Unbelievable Gas Air Compressor Transformation... Binks Lo Boy
Вставка
- Опубліковано 11 жов 2022
- Death trap or brought back to life?
Crap I used in the video to make this project happen.....
Physical contact tachometer digital: amzn.to/3SXOsg7
Inspection camera for phone: amzn.to/3yCimym
Lettering brushes I use: amzn.to/3EwzFVf
Lettering paint"One-Shot": amzn.to/3SXpltH
Transfer Paper for sign painting: amzn.to/3MtLM7A
After Thoughts about the Video: The pulley on the gas motor is way too small but that can be a good thing as this will put fewer "miles" on the pump. The Quincy pump on this is rated to run 400-1000rpm with the highest also being the fastest cycle/pump up time. I would have swapped the pulley but it appears to be rust welded pretty good. Future me will have to worry about that one.
Quincy 210-1 rated for 400-1000rpm 2.82 to 6.34 CFM at 100psi
SUPPORT THE CHANNEL or support the SHOP DOG's treat addiction:
Buy Ginger a new bone: www.paypal.com/donate/?hosted...
sixtyfiveford
sixtyfiveford/
65 Ford
65ford - Навчання та стиль
Finally someone cleans before starting work.
Awesome restoration, probably looks better then when it was new, that lettering really gives it class 👍. Your channel should have over a million subscribers, Ginger alone is good for at least 1 million, she is so cute 😍.
Hey thanks. I think it turned out sharp. Ginger should!
Awesome restoration Moe, the color is sharp and I like the painting stick support trick.
Thanks. They call it a mahl stick and it makes a world of difference.
That Quincy QR25-210 is no joke. Pressure lubed, built to run 24-7, and one of the best. Just the pump retails new for around $2600
I love the Quincy Pumps and my main compressor was built around a QTS-3.
Good job. Interesting compressor. Nothing stops you. I think that dog may need a raise. Pretty good helper.
Thanks.
At first I was 'meh' on the color, but after the white lettering and handle you had me sold on the Chrysler blue. Looks great! Love your videos.
Hey thanks. I kept thinking I was going to repaint it but now I think it's fantastic looking.
I am glad to see that you found an employee that wasn't on break to help you..... LOL.
I truly did laugh out loud when you checked the points 🤣🤣🤣🤣🤣🤣
I love the Quincy products. It’s the standard we use as life support for commercial diving. As solid and reliable as they get.
absolutely
Again - stellar vidjayo!!! Keep digging up the “aged” and repairable stuff - love it !!
Hey thanks
Great little restoration, I love doing the same thing, but to good old British stuff, as I'm over in the UK. The old stuff is so well made and actually has character.
Very close to the Quincy blue. Well worth time/effort
That's exactly what I thought after I painted it. The old Quincy blue was nearly spot on to this.
18:34 That wasn't an employee. Yes, looked like a regional manager but that was just a coincidence.
That’s hilarious !!! Lol
Lol
This is awesome! Love the Mopar blue, and that final touch with logo painting was fantastic my guy! Keep it up love watching the videos and seeing all the cool old treasures you find to fix.
Hey thanks.
I love how you just repair something so it’s presentable and useable.
I was brought up with the villiers engines and then the legendary Honda gx engines.
We had some briggs and Stratton engines but parts were few and far between here in UK.
Great work yet once again. The solid old stuff is getting more important all the time.
Absolutely!
Absolutely love your videos and rebuilding, restoring, repainted beautiful pieces of Art
Hey Thanks. It's been fun to have in the shop just to look at.
Love the colors, and vintage look.
So nice to see old quality made equipment being brought back to life. Great video!
Hey thanks
Love it. I also love the display of the collection at the end.
Hey Thanks.
Love these old compressors. I save all the fittings and switches off the ones that get scrapped. Wish my parts boxes were closer to you all....I don't need all that I've saved.
tHanks for the video.
You're awesome
It looks great, good choice of color. They made things to last back in the day.
