NEVER BUY THIS DeWALT TOOL ACCESSORY
Вставка
- Опубліковано 21 вер 2024
- NEVER BUY THIS DeWALT TOOL ACCESSORY VCG Construction tells you multiple reasons to never buy these DeWalt Tool accessory kits. we also go over better DeWalt Driver bit tool accessory kits that you should be completing your construction projects with. We give the #VeryCoolGang two main Dewalt tool accessory driver bit options but we tell you which driver bit kit is the better #ToolDeal because we know ya'll love a good tool deal. Only if you watch the entire video will you be wise enough to know why you should never buy this #DeWalt tool accessory driver bit kits !
Shop our Affiliate The Home Depot & VCG Construction may earn a commission:
DeWalt MaxFit : homedepot.sjv....
DeWalt MaxImpact : homedepot.sjv....
Get Your VCG Construction Merch here : vcgconstructio...
Very helpful... basically new to the world of power tools etc. your videos have been a big help... I’ve ordered bits already for the “house” drill at the job... but I just ordered The Dewalt dck2991t1 combo kit so I going to get a set of the impact bits as well. Again thanks for the info I will be watching.
Thanks George we appreciate that, and we’re glad the videos are helpful!
It would be real nice if you could add pictures when leaving comments like ummm everywhere with a few exceptions. A way around it is upload a vid to UA-cam my next reply will have the link
This guy is a dip shit.
How can you be new to power tools? Did you just start construction? Or have you always just worked around people that have them but never bothered to try them bcz ur so old fashioned?
Ed Crespo
“New” as in the details regarding them. I had an general knowledge as far as what they are but I didn’t know the nuances for instance “hammer drills, brushless motors etc.” I didn’t know anything about that stuff. I recently got promoted at my day job that requires “handyman” work so I’m making myself more familiar with details about them.
“I don’t have a whole lotta time today in this video” - then the first 10 minutes of the video can be summarized into one sentence: "dont buy bits kits without a clear window. You will never know contents of them by looking at them, and then you will waste your time by opening them one by one to check." Thanks very much VCG! That backs up your opening statement so well. ^o^
"Let me tell ya something"
26:55 and "this video will be brief" :) Still a decent video :)
I agree Leo - "...we're gonna make this one brief - 0:52", could have been summed up with one or two sentences... Even if you didn't want to sum it up like that; at 4:25, he already stated why he wouldn't buy these kit's. And that's the other thing - for the first min. and a half, based on the words he used and the way he presented this, it sounding like he, "was NEVER going to use these kit's EVER again!!" LOL Seriously? Almost 27 min... "for clear lids?" Yeah, no kidding their better, but that's 27 min's I'll never get back again! My impression is Vince likes to ham it up with a lot of fluff and pauses that seemed like he didn't know the end of a few of his thoughts. Good effort Vince, but try to take into consideration that other people's time is valuable to them.
@@TheeSSgtRod haha good on ya my friend, for the detailed analysis !!!
The legend has it he’s still talking about screw bits .. briefly
0:48 in “I don’t have a whole lotta time today in this video”. Christ help us all when he does have the time.
Lol
😂🤣😂🤣😂🤣 Exactly
😂🤣😂🤣😂🤣
😂😂😂😂
is it not the standard to tell everybody your busy?
I’m going to keep it brief.......30 minutes later.😂
What a lovely dumb; ass
Dewalt must be the ones giving buck
Haha, I thought the same thing
Haha 😂
Waffles on worse than the wife
Funny that a “short” video here about a screwdriver bit is 27 minutes...
Love the vids but do wish they were about 75% shorter. I end up rarely watching the whole thing and jumping through a lot missing so much.
THIS Moe_RON is incapable of getting to the point in ANY sort of reasonable manner..
@ 6:00 we learn, “I haven’t used these bits yet...”
Jesus, thought that’s reason we’re here.
Prolly more ‘useful’ FYI after that...IDK. 🤷🏻♂️ 🤷🏾♂️
but at least we know it has a clear lid now.
