Talking with hands, shows higher intelligence, that's what I was told/read, and I'm sticking with that, as I do that sometimes not even realising, hehe, I think it means I'm clever, go DeWalt, 👍
As an electrician and HVAC tech I have used the right angle attachment and metal shear attachment A LOT. Great attachments. Save on efficiency and headache. Great job man.
I picked up the 100pc Dewalt bit tough case at Lowe’s for $50 and a couple smaller ones for $12 Definitely a steal and worth every penny These bits go all day
I have the DeWalt right angle accessory. It is a life saver for small spaces. I recently purchased the toughsystem 2.0 toolboxes, they are fantastic and worth every penny for them.
I'm a milwaukee guy but i recommend love dewalt bits i work at home depot and we store used dewalt bits for demos the customers will drive the screws 5 inches deep in 2 stacked 2x4s and the bits held up
Me too... my electrical trade school teachers sent me to the M12/ M18 family. Working in Construction led me to Dewalt tools, and I bought 20V tools for my house/yard work. Now my son moved close by and as a new homeowner, I started him off on all 20V Dewalt tools and then I handed my Dewalt tool belt and tote over to him. Dewalt and Milwaukee have helped me with my legacy that I’m leaving behind. Peace Be The Journey!
I almost fell out of my chair when you started shaking those yellow DeWalt bit boxes. 1 or 2 "tinks" is Phillips head bits. Lots of tinks are the flat heads. 1 or 2 dull thuds are the good drill bits and lots of thuds are the chewed up ones. If there are no rattles when you shake it, it is also the Phillips head bit box but give it a sniff, might be the bosses weed stash. Very funny shit!!!
I was not aware they made the bigger bit cases and so I'm glad I watched this one! But, it also made me realize I've developed a pretty serious tool addiction cuz it turned my day around lol I gotta say though, I kind of blame y'all for feeding that addiction with all the videos about deals so I need you guys to talk to my wife about this situation or send me list of more excuses or something lol keep up the great work guys and don't do anything I wouldn't do twice. If you do, don't name it after me!
The power station is bad ass. I used it on power outages to power lights and tv. I’ve also used it for a small air compressor and miter saw for an easy molding/trim job.
I do use Dewalt bits primarily...I have a set of Wiha Terminator bits I like too though.. Ridgid Pro Gear storage... much less expensive and made (reinforced) with fiberglass filled nylon like all the others... good stuff...🙋♂️thanks Nick...
I've used Dewalt almost exclusively for 20 years. I've been tempted to swap to Milwaukee, but I have never had a failure with any of my Dewalt tools. Love their bits as well.
I love the dewalt bit cases you show. I got multiple and love the clear slides, connecting and customizing. However I recently got a bosch custom case and it has become my go to case. It doesnt connect but it's easier to customize, take the bits in and out and see what size bit you are taking out.
Only reason they do those "deals" is to get rid of overstock cuz the shit is garbage...bought my father in law the Ryobi cordless orbital sander and he is a hobbyist and it literally didn't last 2 months they sell them cheap bcuz there made equally cheap that's not to say dewalt dosent have a cheaper line but when u spend a little more you get the quality
I love my tough cases 2.0! I have 2 stacks. One day I forgot to close my tailgate and a couple of tough cases fell out on the road. It was a BAD TIME and one of them was open, long story short, the boxes held up great, just make sure you keep them closed.
my favorite tool storage system is the ridgid modular system however i am team yellow to the bone. and my favorite on the list is the battery charger power station, that sucker is pretty cool!!
Dewalt LETS GO BABY!!!!!!!!!!!!! And dewalt already makes my life easier! Thanks for this list I will have to buy that power station! SMASH THE LIKE BUTTON
Mooo Powaa Baby!!!!!! Nice that is has 15amp power wonder how it would stack up against the ego.. but for the worksite to simultaneous charging is awesome!
