Episode 22. We finish installing the EFI on our 420 cc Predator . .. and it RUNS !
Вставка
- Опубліковано 26 сер 2024
- Episode 22. Jimbo finishes installing the cheapest EFI kit on EBAY on the 420 cc Predator Hemi engine. What are the chances it will start? Watch and find out.
Check out Episode 19 for more information on the EFI kit
Check out Episode 21 for more information on the EFI kit
Episode 19. • Episode 19. We bench t...
Episode 21. • Episode 21. We begin t...
North sensing crank position sensor: www.ecotrons.c...
EFI kit
EBAY www.ebay.com/i...
Aliexpress www.aliexpress...
Want to see more of our lawnmower powered car?
Check out our other Honda insight videos....
Episode 1. • Episode 1. We put a $...
Episode 2. • Episode 2. $99 Pred...
Episode 3 • Episode 3. We build a...
Episode 4 • Episode 4. We put a s...
Episode 5 • Episode 5. $99 lawnmo...
Episode 6 • Episode 6. MPG on our...
Episode 7 • Episode 7. We get th...
Episode 8 • Episode 8. We take a c...
Episode 9. • Episode 9. Honda insig...
Episode 10. • Episode 10. We do so...
Episode 11. • Episode 11. We begin t...
Episode 12. • Episode 12. We put a ...
Episode 13.?????????????????????????????
Episode 14. • Episode 14. 420 Hemi ...
Episode 15. • Episode 15. We finish ...
Episode 16. • Episode 16. We road te...
Episode 17. • Episode 17. We find t...
Episode 18. • Episode 18. We unbox...
Episode 19. • Episode 19. We bench t...
Episode 20. • Episode 20. We make s...
Episode 21.5 • Episode 21 and a half....
"The Governor is no longer functional." Us Illinois folks relate to that deeply.
As a young guy, I did not vote for him. (Not like rauner was much better.) Also, whitmer is just as bad or worse.
@@josephrupsis4623 pretty much every Governor we've had in my 53 years has been dysfunctional. Most of them have gone to prison. Edgar wasn't too bad. Pritzker is a little better than our most recent run of governors, but that is not saying much.
@@markcrites7060 Rauner didn't really do anything- he wanted a balanced budget (which meant we didn't have a budget) Pritzker just wants to tax everything into oblivion rather than figuring out how to cut spending and promoting growth. But hey, madigan said he was gonna resign so things might be *slightly* better.
@@josephrupsis4623 Rauner did more to damage the State of Illinois' finances than any other governor in my lifetime.
Same here in Michigan
This is easily my favorite project I'm following on the UA-cams right now.
Same.
Same ^^
I would have to concur with all of ya lol
Yep, project Binky was the previous leader in the clubhouse.
@@counterfit79 I could get lost for hours watching that too haha, the little tiny bits that they spend so much attention to detail on are incredible.
This show is genuinely worthy of being on tv
I bet this thing goes over 100 mph before the series ends
Damn these episodes fly by quick. Felt like a couple of minutes passed when the episode was ending. The headlight fluid made me laugh.
Last time I was this fast, the honda still got the original engine
@Case-Hard Nails m8 u spelled got wrong
Damn, that’s some fine headlight fluid you’ve got there! My fav brand!
"Bring the thunder"! Couple seconds later: "Now help me understand that noise"
That would have been EPIC!...
I love the garden gnome/gremlin hanging around the shop! I hope this build lives up to your dreams!!!!!!
A Vice Grip Garage reference AND a Star Trek reference in the same video? Made this motorhead / Star Trek nerd happy.
I bet the judges at a LeMons race would love this car
I'd like to see you use an aftermarket speedometer gauge, an arduino and a sensor to wire up a speedometer. That would be a fun project.
I can’t wait for when y’all inevitably do a predator 670cc engine, that will be amazing
Its only the headgaskets that are made of velcro...
Welcome to episode 35. Today we'll be installing a DIY DI-EFI into our BIG BLOCK!
More like Di on a 670
That would be badass but really hard to design
Yay for projects coming together. Can't wait for the EFI shakedown!
Checking in everyday hoping for an update! Such a cool build
Next video in a few days!
These videos give off a strong How it’s made vibe for some reason
CONGRATULATIONS JIMBO 106K SUBSCRIBERS!!! we all love the content
and fun with ROBOT CANTINA. Let's keep the numbers rolling on up👍👍!
Ah yes, the damn gnome is back....though he did not insult anyone or run off with anything.
I see you had the all important headlight fluid to make sure you can see during the day time with the lights.
CONGRATULATIONS JIMBO 106K SUBSCRIBERS!!! we all love the content
and fun with ROBOT CANTINA. Let's keep the numbers rolling on up👍👍!
Hey Jimbo,
Don't forget about the decompressor when tuning the startup on the ECU!
Love this project.
CONGRATULATIONS JIMBO 106K SUBSCRIBERS!!! we all love the content
and fun with ROBOT CANTINA. Let's keep the numbers rolling on up👍👍!
