I have the same problem the wheel staying hard to the left & when I turn the steering on the receiver the wheel turns the opposite way I had the X10FG installed at the time. Mine came with both the X10FG & the X6DCG & the X6DCG receiver is for lights. Can I use it as the main receiver instead of the X10FG even though it for lights
I'm away at the moment, but I'll get back to you on this. I don't remember how to do it off the top of my head, but I don't think it is too difficult. Pretty sure it was straightforward as I set them up differently for each model I added.
@@vrnoobie3804 Any receiver that has a spare channel or port can power lights. There are plenty of spare channels on the X10FG that you could use to power lights.
Hello mate, do you mean make the steering speed slower? I've not tried to do that on mine. But in the past on other transmitters I've found if you turn down the dual rate on the steering, this slows down the steering action but it also means that the steering will turn less in either direction.
Usually the exponential settings that numbs the steering down,ive not used this controller yet,just ordered one but ive used the exponential on my old controllers to smooth out or numb the steering
I don't own any drift cars and it's not something I have any experience in. All I can say is the response rate is excellent and so is the range. Feels a quality transmitter despite the low cost.
@@Arrudajmr Understood. Yes you will. I did that on my Rlaarlo 917. Bound the stock receiver to the DDF-350 and once I had done so, the stock transmitter no longer worked.
I have the same problem the wheel staying hard to the left & when I turn the steering on the receiver the wheel turns the opposite way I had the X10FG installed at the time. Mine came with both the X10FG & the X6DCG & the X6DCG receiver is for lights. Can I use it as the main receiver instead of the X10FG even though it for lights
You can use any DumboRC receiver with this transmitter. I have mine binded to several different DumboRC receivers.
How should I configure custom mix to handle 4 steering wheels?
nice, but i cant setup end points and triming... help
I'm away at the moment, but I'll get back to you on this. I don't remember how to do it off the top of my head, but I don't think it is too difficult. Pretty sure it was straightforward as I set them up differently for each model I added.
@@rcfools ok, I know, it's actually quite simple
Good stuff RC!!
Thank you. I really like this transmitter.
Hey, i was wandering if a DUMBORC X10FG receiver will accept light like a DUMBORC X6FG ?
Not sure what you mean by accept light?
@@rcfools i found that this receiver X6DCG from dumborc i can put directly light on it , thats why
@@vrnoobie3804 I have no idea what you are trying to say? What does directly light mean?
@@rcfools on the x6dcg receiver they have put 6 channels on the right and on the left they put light ports to connet lights
@@vrnoobie3804 Any receiver that has a spare channel or port can power lights. There are plenty of spare channels on the X10FG that you could use to power lights.
Hey up pal. How do I slow the steering down the remote tried every setting any help will be much appreciated
Hello mate, do you mean make the steering speed slower? I've not tried to do that on mine. But in the past on other transmitters I've found if you turn down the dual rate on the steering, this slows down the steering action but it also means that the steering will turn less in either direction.
@@rcfools yea pal that’s what I’m trying to find can’t seem to find it any where
Usually the exponential settings that numbs the steering down,ive not used this controller yet,just ordered one but ive used the exponential on my old controllers to smooth out or numb the steering
Wht do you think for rc drift ? Its good or enough ? Thx for the answer sir .
I don't own any drift cars and it's not something I have any experience in. All I can say is the response rate is excellent and so is the range. Feels a quality transmitter despite the low cost.
Yes... It has all necessary menus and tweaks you will need. It's simply superb.
Hi there, can i bind 2 transmitters on the same receiver at the same time?
I'm not sure? It is not something I have ever tried to do.
@@rcfools I have the X6FG and the X10F(G) receivers and i want to bind the X6FG on the DDF-350, without loosing the other transmitter binding
@@Arrudajmr You can. Just save it in your model memory on the DDF-350. I have several cars on mine.
@@rcfools Thanks, i mean it on my other transmitter, the X6PM-350, if i bind the DDF-350, i loose the X6PM-350 binding on the receiver.
@@Arrudajmr Understood. Yes you will. I did that on my Rlaarlo 917. Bound the stock receiver to the DDF-350 and once I had done so, the stock transmitter no longer worked.
Awesome vid subbed ya just did a unboxing vid on mine I love it!
Thanks fella. Liked and subscribed to you.
Did the same with me🤪