Chris Jennings
Beat me to it
Love his reviews but he is very long winded and takes the short 27 minutes to say just buy the box in which you can see the bits. Personally I have the yellow box, but I know exactly what's in it without having to use a sharpie. I have the one for bits, and I have a red one for drill bits: color coded: KISS (keep it simple stupid) I've been told. I do have a clear one with all specialty bits including a larger sample of torx bits, including the safety ones. I mean just a T20 and T25 doesn't cut it. There are T10 head screws so now you're phucked without one. Just my 2 cents
I like the yellow boxes. Just write on em or label em. They fit better in a work bag than the big flat boxes and dont break like the cheap plastic flat cases
Color 'em. Don't have to read then it's even faster
0:50 "we're gonna make this one BRIEF"
Me:
Wish I could like this but I don’t wanna ruin the count keep on doin da whammy
The same guys that said you don't need magnetic are the same guys that said you don't need power steering.
Love your delivery
You can buy the box separate. I’ve taken the bits out of my old yellow boxes and put them in the new clear top.
FYI: the yellow boxes make for a good bandaid box. Also good for small sockets that tend to get scattered in your tool box.
I make superkits myself too brother
Time is money but damn if you didn’t procrastinate getting to the point 🤦♂️
All of their videos are this way. 45 seconds of useful information dragged out into a twenty plus minute video to keep their watch time metric up and the ad money rolling in. I despise this tactic. Just give us the damn information and scrap all the useless repetitive stuff. Plus his personality is annoyingly high energy
@@AndrewServin he doesn't have mid rolls so the over 10 minute mark means nothing in terms of ad revenue
Hey the guy makes sense is trying to explain what's out there for homebuilders or DIY people I'm a pro for 30 years I like the videos
More time talking about bits is more money for them
I bought both of those clear kits about 6 months ago. the new way of being able to remove and store bits/drivers was a game changer for me. I hated the old inserts for bits/drivers.
They fit the screws well, but I'm glad they give you a bunch of them because in my experience they don't last long at all.
Yes, I’m one of those that mark the cases on a few sides for easy ID depending on how they are stored. Even on the red Milwaukee cases but I separate the drill and driver bits by type into personal kits of my choosing to ease the process as well. The boys do like the new clear cases also and they mix and match to their own preferences. Though I prefer the Milwaukee style of holding the bits the dewalts can be a bit of a pain. So I cut the top tabs off these so the bits can lay in easier. Hot glue small cheap bar magnets from hobby lobby onto the back side of holders and bits stay in place. As the bits are used up I pick up the particular size bits in their cluster packages as needed when refilling the cases. I’m not an expert but thought I’d share something that works well for me. Stay safe
Good tips Tim we all appreciate!!
should add "(BUY THIS OTHER DeWALT SET INSTEAD)" and maybe less haters will thumbs down lol thumbs up cuz this guy's energy, love, and enthusiasm for tools is contagious
"I dont have a lot of time in this video, Today. We're gonna make this one brief." Takes four minutes to get to the point.
27 minutes to tell us about a see through case
The box I bought, showed what was inside, and it didn't have a clear cover...🤔
I have to tell you that I bought a DeWALT table saw for re-caping post and beam housed and with it's rack and pinion style fence adjustment it is the very best portable table saw I have ever used - ever ! I really appreciate learning more about the Dwalt screw bits and there magnetic partner for the impact drill. Hard to get these in the Philippines but I am back in Canada twice a year and I will be traveling with these kits. Thanks ...
This video has motivated me to do a pencil sharpening video with this kind of motivation and excitement
I have become a huge fan here lately. I recently have gotten a total knee replacement. I’ve been on the couch watching all your videos I have been learning so much. Thank you for all these videos
Get well soon !
No DeWalt's #2 bits are literally the best. You'd never know it until you try it, but it's like they figured out how to machine the thing perfectly.
Been using battery screwdrivers since the eighties and the best bits I've found are dewalt ,I buy small clear box of 50 or 25 pz2 ,and I've tried them all including impact bits they all break but the dewalt last longer and are cheaper
Wow it’s a clear lid 🤯...😂 how hard was it to label your old kit? 🤷♂️
The fact they attach to one another is honestly pretty awesome and would be nice I need to get some new kitsch anyways haha🤷♂️🤷♂️
You can label it, but you are wont keep a running list/inventory of each bit. Missing bits, or a custom kit with different bits would be harder to simply label the contents.
A clear lid, gives you all the info you need at a glance. Time saving.
The lazy issue. 😂
It's helpful if you could see the content before you buy them
I mean, I like the fact its clear... but it ain't gonna make my purchase descision!
Your videos are way too long. This should be a 2 or 3 minute video.
