Dumborc 6 channel receiver with light control function
Вставка
- Опубліковано 18 жов 2024
- This is the receiver from dumborc. It has 2 version, one with gyro and the other without gyro function. It is same as the earlier receiver but it has come with extra function to control the lights (1&2 for signal, 3rd for brake, 4th for atmosphere light, 5th for reverse light and 6th for headlight). Besides, it works with other transmitter as well. Tq
Outstanding Jeffrey! This was the best video tutorial that I have seen for connecting everything up. Excellent job!
Tqvm.
Gracias estaba confundido y no podía configurarlo , mi hijo quedó maravillado, en mi coche yo no quería luces pero ahora creo que comprare solo el receptor y haré la modificación. Muchas gracias Excelente explicación, lo siento por no escribir en inglés. Saludos desde Ecuador
Hola yo tengo el mismo control pero las luces no me funciona como el video necesito comparar algo más para la luces o solo conecto los cables de las luces en algún canal?
@@javit9361 tienes el mismo receptor?
Es diferente es el DUMBORG X6FG
@@javit9361 para conectar las luces debes tener el mismo receptor y comprar las luces en el mismo kit ya que ese receptor viene.con los pines para colocar las luces
@@javit9361 puedes conectar en cualquier canal vacío que tengas, solo checa las polaridades, aún que no debería pasar nada pero por si acaso mejor conectar bien desde el principio, la única diferencia con el del vídeo, es que no te va a hacer las funciones, simplemente siempre estarán encendidas desde que enciendas el rc hasta que lo apagues, pero si se puede no pasa nada
This was very helpful 👍 thanks for your upload 👍🙏🐈
U r welcome 🤗
Super useful. Thanks so much.
Very helpful video thank you
You are welcome
Thank for sharing my friend👍👍🥰
Thanks a lot, this is great
You are welcome
Excellent video. Thanks soo much. Perfect understandable English, speak slow to understand. I would have two questions if I don't disturb you. 1st is if do you know the differences between DumboRc rx code DC vs code YC? 2nd question is what would you choose and why between DumboRC or TurboRacing? Thanks so much!
Tqvm, you are welcome to ask, it is okay for me. 1st DC rx s the receiver come with extra connections for LED lights (the one in this video), so u can control the lights by directly plugged into the receiver light connection pins. The YC is more for gas vehicles with failed safe setting features, I’m getting one of this and will be doing another video for it. I choose dumborc for my crawler as it has sufficient control features for me now, but I may change to other transmitter in future if I need more control and setting function as it has only limited setting features. For turbo racing, they have updated their 3rd channel control mode, it’s hand wheel spring is a bit too soft for me (this is just my personal preference), other than that it is a very nice transmitter too. In term of value, I will choose dumborc over turboracing. But I have contacted the turboracing customer support before regarding the third channel, their service is very good.
Hi there, thanks a lot for this video! May I ask where do I get the exact led light set? I’m looking for all those for my Yikong yk4104 1/10 rc scale crawler.
Thanks in advance.
This is great thank you
Tqvm
one drawbacks after i get it all set up is the dimming brake light only takes effect on almost full throttle, same for the reverse light, it wont light up on slow throttle. Is there any ways to adjust them?
What’s your input voltage and current?
@@jeffreytfl5832 im using hobbywing 1060 esc and 2s lion 7.4v battery
after connecting these, can the 5 and 6 channel be used on another light bar?
Wow, what a game changer! With this it will be less module, less spaces, easy to tidy up cables from 1 sources control box.
When will be marketed? Kinda hard to find in local e-commerce
I bought it directly from the manufacturer but I'm not sure whether it is available in other countries or not.
Very Nice Video!!!
Tqvm
Hi Jeffrey
Does the X6DCG receiver have failsafe? I tried to program the failsafe like your other video, but it didn't work.
Hey great video I just have one q. I plan on using this on a boat so I won't need gyro function but I would like to have channels 5 and 6 being proportional to use for working anchor etc and yes the extra lighting options could be handing. So how can I make sure I get that receiver as there seems to be many options thanks
So long you get the transmitter with turning knob for channel 5 and 6, it’ll have proportional control to these 2 channels
Thanks and it arrived Friday. Only thing I will say is that was a month faster than they figured lol so I still don't have r.s.c I need to test everything yet lol
Thank you
Hi. What transmitter are you using? What brand and model of transmitter does this receiver work with?
I used the turbo racing (hobby porter) 7ch channel transmitter for demo, I saw someone using the flysky transmitter and receiver to work with this receiver as well in other video.
thanx
i have this receiver on rgt 136161 and now finnaly i know how to turn on those blue led angel eyes it has
👍
Great video buddy I was just curious if I could install this on the Stocks server Eachine eat14?
you will need to replace the steering servo from 5 wire servo to 3 wire servo.