Scotch 33 performed very well in the project farm test, not sure why you had a disclaimer
In case someone tells him he's using the wrong product, lol. There's always that one person on just about every video that tells the video creators how badly they're doing.
@@george8873 if someone says that then just call them stupid, pretty simple and entertaining
EXACTLY!
@@robotcantina8957 Does anyone ever mod these gen 1 insights by keeping the engine & parallel electric motor but adding a charger and lithium battery bank so the electric motor can be used more often?
@@michaelbrinks8089 The electric motor on these cars is built into the engine flywheel.... so when the electric motor is spinning, it also turns the engine. Not very efficient as pure electric.
I see your Aspire ONE's battery is holding up just as well as mine...
Gotta love the subtle "headlight fluid" bottle
I love to see people understand a subject matter that they start to mess around for the sake of it.
I look forward to the next episode of this series more than any television show
My New Favorite "smart guy " channel.
Most important part is ensuring you have enough headlight fluid on hand!
You should take this to Bowling Green KY for LS Fest. That would be a hoot.
NOOO! This episode can't be over already!
I just came upon this series and oddly enough it only recently showed up in a browser search. Excellent information.
Glad you got a quart of headlight fluid. They looked low.
The pandemic panic-buying leaves the shelves bare
Where did you find the headlight fluid? My gf is almost convinced it doesn't exist
Amazon..
I only get quality ChrisFix headlight fluid.
@@CardboardSliver CONGRATULATIONS JIMBO 106K SUBSCRIBERS!!! we all love the content
and fun with ROBOT CANTINA. Let's keep the numbers rolling on up👍👍!
That headlight fluid tho 😅😂 16:50
Thanks for the mind bending conversion of 3 Bar to 300 KPa. Love your videos, can't wait for the tuning video!
EFI:☑️
Turbski:❓
soon
@@robotcantina8957 CONGRATULATIONS JIMBO 106K SUBSCRIBERS!!! we all love the content
and fun with ROBOT CANTINA. Let's keep the numbers rolling on up👍👍!
That velcro comment had me rolling lmao, too true 😂
Great to see you've got your headlight fluid!!!!!!
Sweet new racing switch Jimbo! Loving your humor! Keep it up!
Love this project,maybe you should try a wider drive belt.
I see it's a bit narrow
ive still got my dads 36 year old honda lawn mower, still starts no problem
Pimp up that lawn mower.
It’s always a good day when there’s a new big block Honda video out.
"lightweight carbon fiber sticker"...had me belly laughing.
It adds 10 horsepower for sure
Love that shoutout to Willison Audio Labs!
CONGRATULATIONS JIMBO 106K SUBSCRIBERS!!! we all love the content
and fun with ROBOT CANTINA. Let's keep the numbers rolling on up👍👍!
Those are some well placed ad breaks.
Well. You got me to buy a project car. Gonna do something similar, only I'll be focusing purely on as high of mpg as possible! Can't wait to see this race car go!
Put out videos as good at this guy's while you're doing it... and you'll just be "alex". :-D
Roll it out on the road Jimbo! I like your sense of humor!
I know fuel economy isn't important in this build, but I find it the most interesting. I really want to see the difference the EFI can make
Should be interesting. I can already tell the EFI makes the engine run better.
I wasn't expecting a Star Trek reference followed immediately by a Monty Python reference.
Funny holding the Tricorder backwords.
If it's worth doing, its worth doing right. I love the long road with some shop antics of this channel!
Just a note for you is that tires have the highest rolling resistance when new, but also the highest grip. They lose about 20% of their grip over their lifetime, and rolling resistance gets lower as well, so if your fuel consumption is the same then that is perfectly fine, it would probably have worsened with a normal set of new tires.
3:44 williston audio labs
When I heard the engine turn over I let out a "Yeah boiii!"
You Big Dummy!
Glad you're keeping on top of headlight fluid checks
We should add pneumatic valves to the todo list. There is a guy on UA-cam who designed his own it’s pretty amazing
Is this engine 1 cylinder? How's the timing done for the moment?
Well it's...making noises...good ones..
Glad to see it progressing.
I suspect that NASA would need a similar car for Mars.
What do you have in mind.😁😉👍Excellent.
Love the (not so) subtle humour 😆 keep the videos coming...
You said who uses BAR. Well the diving community uses that outside of USA. Anyway I'm still subscribed and still watching.
One of the most entertaining YT-channels around...! Thank you, for both interesting and humorous content.
Can't wait for the TURBO!!!!! chapters.... ;-)
Baaaarrrrpppp, fisssss and psscht..... Holy heck...
Wow sounds more quiet and smooth with efi
I have no idea what you were talking about in this episode but it was really interesting 🤔 I was just waiting for you to drag race a Smart ForTwo Car!
Well, you made me build my own out of a toyota Camry. It drove 3 miles and the transmission went out. It had no oil in it when I got it and still quit even though I filled her up. I believe the drive chain broke. A 16hp engine broke a 125hp transmission.