And this was a brief one...
To much unnecessary BS.....I only watched half of it and got tired... should go straight to the point ....
Your comment is way too long. You should just STFU scrub.
🖕
@@edcrespo1722 excuse me dude I didn't know you were so soft on something that wasn't even direct it at you. "Private attorney"
Thanks for the video, I hadn’t realised that I can see through a clear lid, or that black is a different colour from yellow. I think that’s where I’ve been going wrong. This will really help.
Vince, I agree that the magnetic bits are important to have versus a "good fitting" bit. More important is that you have a magnetic bit when you are teaching a child to drive screws. Kids get discouraged when the screw keeps falling away from the bit.
Kids can easily learn handling the non-magnetic as well.
I literally just upgraded my personal "extremely cheap Walmart only use around the house drill" which I kept in my bag for a while for rare emergency repairs to a Dewalt today, I also bought the kit you went for at the end. I'm still newish to what people call pro level brands. But the price point and what came in it is what sold me. Yeah, there are a few odds and ends pieces I still need for what I do at work, like a right angle adapter, but it isn't used anywhere nearly as much as what's in the kit.
The Max Fit kit that he shows in this video is current $9.97 @ HD. I bought it yesterday and this video suddenly appears today on my UA-cam recommended list.. UA-cam and google is watching me.
Probably pick up both, toss the bits i dont like/use in my old case for stock and setup each for different tasks, myself. Mainly want those clear lids.
I can tell you - when someone has a skill-set , presentation skill and knowledge they are a worthwhile time spent watching.
Your presentation and loquacious nature overpower your content and any teaching that
Would come out of this video.
I have been in TV production for a while and your presentation is very thin when it comes to content and entertainment value.
In this space it is all about presentation and entertainment
You focus too much on what you think you are. ( me myself and I)
You speak like an authority in the subject often about stuff that only is interesting to you, to hear your own voice - Loquacious person.
It is not only about you in the public space of media content - good luck from an old timer in broadcasting.
looks like two peas in the same pod since you have to write a dissertation instead of a comment.
150,000 people disagree with you Red Robb.
I have a hard time understanding how he is wrong. Vince most certainly seems to like to hear himself talk but it could be clouded by the fact that he is a UA-camr. He probably feels like he is doing everything right but he most certainly drags on and takes a long time. Regardless, constructive criticism is always a good thing and shouldn't be considered being negative.
First-Just write the contents on the boxes. Second- Put a runber band around the boxes. Done in less than four minutes. I think that you like to brag on the job or at the pub what a great UA-cam star you are.
Seems nice enough but imagine him as your boss on the site, nothing gets done but he feels good about telling you over and over.
I bought 6 amp batteries a DeWalt within 3 years they were cracking or they slide back into your drills and sawzalls I was shocked at Lowe's gave me new ones to replace them they cost about $200 for two of them I'm so grateful to Lowe's
I stopped buying kits years ago as I have loads of stuff that I don’t use from kits years ago. Just buy what I need when I use it most wera PZ2 bits 25 at a time usually
Just said the same thing. Kits suck!
We had a drill sergeant join our ranks one training cycle that was just like this cat... loud, not too bright, went on and on without getting anywhere. Needless to say, he wasn't all that popular with the recruits, but us NCOs found him endlessly amusing ;)
You take too long to get to the point. Your videos are typically click bait. 1hr of video to say 10minutes of information. Just keep it simple
3 minutes of info packed into a 25 min video
@@Stan9106 repeat repeat anoy
Is 1 hour of rambling. Watch a tool comparison video lol
I agree. 30 minutes of shouting with basically zero information value. Waste of time.
because you are dealing with an idiot
If possible, would pick up..... both. If each has pluses, which can save me time, issues on projects, making more people more versatile and better use of their time...
The mag connection, can get tossed in as another bit in the box. Have "other bits" tossed in the yellow box already in my bags. Yes, solid coloured boxes - get written on and always have, just a fact of life. Someone looking for "the clean image" will find they spend time looking. Those who do not care about the outside and willing to write on them? Hit the main face with detail/notes and sides for when stored vertically. After all, if organized and restored after each project or shift in a project - can find in a moment. If always done and an emergency pops up? Can grab the appropriate items quickly and be on the move.
Thanks for the info, appreciated.
