Pulsar 23 - Patch Break Down
Вставка
- Опубліковано 15 жов 2024
- For those who requested, here's the breakdown of the patch I played in my last video. This is my first time making this kind of video, so there's a high chance that I may have missed some of the points you may have been interested in. Feel free to ask questions; I'll gladly answer them in the comments section.
Here is a link to the performance video:
• Soma Pulsar 23 - Time ...
If you wish to connect with me on different platforms. You'll find more links here:
biglink.to/son...
Thanks for tuning in.
This is great man thanks for doing this!
Thanks Keith!!!
Fantastic content 😍
Thanks! Glad you found it useful
Super helpfull! What mixer are u using?
Currently I’m using A&H GL3300. If you are planning on buy one, I’d recommend looking into Tascam model 12 or 16. It’s got built in audio interface. You can multitrack record and also use the mixer as a DAW controller.
Thanks
Nice job
Thank you!
Thanks a lot! 🙏
May I ask how do you trigger the shaos and the delay with midi without using the midi to cv module?
In this case have chaos going into vca and I’m sending the drum gate #3 cv output on the back of keystep pro to open the vca. I’m using the 3mm to alligator clip converter and that’s all. Another way you could trigger the vca is by using the 4 pins on the right side of pulsar, which have midi learn buttons. Hit the key you want it to learn and then patch that to whatever you want to trigger. If you patch it this way, then you can control the gate level too.
@@SonicJunkie thanks! I didn't think about the cv gate out on the keystep (and didn't listen enough as you mention it)
Thanks in taking the time to explain it so quickly 👌
Thnx❤❤
You are welcome!
Bonjour, je n'ai pas bien compris comment vous séquencer le delay, comment est-il patcher ? merci
The output of the delay is patched to the input of the VCA on the Pulsar 23. The output of the VCA is patched to the input of the mixer. As a CV control, to open the VCA, I’m using one of the drum gate outputs on Keystep Pro. Then, I’m sequencing the pattern on Keystep Pro. Hope this helps. Let me know if you have more questions.
@@SonicJunkie Thank's,
it is strange, I tried but I couldn't sequence the delay, I plugged in like this:
OUT DELAY to VCA IN
VCA IN to The MIXER (Soundcraft)
CV IN of VCA to Gate Out keystep
am I making a mistake somewhere? thanks
@@Mariedu01 VCA output should be going to your soundcraft mixer. Maybe that’s the issue? Also, you want to make sure that your feedback on the delay module is all the way up, so it loops and generates tonal sound.
@@SonicJunkie yes sorry I made a typing error, I did connect the VCA OUT to the mixer (soudcraft), I would try again all in time, I must have made a mistake, thank you again;)
@@Mariedu01 let me know how it goes.