Thanks for the reply but I am pretty sure the Eachine eat14 comes with a three wire
@@bonbonesrc3968 you are welcome, it's good to know that it comes with 3 wire servo. 👍
Does your light (leds) kit includes any resistors? I performed some measurement on mine X6DCG and it seems lights outputs are 6V and does not have any current limiting resistors, so if you just connect leds - they will burn. Now I'm curios how this led kits are made...
I have tried to plug the Led from an old PC directly to the receiver light pin without any issue
@@jeffreytfl5832 I hope you know how leds work, so it can’t be true :) If it was white led - they might survive for some time current above 30mA, but just for coincidence
For those who read this: kit includes current limiting resistors, they are soldered on wires
@@alexey_sychev great and thanks for your info
I need change leds 5mm to a 3mm steering. And Back lights. How calculate limiting resistor?
Could you make a how to calibrate video?
It is just like the normal dumborc receiver with extra light pin for light connection. You may check out my another video on how to do the setting and calibration.
Hi Jeffrey,
I want to ask :
1. Is it just a series of LEDs strung together and directly connected to the receiver without resistors or modules?
2. what is the output voltage from each channel port?
3. How many volts of battery do you plug into the receiver?
Sorry if you ask too many thanks
1) yes
2) depend on your input voltage
3) 2s Lipo
2 - measured on mine - 6v. And seems like there is no current limit resistors, so if one of leds die - the second probably burn right after
@@alexey_sychev I have an Yikong 4102 (Absima Sherpa) which is using the same receiver, one of the signal led pin broken near the bulk but doesn’t affect other lights function
very good...
Is there a way to use the FL Port continuously?
Will it work with dumborc with gyro?my model is X6FG
Yes
Will this be the same for MN86 light control?
What is the wire gauge used by dumborc for led lights?
Hi i have a question what chanel do put the battery
Do you mean the battery connection to the receiver? Any of the receiver channel can connect with the battery, so long you have the correct voltage
Hi Jeff. Quick question. I ordered the same receiver like yours but it doesn’t come with lights. What I did is ordered a set of 3mm LED lights on amazon. The LED is wired but it didn’t come with connector. I need to buy a connector but I don’t know what it’s called?
Sorry for the late reply, those are 2 pin jst
Do you also get the lights if you only buy the receiver?
You can opt for receiver only, the lights are add on items
I have thisnis there a button on the radio u can turn them off are they always on
question, is the 3rd channel button need to be programmed? I have placed an on/off switch hooked up to my lights however the button does not turn it on? If I place the lights on the receiver I have no problem. I have two on/off cables and tried both and neither one of them worked my lights?
It is plug and play, and you can choose the control mode by pressing twice to the tiny button on the top. I dun use any on off switch and just plug the led directly to the receiver.
@@jeffreytfl5832 what tiny button? are you referring to the controller?
@@edwinnegron7761 the receiver has two button, one at the bottom (same as the earlier 6channel receiver), and another one is on the top for light control mode function (indicated by purple light)
@@jeffreytfl5832 Hi Jeffrey, I plugged my light directly into Ch3 of the receiver but pressing Ch3 button on the TX does not turn off the light. Light is constantly on. Am I doing something wrong? Many Thx
@@phulesickmate I have the same issue, two controllers doing the same thing!!!!! What a bummer!!!!!
What type of connector should be used for the light controller? Servo connectors are too wide.
they called Dupont
I allready asked a question the other video about the setup of the Dumborg and this is my second : why does all this do not work with my transmitter (X6)/reciever (X6DC)? I think I do something (very) wrong but the servo on ch3 is not working (better : gives a interference with the steering servo) and when I put the JST plug in ch4 (atmospheric/fog lights) it does nothing. It's making me crazy.......
Since your both receivers are having the same problem, it is likely caused by the transmitter. Maybe you try to re bind after reset
The lights setting button is on the other side (opposite of the bind button), you may try to change the setting mode. You may also check my another video for changing the light control mode for YK-4102.
Cool 🔥👍💯💪
My headlights dont turn on, and only right blinker works, left does nothing. but 4 way flashing (ch3) all 4 signal lights blink....... brakes, rev, safety/emerg lights work. along with 4 ways, no left turn or headlights. i got headlights by just plugging in to ch6 power without the signal wire. but i have no left turn... what could be wrong? not much english documentation on dumborc anywhere
hello! please tell me what is the difference between receivers (X6DC) and .X6DC(G) thanks in advance
G model come with gyro function
👍👍👍
Ciao complimenti per il tuo video, desideravo sapere se è possibile oltre le luci in dotazione nel kit aggiungere e collegare in qualche modo una barra led quelle che vanno nel tetto , un'altra domanda posso fare funzionare il tutto a 7.4 volt perchè io uso l'uscita del mio esc a 7.4 volt, grazie
Hi again i have a problem i don't know how to reset the resiver because it's not working properly the lights and gyro ... i hope you can help me
Hi boss, I bought the receiver without light . Is the old transmitter compatible with the light receiver?