Wow $10 for that kit I just got one at home depot in Canada it was $42 man we get the shaft in Canada compared to US.
Thank you for your time and posting. I'm buying in a few days (but missed the free battery) the FLEX FXM202 -2B kit. All the bits I got are from garage sales. All I ever need. Thank you again. :)
At 19:28 you experienced why I have always hated those tiny bits that go in the magnetic sleeve. Too often the bit stays on the screw. I would only use the 2" bits that lock into the driver. But the new Milwaukee tiny bits actually lock into the sleeve.
I did buy some Dewalt bits with the magnetic sleeve when I saw your video awhile back. I had never seen them until then.
A little masking tape on the bit then force it in the bit holder. Bit will only come out with pliers. Cheaper than buying 2 inch bits and they will be magnetic.
I have the opposite problem, the holder requires a few whacks on something sturdy to release the bit. I keep the same bit in until it breaks or wears out, and just swap the holder out entirely with a 2" bit when changing to different screws, seems counter intuitive but it's faster than fighting with it.
I normally go with Bosch for bits and drivers, but typically use DeWalt cordless and Bosch corded tools. DeWalt drill bits are all solid choices I have a few of in my shop at all times.
Vince gives it to us straight. That’s why we’re all here! Have a great weekend bud.
Thank you Rob and Sarah! Have a great weekend!
I had this same problem when I bought a couple of Milwaukee kits on BF. I took all the bits and holders out, grabbed a forstner bit, hogged out some holes, and glued in some plexi. Problem solved.
"This is a combo-nation" 😂😂😂
“In my opinion” this guy is made for video great gift of gab. Love it... can’t imagine him getting any work done on the job with his gift of gab. Keep up the great videos
Vince actually dribbles more than my wife..
I didn't think it was possible but i've been proved wrong once again..
proven*
ahh Christ I sound like MY wife
You are 100% right about needing magnetism on those driver bits especially when you're running miles a freaking pipe in the building and you're up on a ladder constantly I don't want to have to get down to pick up a thousand f****** screws I'd rather have the magnet it so I can have one hand on the ladder or the lift control or the pipe I'm passing into the wall and ceiling or Joyce anyting and the other hand on my driver and be able to securely put it in without having to put a new screw on every 10 seconds cuz I'm in a hurry and if I'm not using a magnetic tip it falls off right as I get the damn thing into my one hole strap or the tapcon falls out of the 5/16 bit because it's not magnetic I love this video you are 100% right or at least I know some people disagree with you but I agree with you 100%
Who else was like “screw it I’ll watch the whole thing I’m quarantined anyways”
Black Friday deals for 2 months during Covid I found myself with about 10 of the clear case kits.
They snap together for easy storage but if you have 4 or 5 snapped together keep your main kits on top.
I could probably get away with 3 or 4 of them but it's nice to have the option when needed.
Love that you, and your channel, know what a Robertson is. Robertson’s may not mean much in the USA but in Canada they are well regarded. Any stripped Philips can be scoured out and use a Robertson to remove the otherwise stripped screw. If the Robby’s round off then shave me down for ice picks and other useful things
I have had several bit kits, screwdriver sets etc that did not nail the number 2 at all. My theory is that they were actually meant for something specific. Such as wood screws vs. drywall, something like that. But I have found discrepancies with tooth width, tooth taper, AND pitch... and they were most certainly #2. Number 1 or zero I never have trouble. 3s however, same issues albeit less often. I think it's a specific Phillips type, that some companies didn't know or didn't think to put on the label. I never seem to notice a difference... until I spin a couple. I actually keep some softer bits handy to sacrifice, just so i dont gotta deal with stripped heads in a mismatch.
I just use a sharpie to tell them apart, they’re construction tools and as such I don’t expect them to win any beauty contests
I am new to your channel, but I like pretty much all the videos I have seen from u...... I don't understand why there's so many dislikes. I think it was a good video and even if I disagree with what u said (like if I don't want a clear lid or I like a different brand) I wouldn't hate...
So you get a big thumbs up from me sir!! Keep up the great work!! Can't wait to see more of your videos!!
"Going to make this one breif"
*checks timebar
26 minutes. niccee
You are passionate about your work, and it makes watching your videos more beneficial to me. I have learned a lot from you, so thank you for that! What is your opinion on Wurth screws / fasteners?
i'll tell you why it's a good idea to have a straight or flat head, or blade bitt, if you bugger up or fuckify (strip) a screw or bolt head, grind a slot accross it, get it out with a straight bit
What a beautiful tool tip you wonderful human nowhere on UA-cam is a video showing such a simple and awesome solution.