I was just wishing there was a milwaukee track saw, im in m18, m12 and dewalt 20/60 so i could go with either but i would like the option. Might have to pull the trigger on the flex
@@reddawgrup1779 i like the makita saw, it makes great cuts, im not in the battery platform so i would be starting from scratch. Also the makita track lengths i saw locally were $79 for a 39 inch section and the $39.99 for connectors. Crazy expensive
Just bought a few toughcases and organized a few bit sets that I had laying around. Unfortunately, I can’t for the life of me find just the dewalt bit-bars sold separately (Ideas anyone?). I had a few of the older all yellow cases laying around, but still not enough to fill the empty case completely.
Nice video. For my favorite 'DeWALT Tool' may I suggest any of their mechanic tool sets. Although the tools themselves are really great - the huge value is in the case. These tools do not spill out like the old Craftsman mechanic sets from when I was a kid. Everything stays tight and secure. I got a set in black chrome - and they are easy to read and use. Just my two cents.
All I need now is to decide on a new impact driver! I like the Ryobi with the magnetic tray, as I like the Milwaukee with its power, though I really really want to check out the DeWalt impact driver even though the batteries are off the hook with their prices.
NICK! Where you been? Woah! Dont drop the Power Station. Big Red needs to make some small Packout Accessory Bit Cases. Half size of the Compact "Low Pro" Organizer (1 row of treads) #4 - I use those "Dimplers" all the time, last week in fact. #2 - Yes, those shears R 🔥🔥🔥🔥🔥 Milwaukee Nick, Tell Vince I'm Checking that fence on the 12"
Have you done any videos on the durability of the flex volt batteries I've used two of them for a full year plastic sides are falling apart where the screws go into they are all split I have splits going across the whole side it's like the plastic is not durable enough to be in a steady HGV workshop how have you found them I've been talking to the DeWalt and they do not sell plastic side so I can can repair my flexvolt batteries all they told me is the bin them they don't even do a send away service and repair what are your thoughts
Great video. Awesome energy! I have the Tough Cases and think they're fantastic. Never heard of that shear attachment. I actually could have used that yesterday 😂
Love that power station and what it offers you. Might have to grab one, but pretty expensive. Well.....I wonder what new stuff Milwaukee is going to have to offer us in just one day. Happy Milwaukee Eve !!
What the heck happen to the extra wide Dewalt flextorq bit set in the toughcase+ that connects to tstak? I was getting ready to get it and they just up and out of stock.
my problem with dewalt bit and drill sets is they always seem to be too broad in scope, they're always a hodge podge of common stuff so you still have buy individual parts to round them out. I wanted to buy a big kit of the new dewalt cases, but the bits and such that came in it were repeats of Philip bits, and was lacking varied torx bits and larger drill bits. ended up getting 2 cases from bosch that had all the fastener and (carbide) drill bits i needed, for less than the big pack from dewalt that had like 60 phillip bits for no reason.
I’m a little lustful for that metal shear attachment… I’m terms of my favorite tool, it’s gotta be my Chapman screwdriver set. Bought the complete set when I was 18 and I’ve never been at a loss when I approached a screw through thousands of projects. My only regret is lending it to (non tool loving) people who lose the bits 😅
What is up with Dewalts website? I noticed if you want to look a product up and click buy now. None of there products show where you can buy that item. Any clues
Would love to see the big tough case bit box to be made for ToughSystem. I only have one T-Stack and it stays in the shop only getting used for the finish stuff, but I have so much ToughSystem so that big bit box made for ToughSystem would be sweet.
lol love black and yellow but damn if I didn’t drop my DeWalt toughcase 3 feet from the shelf in the truck and it shattered the plastic around the latch, so I got a new one already. Love them flextorq bits hella though
I do like dewalt bits they are however second in line to wera in my tool collection as the wera are the best bits I have ever used. I'm loving your recommendations so far nick thanks!
