How to Install a Roof LED Light Bar on a Ford Bronco! - Feat. the KC HiLiTES® Pro6 Light Bar
Вставка
- Опубліковано 4 жов 2024
- Today, we're walking you through installing the KC HiLiTES® Pro6 Light Bar on a Ford Bronco. It's easy for both hardtops and softtops.
In this video, Taylor from KC® demonstrates how to mount the Pro6 Light Bar onto your Bronco, utilizing the factory mounting points for a seamless fit. With clear steps on removing panels, securing brackets, and wiring, you'll have your rig ready for nighttime adventures in no time.
Learn More About the KC Pro 6 Light Bar for Bronco here:
www.kchilites....
Want to Bump It Up One More Notch. Learn more about the Bronco Titan Light Bar Here:
www.kchilites....
See Also:
Installing the KC Ford Bronco Fog Pocket Kit!
(Link: • How to Install Fog Lig... )
How to Install a LED Light Bar on Your Ford Bronco's Front Bumper
(Link: • How to Install a LED L... )
How to Install a Roof LED Light Bar on a Ford Bronco!
(Link: • How to Install a Roof ... )
How to Install Ditch Lights on a Ford Bronco!
(Link: • How to Wire Lights Bar... )
How to wire off road lights using Ford's Upfitter Switch system!
(Link: • How to Wire Lights Bar... )
Click subscribe for some of the best off-roading content on the web, including gear reviews, installs, rig walkthroughs, and events.
Well, i learnt the hard way. You need to curve the light bar, or it will not fit in the straight position. In the process, i ended up scratching the pillar in the center, trying to fit it in the straight configuration as it came in the box. So curve it first then install them.
Thanks for the 21-22 Bronco Pro6 specific install info. One thing that would of been helpful is to mention that the light bar curve/adjustment will be needed so the wires do not pinch or hit the roof and will mount properly on the brackets. This would of saved 30 minutes of time and frustration.
How much height(how much higher the roof) does the add to Bronco?
What would be the correct overcurrent protection for these? I see that the upfitter aux switch 1 is 25 amps.
Wow so you ran the wire up the windshield when there is a wire to one of the auxiliary switches on the left hand side of the windshield already there
Dang those things are nice👍🏼 been looking for some for my 2012 F150. Just a little out of my range right now. Have to probably replace my engine. I will be getting these soon as I'm back up and running again. Love yalls channel and yalls accessories 🤘🏼 I'll post a video to my UA-cam channel once I get them.🤘🏼
Can this light bar be mounted with a roof rack in place? I have a TrailRax tremor rack
These look great! How high do these sit above the roofline? Trying to see if I can still fit in my garage with the extra height.
That’s what I wanna know, too.
@@kchilites thank you!
@@kchilites all good. I had them installed. They are awesome!
@@kchilites Jacob, any update on this? Looking for how far above the Bronco's hard top roof these lights extend.
@@kchilites thank you sir!!
What size lightbar is that
Haha how bout how to wire it up to switched etc??
can these lights get wet during car wash?
Hi, where do I get the key for the locking bolts please. I ordered my lights and locking bolts already but don’t have the key… thank you!
@@kchilites thank you! They sent it over right away.
@@kchilites thank you! They sent it over right away.
Do you sell the wire hider? for the windshield?
There should be an area along the edge of the windshield so you can run the wire along side it and into the engine area.
@@Rakkasan3187101 they do have a wire hider. I installed the light a year ago.
👌👌👌
At 0:56 seconds, let me stop you right there!
Why didn’t you take a couple of seconds to do a close up of the what should of been the most important part of the whole video?
How long you’ve been doing videos of any kind, let alone YT videos?
I had a really positive comment for this process but it just burned me up that you could not focus on the most important aspect of video, to show viewers where and how these lights were to be mounted.