@@ared18t no problem, one of my bosses is 88 ,so he knows tons of tricks, i'm an auto body guy , by the way, so we do a bit of everything, so he teaches me all the usefull engineering tricks
Great tip
Or the rubber band trick
@@KARLOS121 i don't know the rubber band trick,,,,help
Ok, i get what your saying about the clear lid on the case, but those break much easier than the other ones. First time a saw gets set on it, board falls on it, or it gets carlessly thrown in back of truck, your done. Half of bits missing and a sharp edge on the case. I will stick with my old kit. It works and im happy with it.
We're gonna keep this one brief.....a year later
I have a magnetizer that's maybe 25yrs old. Works great! Still use it all the time.
ya DEWALT does make great fit bits but i try to stick with the t20's and t25's on any job
LMFAO the "walk with me, walk with me, walk with me", this dude knows.
FYI: the new craftsman bit cases are also clear, lock together and also lock to those Dewalt cases
This show gives you all the ideas you need to match your tool bench to YOU.
I've always loved their max fit kit also. I was extremely glad to see when they updated the case.
With the magnet it makes the kit professional!
Way ahead of DeWalt: I keep all my bits in a very thin transparent plastic bag.
Where do you get those?! Never heard of them. Genius!
The best part about this video is how you get straight to the point 🥱
Thanks Vince for the info, I got the Makita gold bit set for $10 like 2 weeks ago but I'll look into them for the future.
This is why I’ve used these kits for 20+ years in electrical work and at home in building tabletop gaming and train tables
By Christmas you will be jonesing over the 64 bit box that has both sets in one box. Why doesn't Dewalt offer an empty 128 bit box so we can combine all the smaller sets into one box. If they haven't thought of that please pass it along to them.
Yes please offer us the empty box
With most of these boxes you can slide out the inserts and build your own box of bits.
I like your videos. Very detailed and informative. I'm a retired AF aircraft mechanic, and I work on my cars. I love my tools, and I can tell you really take your use of tools seriously. Great job. Glad I stumbled on your videos. I've subscribed...
Bro, use the guide/sleeve and slide it down the screw! You do this for any screw longer than an inch, every time. This has to be a spoof.
Got all i needed in five minutes.
And I have a sharpie and am not afraid to use it.
Clear boxes get scuffed and cloudy AF after a while. Just saying.
And dude....DECAF......DECAF!! Hahahahaa!!
I once saw a vid by a guy called Techmoan on YT... he was restoring a record player with a clear plastic top. He used Brasso, wad of material in a can (not the liquid version) to "sand" clear plastic smooth. Its a hidden gem. From England I believe.
LOVE THEM. Bought them for my son too. Sad Father’s Day this year. Anyway, love the tips, bits and CLEAR lids.
Thanks for taking they time as usual you guys did a great video. I definitely agree with you Vince magnetic bits is the only way to go.
Magnetic!!!!!!! 👍👍👍👍👍👍👍👍👍 Vince Great Video ✌✌✌✌✌✌
i have been out of construction for a couple of years. Started a remodel of my kitchen, so i went to HD to get a new screw driver sleave. I could not find one . Only these Max kit, no sleaved extension, I had to order it and it is still waiting now a month coming from California. some of the bits were a bit confusing. The little yellow thing is nice to know what it is, though it seems a pain getting the bit out. Also the bits do not seem to fit anything for quick change in the kit. Thanks for the information.
Good luck Brent! 👍🏻
I bought a set of those around last Christmas. The cases are much easier to get bits in and out of
I have the $10 kit. I love this kit. I use torks, philips and 5/16 every day. The magnet is a bonus. I bought one for my dad for Christmas.
They have a kit at the Depot with the magnetizer in it now
I lay my bit boxes OPEN in the tool chess. No clear lid, no lid AT ALL. Clear lids are fragile and will break on a job site. Sharpie's better. So you lock 2 boxes together and can't see what in box number 2.
lets see a TTR showdown those vs the Milwaukee Carbide..
For #2-Philips... you should give Apex a try. I've been using the same one for over a year. They look weird but they're the best fit and durable.