Yes
Does it comes with the light?
It has few options, you can op for receiver only or with lights or with extension Y wire for jst connector
Hello, I'm trying to get some help.
I bought a dumbo X6F with lights; it doesn't seem to have a blue LED, and the only lights that work are the indicators. I can also turn the gyro on and off, and that's it.
Can someone shed some light on this?
Excelente contenido, donde puedo co seguir ese kid de luces? Gracias
hello bro..this reciever can be use with 11.1V lipo?
3.3v to 10v
@@jeffreytfl5832 if i use 11.1V on my yikong yk4102 what is the impact bro?is it may damage dumbo rc reciever?.what battery that you use?..
@@zuljiannaijluz3631 I used 2s lipo only, the esc is same as the Hobbywing 60a brushed esc, so spec should be the same
nice sharing.
Tqvm
I have xdcg version. But i noticed that may turn light (right) is not working.
Turn light (left) is fine.
I checked the led by swapping it, no problem. But the turn light (right )is not working.
But when I execute the emergency lights (hazard), both light is working.
What could be the problem here?
Thanks!
Sorry for late reply, I’m not sure what caused the issue, but you claimed the replacement from the vendor.
@@jeffreytfl5832 Is this a common issue? I seem to be having a similar problem, however my right turn signal works, and left turn signal does not work. The atmosphere light also does not seem to work (4 quick right turn). I'm currently using a 4 channel dumborc transmitter (ZD Racing). My hazard will also light all 4 corner lights, however when I steer I only get signal on one side (2 lights).
i have the EXACT same issue, one turn signal doesnt work but 4 ways all 4 do work.
@@tonyt1191 i only get one side i believe right signal, left does nothing. 4 ways work though (ch3 button) and i also have no headlights.
Hi guys! I found the solution. It’s not actually a problem. It’s about the settings (steering trim). Dumborc receiver requires a minimum steering end point. If your did not reach that point the signal light won’t work.
Noice
Tqvm
The mode is rumble.. i test all the lights its working but if i connect it again to the resiver its not working properly the mode been rumble
hi Jeff,long time no see ....how are you man?
Thanks and fine. Just busy for my jobs schedule due to the pandemic outbreak.
Can use remote control 4ch?
Yes
Hi.how you turn on the receiver direct from battery?
Just plug in the battery JST connector directly to any one of the channel, but do make sure the polarity and voltage of the battery is correct and suitable for the receiver.
Need more than 50% throttle input to make the brake light work
Where to buy?
I bought it from taobao
none of the turning controls work for my lights, i have the new gen controller, and a x6dc receiver non gyro. only the mode for the channel button lights works.... in ch button control mode though i have no left turn, only right turn signal. 4 ways work though. headlights not on either.
Looks like there are some people have encountered the same problem, I will try to check with the manufacturer
I will try to check with the manufacturer, hope they have the solution.
Hi... I got problem.. I cannot turn off led headlight using ch4 button...its happen after i do calibration..
U meant everything is OK before calibration?
@@jeffreytfl5832 yes... Everything ok before calibration.
@@salamnasher that sound weird, I need to check again
Thank you.. I hope you can help me to solve this problem..
@@salamnasher I will try to look into it
can anyone help me?, why is every left turn the left turn light and reverse light also on?, then if the car is backward then the reverse light and the right turn light are also on?, and when the car moves forward, the left turn light also lights up?
I guess it's in Mixed
Mode.
Where i can this ligjt
I bought it directly from their taobao store
Where id link for buy it please share
I bought it through China taobao website, I think you will see it on other online shopping platforms soon
where is your link ?
i was going to use it .
get a link from bang good (any one can i think ) and you will make $$$$ when someone uses your link and purchases this reciever .
I am going to purchase one and was going to use your link .
thanks for the video .
Sorry for late reply, just noticed I have omitted to answer your question. I bought it through local online shopping platform for the transmitter and the receiver bought from Taobao.
Why my signal is on when reverse?
Did you plug into the correct pin for the signal?
That is gimmick, backward lamp only on when +1/2 throttle, and break light olways on
The rear lamp is always on, the break light is on when abt 1/2 the throttle, so maybe you need to swapped the two light connection
Fortnite
thanks