Loving the vintage 2007 Acer Aspire One netbook
I see a million subs in your future at this rate!
Bruh, imagine pulling up to a random Oil Changers in this thing.
If I was rich, this is the channel I'd support unwaveringly. It's pure brains
The host is obviously highly intelligent, and gifted. Also mechanically inclined, resourceful, skilled and funny!
@@jeffcard3623 CONGRATULATIONS JIMBO 106K SUBSCRIBERS!!! we all love the content
and fun with ROBOT CANTINA. Let's keep the numbers rolling on up👍👍!
Always look forward to seeing your chanel pop up!
Cool ... she runs ... Look ⏩ to the road testing ... and computer setting the best tune ... Loved the close of the shop bench too, spotted the headlight fluid, 😂 LOL. Is the nome your night security detail ... guarding all this high tech design work under the hood ... LOL 🤣.
09:27 I know they use Bar in Russia. If you've ever seen the Garage54 channel, when they check pressures they measure in Bars. Anyways, once again another awesome video!! This is definitely one of my top favorite projects to keep up with! 😎
I think 11:40 may have been my favourite thing to happen on UA-cam this week.
RC doing Bring The THUNDER ⚡. 😁.... & a flipping ⛽ cap
@Robot Cantina I think you should use bigger chain when hoisting that engine in there!
Awesome stuff. I want to do this on my old motorcycle at some point. Can't wait for the tuning part
Casio crew! I love my mq-24. What you're doing is really awesome, it's nice seeing good progress being made. I can't wait to see this thing tuned and tearing up the hillbilly proving grounds.
Glad to be here since the start of this. This channel just gets better and better. Can you still do dyno results when you finish this phase with the tuning? Would be cool to see.
No pressure.....but I am expecting great things in episode 23. 😃
You deserve some patreon, but budget builds are great.
Awww man...da' best. So looking forward to the next vid. Glad that the ghost of Spock made his presence known. Nothing like a tricorder. But Spock does not exist yet..oh yeah...he was teleported into the past. Ok..I'm okay now. You need a Trible as a fuzzy dice mirror thingy.
@Case-Hard Nails Yep!! And it exists now today...truly!!!
Much love for the F-91W!
Very nice! I'm sad it's over so soon. But it was too the point and not filled with bs probably why I like it so much, oh and the puns
Awesome channel, just binge watched it. Make sure the MAP sensor can handle your boost goals. If that EFI kit is built for naturally aspirated setup, the MAP sensor won't work for anything over 1 bar. Goodluck and looking forward to more progress!
The MAP will get changed when we go with forced induction.
3:44 For a second I thought my playlist switched to the Williston Audio Labs channel.
Cool, so glad I found this channel a few months back and watched all the videos so far. Keep them coming your doing a great job
Absolutely stellar content, engineering and exciting learnings, by far one of the best channels on you tube
Thank you
That's a seriously nice watch
I guess us metric crowd uses bar still. It's our one guilty unit pleasure.
Though granted we don't wanna go too fast'n'loose with our units so it's a neat 100 kPa.
Careful. I hear everyone with a F-91 casio winds up on _"The list"_
Nice car, but its practicality is limited without heat. It would be interesting to see if you could create some simple ducting to direct some of the hot air from the engine into the cabin so that the windshield could be demisted in cold weather.
Hey Jimbo, 2:00 a regular gy6 scooter rectifier-regulator will get the job done. Plus they're cheap.
“At some point our engine will be getting forced induction”. Lol
You could spray the exposed terminals with conformal coating or anti corrosion spray. Loving the build! Keep up the good work dude!
I used a neodymium magnet to attach a piece of flex tubing to the exhaust on my portable generator. It lost it's magnetism in minutes and it never came back. It looks exactly like the one you have. I hope you have better luck. I replaced it with two larger ferrite magnets. They didn't lose their magnetism, but the one attaching the exhaust pipe cracked due to heat. For now I just wrapped them with aluminum foil tape to hold them together.
This keeps getting better and better!
Happy to be back Mr robot cantina
This is lots of fun. I enjoy the ingenious creativity.
Beautiful! Absolutely love the project and the humor! Less than 5k when I subbed and look at you go! Great content jimbo!
effin genius love this series
Don't forget you can get a predator 212 up 2 22 HP with a stage 4 or 5 kit so there it a lot of room to go yet on this 420 predator.
The metric crowd thanks you!
You mean the rest of the world!
Scotch 33 also makes the best shop bandaid. Cheap electrical tape just doesn't cut the muster.
This Honda needs a bonnet scope to make it even more race car like!
11:17 OMG! Someone still uses one of those underpowered NetBooks!? I'm... impressed! I have one of those in the closet somewhere.
Great computers for tuning
@@robotcantina8957 CONGRATULATIONS JIMBO 106K SUBSCRIBERS!!! we all love the content
and fun with ROBOT CANTINA. Let's keep the numbers rolling on up👍👍!