Just get to the damn point and stop lying about how fast this is going to go.
Edit: 7 minutes in and all I know is that you prefer a clear lid.
For at a glance identification you can use varying color tape as labels and you can even use different patterns.Single stripe, double stripe, etc.
Keep preaching brother so true about not all bits be equal.
I agree tons of companys dont do the number 2 bits very well for fitment
I like the $10 solution for the kit. There’s too much filler in these kits that I wouldn’t use a ton to justify the higher prices. I’ll probably go the $10 kit and then replace the commonly used stuff (#2 and t-25) with the higher quality bits as they wear out.
I Have commented on your videos before. I Build decks for a living. I will say if I was buying one of those two kits it would be the maxfit. I also agree dewalt makes the best fitting bits out of the ones I have used. I however do not buy kits. We go through t25 bits like crazy. I am talking 100+ per year. I buy the bulk bits. I also have used the extension like in the maxfit for years. How ever because of the way the bits fit in the deck screws I use. We were always having the bit pull out of the extension. Like you said time is money for small business owner. Dewalt now has an extension that locks the bits in. I have not had mine long enough to know how good they are. I do know I am not having to put my bit back in the extension all the time anymore though.
Thanks for the feedback cuz we appreciate it!
Very frustrating to watch this from the UK, you have a choice of products and prices we can only dream of ....
Sorry Stephen, visit the states on “business “ !
I really enjoyed your presentation of these Dewalt Drive Kits. I just got a New 20 Volt brushless Drill driver, now I have to get some bits. I now know what to get! Thanks so much for your enthusiasm. It's a pleasure watching you explain even the smallest nuance of any product that your presenting. Looking forward to more of your presentations. Thanks again!! Mark G.
He’s paid by Milwaukee lol,just watch a few of his videos
Paid by Milwaukee and using Dewalt tools...very funny....lol btw did you watched entire video?? He love new bits kits!! from Dewalt...i won't buy older...
@@KallenSC he's paid by Milwaukee , that's true. you can watch all his videos
@@locdo1706 Then why this man paid by milwukee buying and using Makita tools and Dewalt tools??;)
You should watch all his videos, he always defaming Dewalt , in some videos he use some small Dewalt products or Makita to make people believe in he also use Makita and Dewalt.
So far in my career I have less problems with Milwaukee products. I always liked DeWalt before I worked construction for a living, now I'm a Milwaukee man from experience and Bosch tools ain't bad. Ryobi for the price ain't too bad( cough cough). More people than not I run across use Dewalt and they don't have many problems but I stand by Milwaukee just from personal experience.
Brief? it is 26 minutes long I need the TL;DR version.
If there's ever a tool dedicated shopping channel, V is going to be the most qualified guy to be on there!
@@Zozo806 I'm sure he could sell what ever they give him.
Can you shout a bit louder?
Shopped for a new impact and went for the Makita xt 268 mainly for the xdt14 impact.... but when I shopped for a bit kit...I’d say hands down price and component pcs the dewalt max fit 60 pc in its clear lid case was the choice for me... not a real brand only guy (yellow,red,blue etc.) but I have used all brand of bits and the dewalt have made me appreciate it ... as for the impact... had to go with the Makita xdt 14z for its compact size... 👍🏼
Why deos he have to shout at us. We are not all hard of hearing ? Quite off-putting !
I have the same case, I took out the part that holds the bits and use it keep some of my essential sockets inside it so they're all in one place. Works well for when you have to take some tools out of your truck or tool box and bring them to the job in a tool bag or bucket.
Time is money, I have just lost tons of money waching this ussles video!!
Man I love your video! By no means do I need 80% of these tools you review but your eye for detail and energy is what keeps me tuned in. Keep it up!
26 minutes and you say you don't have "enough time"
yup, i went thru bits like crazy but the quick change accessory was good for impact/hammer drills
I think they are made cheaper now.. 7 ,8 years ago they were better ,I think they cheapened them up.. O yeah , I am going out tonight and I will be doing the DAWHAMMY!!!!🍻🕺🕺🕺
🤣🤣
The new dewalt 50x bits are actually really strong and last long, just like the new Milwaukee 50x bits. I have and use both. But I have tons of other kits also just because I need a large variety at all times. So I have like 35 driver bit sets made by every brand. Bosch are pretty good with a nice variety of lengths and sizes.