How to do Slab Reinforcement Detailing Using Autodesk Revit According to BS and Eurocodes (PART 1)

[@kanejaionmangoba5388]

Thank God tutorials like this exist!🙌 Huge thanks to this Video.

[@structuralengineeringtutor574]

Thank God you appreciate the videos. Thank you very much. I will provide more tutorials

[@MJ-ru3dp]

Thank you so much for sharing your knowledge. I truely appreciate it. All the way from Jamaica. Blessings.

[@structuralengineeringtutor574]

I appreciate you bro. Thanks

[@darirusanferaa7647]

Thank you for sharing your knowledge and experience you have gained a new subscriber. Please continue to make a videos like this.

[@logoravaezekia1713]

I've been using autocad for long time now. This software is wonderful. Thanks for sharing.

[@structuralengineeringtutor574]

Thank you for watching. 🙏🙏🙏

[@zayaanhussaini6174]

Thanks for this video, it was very helpful to me as I was facing problem to segregate the Top & Bottom bars. 5 star from me

[@structuralengineeringtutor574]

Thanks, i really appreciate you

[@Blesskudz]

You're the boss. Where have you been all along. You've gained a new subscriber!

[@structuralengineeringtutor574]

Thank you for your kind words. And thanks for subscribing

[@kamranrehman4658]

❤❤❤❤very good information i boost my exp see this very good lacture ❤❤❤thank u sir

[@rocky8004]

Awesome teaching Sir Ji

[@structuralengineeringtutor574]

Thank you. I appreciate it

[@srdjansimanic2404]

comment for the algo, great stuff, keep going!

[@structuralengineeringtutor574]

Thanks brother

[@md.habiburrahman-xg9sd]

Hello, you need to make some correction. long direction bar will be in bottom. Otherwise, your tutorial is very good.

[@jackson77ish]

Thank you, you helped me alot! Cheers!

[@SirKombabomba]

Awesome Skills-Thanx

[@structuralengineeringtutor574]

Thank you Sir

[@SirKombabomba]

@@structuralengineeringtutor574 Luv Your WORK on REVIT DESIGN

[@megadesignarch4023]

Wonderful inspiring

[@structuralengineeringtutor574]

Thank you. You inspire more

[@fokall1447]

Good afternoon, your video is enlightening, can you please make a video or explain it here how you made your custom call out tag to make it look like the one on cad-rc. Thanks..

[@structuralengineeringtutor574]

Yes, with pleasure Sir

[@smishize]

Thank you bro.

[@prabhatsingh1509]

brilliant

[@structuralengineeringtutor574]

Thanks

[@SchwanaCARDHUT]

Bravo 👏 👏

[@structuralengineeringtutor574]

Thank you my friend

[@SchwanaCARDHUT]

U are greatest

[@mojahedsabbah26]

Thanks for the great work!!
Is there any way to demonstrate the hooks of bars in the top view? That is, to show the end bars as - L- bars looking in the plan of the slab??

[@structuralengineeringtutor574]

Yes you can. But i don't like that. Because it sometimes cause confusion especially when there are alot of things in the drawing

[@rodneymoyo13]

Where have you been sir, this is very great

[@structuralengineeringtutor574]

I have been around my friend. Thank you for your kind words.

[@dancancrinskid2989]

Would you mind showing how you set the rebar type to H-type from the default ASTM rebars i.e 10m, 13M etc

[@fvzbilge]

You apply different methods for your slab reinforcement divisions.right?

[@dancancrinskid2989]

Would you mind showing how you set the rebar type to H-type from the default ASTM rebars i.e 10m, 13M etc to H12 etc etc?

[@niinuetey9878]

GUYS, USE PROTA STRUCTURE. YOU COULD DO THIS IN UNDER 30 SECONDS

[@structuralengineeringtutor574]

I believe you can. But will then require alot of corrections

[@sureshcivil8627]

Nice video can u make a video on Drop panel of Flat slab & raft with opening - It helps us Lot

[@structuralengineeringtutor574]

Thank you my friend. Will do that Inshallah

[@sureshcivil8627]

Please I have also raft.. Can u please do.. It saves me..
Respect from dubai

[@justscribeyourthought9855]

thanks

[@structuralengineeringtutor574]

Mostly welcome my friend.

[@LIONHEART66666]

hello sir, thank you for sharing this tutorial. Can you also share the family that you are using ? thank you once more

[@structuralengineeringtutor574]

You are mostly welcome my friend. I am not using any family however. But i will be happy to share the revit file should you need it

[@ribelashx9640]

CAN YOU MAKE ONE FOR STAIRS

[@structuralengineeringtutor574]

Yes , will surely do. Stand by for that

[@justscribeyourthought9855]

hey you didn't show the crank and lap length i think thats important

[@structuralengineeringtutor574]

You are right, its important and i didn't show it because in my country, its not necessary to show. They say it's a site Engineers job to determine that in regards to the length of the bars he is receiving from the suppliers. But all in all, i agree its important.

[@justscribeyourthought9855]

@@structuralengineeringtutor574 well its alright!! do you have any video for rbar quantity schedules?

[@tagaparalaya]

what if the lap is cranked? how do you show a bar on the plan that it is a cranked bar?

[@structuralengineeringtutor574]

If the lap is cranked, then you might have to show the horizontal section of the slab. However, in BS 8110, there is no need for cranked bars. I believe this concept is mainly in Indian Code

[@zolgerelt]

how did u make ur section cut to look like that? is there a tutorial for that? response would be highly appreciated

[@structuralengineeringtutor574]

Hello Zolo, there is nothing special about that section cut. Just select a section and cut it where you want. I might be wrong but i believe i didn't skip any step to get exactly what i did.
Thank you for watching my video.

[@ceepatekconsult]

How do I install BIM software

[@structuralengineeringtutor574]

Which BIM software?

[@ceepatekconsult]

@@structuralengineeringtutor574 I thought what you used was BIM

[@danieldonkoh1337]

Please ... .how can I contact you?

[@structuralengineeringtutor574]

My email: [e-mail]

[@JodelVergara]

Williejohnjohndcecan