This is not only refurbishment, this is mechanical-art! Really nice and sweet! Thanks for your video 💪💪👍👍👍
Thanks
The blue was the right choice for paint color and the white lettering just pops amazingly.
Great job👍
Hey thanks. I think it turned out sharp looking
You're amazing at returning things back to their glory! Keep up the work👍
Thanks a ton!
Restoration( successful) always feels that special good
Man, do I respect you for your knowledge!
Thanks
I love that you do these types of videos. UA-cam is filled with restoration videos. Sometimes you just need to get a quality tool working!
Hey Thanks.
Good OLD stuff! And a flat head Briggs will ALWAYS run eventually if i's not exploded. IF you ever run into a Briggs gas tank with pinholes, get a tube of Seal-all from the Dollar store or hardware or parts place and after cleaning the tank and blowing it out, just squeeze a blob out where the holes are and let it set a while. That's all it takes and a blob will level itself out and that's it. No more leakages. I've used that on several Briggs tanks and nary a drop of ethanol gas has emerged from foresaid cavity. Sorry things are so bad that Ginger had to go work part time but maybe you'll get her employee discount. FINE compressor and it'll come in handy, NO doubt! BLESSINGS, Pal!
I am always amazed when you do restorations.
Thanks. This was a fun project.
Looks great! you can't beat the old iron, things were made to last back then.
Absolutely!
That came out fantastic! Well done.
Thank you very much!
Very talented!! Beautiful Work!!
Hey thanks
That blue and white reminds me of vintage ford tractors from the same era. That's a great collection of vintage American tools you've got there, I've noticed here in the UK in recent years more and more people are recognising the value in old tools and machinery and that is being reflected in the prices and they aren't ending back up on the market so my guess is most of the people who are buying them are buying them fixing them up and using them or using them for spares. Nice bit of sign writing btw!!
My take on people scooping up and using vintage tools is that new tool prices have risen a lot... and when you couple that with the quality of brand new tools being in the poor quality range, it makes sense to put some time, effort and a little bit of money into the vintage tools. Especially so when you consider their continued durability. Peace & good vibes! 👍🏻👨🏻🏭🇺🇸
- Max Giganteum
Nice job Moe! You are getting a nice collection going. Can't wait to see whats next?😀
I did not know how that air/oil pressure worked, learned something new today👌 I find those older engines are very reliable & easy to work on, also were often discarded & available, not too many today, at least in my area. Funny HD asking for help, Ginger was more help then what you usually would get LOL
Great restoration!!! Fabricator, Mechanic, Metal Worker, Engineer, Glazier ,Artist and most important good guy & dog lover.
100% in agreement about spark plugs & oil change. I bough a a head for a Ford Escort years back from a junk yard that had plugs in it. It was the first time changing an auto engine head. It started & ran great. I was getting 27 MPG town/hwy driving & I just did not get to changing the plugs.. My brother-in-law had nothing but criticism, "You did not change the plugs???" I would have changed the plugs but with 27mpg, new plugs why? That is what I was getting when the car was new. In my Trash or Treasure series, I do not change the oil unless/until I get them started.
It goes without say, another big 👍
Stay well, Joe Z
I stopped buying plugs for small engines almost 15 years ago and have only come across 1 that was cracked and needed a swap for a different old plug (I had a used one for it laying around). My savings has to be in the $1000s by now. Most of that are pushing $4-5 a plug now. For cars I only swap if they are hard to reach and or Platinum/ iridium as you can't see the condition of the electrode. I actually started putting only copper plugs in my cars as you can clean them whenever and also see the condition instantly by looking at them. I find a get better gas mileage with the copper plugs and being cleaned occasionally versus putting in 100,000 mi Platinum and never touching it.
I liked this video air comp. resto. I'm motivated more to build my own 30 gal. portable air comp. for myself! Thanks! Paul from S. Central Tx.
Hey Thanks.
I love this old stuff looks nice
Have one since the 70's built in 1969. It came with a 3 hp electric. I ran a 7 hp gas on it and used it for drywall texture work for years. I now have a 5 hp electric using it in my work shop. It like you explained it's a continuous run compressor designed for painting cars. I deleted the continuous run system, installed a regulator so it will cycle on and off and have used it in my shop for 35 years. I ran a 4 1/2" pulley on the gas and am currently running a 3 1/4" pully on the electric motor with a 125lbs shut-off. Good job!
Awesome. Gotta love how easy it is to modify old stuff(gas -electric).
Very cool, I like these tool/equipment restoration videos.
Cool, thanks
It came right back around, looks good
It's fun to gaze at in my shop.
Second video of yours I've watched, both were great. I have a compressor like that one, I was thinking of just scrapping it but this video makes me rethink it. I am now a subscriber.
Awesome
Cool how it opens the valves when it gets the pressure up, blue looks ok. Probably go for another 60 years now
It's a pretty neat setup. Thanks
You sir have an awesome skill. Thanks for sharing your knowledge
I appreciate that!
Great video as always! My ignorant neighbors make fun of me for fixing things. Given a lot of mowers away to people in need over the years.
Times used to be different, you would have been made fun of for not repairing stuff 20 years ago..... too much Chinese junk from HFT & folks don't know quality equipment when they actually see..... just cuz it is old, dirty, scratches & a little battered.
@@ranger175a2w so true so true. 😁
Every few years I gauge what people consider "old equipment". It used to be 10-15 years old. Now if something makes it 5 years and breaks people are writing it off as no big deal because it's old and served a good life.
Great job Moe, looks and works like new.
Thanks
Keeping an eye out for something like this. I have a small sandblasting cabinet in a shed that isn't near any 220v.
That came out looking fantastic Moe. Your lettering skills are very impressive!
You're Awesome. Thanks.
Moe man you always make things like new again almost. Thanks for sharing.
Thanks Charles
That is amazing, thank-you for sharing.
Glad you enjoyed it!
Looks awesome.
Thanks
Solid compressor, great job.
Thanks
Excellent, I love the old American made stuff 😀👏
Me too!
What a gem. I've been wanting to convert a compressor I have to gas, just for the fun of it.
your reaction to the big box stores is priceless sir and they are my sentiment's exactly nicely done
Just poking fun.
A brother ironworker once told me; "you can tell the Joe's by the fingers and the toes". Pretty cool. 28 years of stick, Tig, mig, fluxcore, oxy-acetylene, plasma, carbon-arc, and even a little bit of ND-Yag laser and electron beam, and I can still count to 21 all by myself. It ain't from sitting on the bench or in the bathroom neither.
Amazing. Your videos are the best. Keep them coming!
Hey Thanks.
I agree. Ginger stole the show. Seeing her puppy sit in Lowes warmed my heart. And your compressor video was impressive too. But painting that thing in Dodge blue was a mistake. Probably will throw a rod before the first tank of gas goes through it. lol.
Contact tachometer. This is the exact one I have: amzn.to/3SXOsg7
Great job, Moe 👍🏻
Thanks! 👍
Another Awesome Job Moe ! Really Nice Restoration . You Have A Nice Compressor Now.
Thanks 👍
Love your channel man. It's great to see a shop which is slightly messy but in a good way. One can see that you actually work in your shop and it's not just a pretty sound stage for a UA-cam "Hacker/Modder" poser. Keep 'em coming.
Thanks! Will do!
Great restoration the compressor looks brand new..you should get many years of service..i have to say you are one hell of a painter as far as lettering goes..i see ginger enjoys making videos with you she's a great and smart dog..see you on the next one Cheers friend 🍺🍺🍺🍺🍺🍺🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Thanks Rodney. Ginger is a good sport.
I love these videos I welded a tank I never trusted it I still have it because the pump is good but any time I used it it was outside around the corner with a wall between me an it ! Have a newer one now worth the piece of mind
Yeah, it gets nerve racking. You can always water pressure test them with a pressure washer. Push them to 1.5x operating pressure and if they pass you're good.
Good job 👍
That's a sweet old compressor! Nice vintage collection you have there.
Thanks. This was a fun project
This video was fun. Thanks a lot.
Thanks Bruce
That shade of blue reminds me of Quincy's OEM color. Nice job!
I was thinking the same thing after I painted it. I actually had to Google it and notice that they changed to way darker blue now.
It amazes me at how much you have learned to do in your life time. As always another great video my friend!!
Hey thanks
Props for the Home Depot employee comments !!
Awesome stuff Moe! Good choice on the blue with white accents.
Hey Thanks. It turned out better than I thought.
Nice work 🇺🇸
Dude, once again…. Great job!!
Thanks
Amazing as always 👍
Thanks man
When you broke out the Chrysler blue, I was like.... oh yeah, he's going to like that!
I used to paint my 318 & 340 engines that. I like the color!👍
Great resto.
Hey Thanks.
Another great video thanks a lot always learn something..
Thanks Carl
Gorgeous Job actually have one of them with an electric motor !! Thanks for sharing
Hey thanks. They're nice and quiet with electric.
@@sixtyfiveford yes have had it for years I also have a speedair that's gas well built unlike the garbage you buy today
Nice recovery on this one, Moe. You are an artist as well as a special tech.
Thanks. This was a fun one and definitely fun to sit back and gaze at.
Nice job
another great find. Love your videos. Greets from Germany
Germany. I lived in Bad Nauheim on Haagweg Strauss from 1973 to ‘74. Always wanted to go back but life happens. ☺️
Danke
You do the coolest stuff!
Hey thanks. This was a fun one.
Thanks for another great video, full of information and surprises! Give Ginger a treat from me.
Thanks, it was a fun project.
Awesome freehand lettering Moe 👍👍
Thanks 👍
No blue.😆 Nice job 👍
Agree that blue doesn't look to bad.
It turned out better than I thought.
Back in the day, a Binks spray gun was a master body man's greatest treasure.
I'm sure this has painted it's fair share of cars.
I had a Bink’s spray gun. They were top dog back in the day
It's a beautiful thing!
Hey Thanks.
Nice work Moe.
Thanks Jason.
Great job 65!
Thanks.
NICE FIX !!!!!!!! LOVE YOUR DOG ~~~~~~~~~~
Thank you!
Looks sharp bud 👍🏻🇬🇧
Thanks!
We’ll done as usual, Moe! ☺️ I’ve said it before, but Ginger is SO happy she’s your owner. 😂
She treats me well.
Love that ginger. I’m looking for one to rescue now
You know it's a damn shame that Binks will never have kids.....It was sitting on it's petcock for just a little too long...JaJa!!! Another awesome rebuild, sir. I have an old Montgomery Ward table saw I intend to rebuild. Watching your channel is really inspiring. I too have looked for that metallic green used on many shop machines and tools and didn't have any luck also. Pontiac metallic blue is in the same family but too blue. Rustoleum markets their "Hammered" enamel in "vert de gris" and also silver in quarts. A mix of the two might be close. Anyway, thanks for the awesome content. It's addictive!!!
Lol.
I try and buy up all the old spray paints I find and sometimes have access to colors no longer produced. A few years back I spent nearly a week looking everywhere for some of these older colors and came up empty handed. I actually went to the stores looking for the Rustoleum Hammerite green with not luck.
Love your vids and your fur buddy is awesome too
Thanks man
Jay the Florida pool pump motor repair guy. When Service Calls Longwood approved ! that was good info 2 see/know 👨🔧 just don't break the flywheel. lol.. sixtyfiveford.. Rust-Oleum gloss protective enamel black is my favorte !
that big pulley/drive wheel would make a really cool moped wheel
Nice. You did it again.
Thanks again!
I like those carbs with the plunger chokes. I have one on an old generator. You lucked out having a Quincy. Accessible repair kits. I am trying to find a kit for a Kargard.
We had the same compressor at the work had an electric motor, used for construction crews for nail guns.
Loved it.