Bragging on dewalt but yet pretty much every other brand has what he mentions i mean even craftsman has the drywall screw setters, the dewalt drill kits suck because the bits easily fall out.
The right angle accesory saved my tail just a few weeks ago. Works great and great value! Yall know your stuff and give awesome advice, thank you and keep it up!
Thinking about the next power outage. Just bought an adapter for my Dewalt 20v battery’s with 2 USB ports and an LED light. $20 on eBay. If it works well I’ll be getting more. There are adapter’s for other brands of battery’s too.
Everyone thinks nick just talks with his hands, but he’s actually defending the shop from invisible ninjas while he gives his list
😂🤣👏👏
Talking with hands, shows higher intelligence, that's what I was told/read, and I'm sticking with that, as I do that sometimes not even realising, hehe, I think it means I'm clever, go DeWalt, 👍
Is that why there is no green ninja
Those damn dragons man
@@WallStreetVikings 😂🤣
As an electrician and HVAC tech I have used the right angle attachment and metal shear attachment A LOT. Great attachments. Save on efficiency and headache. Great job man.
in my opinion the dewalt bit sets are the best bits on the market. black Friday sales set me up for the year.
I picked up the 100pc Dewalt bit tough case at Lowe’s for $50 and a couple smaller ones for $12
Definitely a steal and worth every penny
These bits go all day
Just picked up the storage system love it. Also love that I can leave it in my truck and not worry about the rain.
I have the DeWalt right angle accessory. It is a life saver for small spaces. I recently purchased the toughsystem 2.0 toolboxes, they are fantastic and worth every penny for them.
One handed baby one handed!! That’s the power of Dewalt!!!
Who hates Dewalt but watched for Nick !!
Nick is seriously one of my favorite people
I'm a milwaukee guy but i recommend love dewalt bits i work at home depot and we store used dewalt bits for demos the customers will drive the screws 5 inches deep in 2 stacked 2x4s and the bits held up
Me too... my electrical trade school teachers sent me to the M12/ M18 family. Working in Construction led me to Dewalt tools, and I bought 20V tools for my house/yard work. Now my son moved close by and as a new homeowner, I started him off on all 20V Dewalt tools and then I handed my Dewalt tool belt and tote over to him. Dewalt and Milwaukee have helped me with my legacy that I’m leaving behind. Peace Be The Journey!
This guys way better than Vince , straight to the point 👍
I almost fell out of my chair when you started shaking those yellow DeWalt bit boxes. 1 or 2 "tinks" is Phillips head bits. Lots of tinks are the flat heads. 1 or 2 dull thuds are the good drill bits and lots of thuds are the chewed up ones. If there are no rattles when you shake it, it is also the Phillips head bit box but give it a sniff, might be the bosses weed stash. Very funny shit!!!
I was not aware they made the bigger bit cases and so I'm glad I watched this one! But, it also made me realize I've developed a pretty serious tool addiction cuz it turned my day around lol I gotta say though, I kind of blame y'all for feeding that addiction with all the videos about deals so I need you guys to talk to my wife about this situation or send me list of more excuses or something lol keep up the great work guys and don't do anything I wouldn't do twice. If you do, don't name it after me!
I can mute this and still understand everything because Nics hands can speak. 👍🏻👍🏻👍🏻
Great videos guys !
🤣😂🤣🙌🙌
Absolute shear excitement lol. Very nice Nick 👍
That little section about the old yellow bit cases was the realest shit I’ve ever come across on the internet ever lol
The power station is bad ass. I used it on power outages to power lights and tv. I’ve also used it for a small air compressor and miter saw for an easy molding/trim job.
I do use Dewalt bits primarily...I have a set of Wiha Terminator bits I like too though.. Ridgid Pro Gear storage... much less expensive and made (reinforced) with fiberglass filled nylon like all the others... good stuff...🙋♂️thanks Nick...
I've used Dewalt almost exclusively for 20 years. I've been tempted to swap to Milwaukee, but I have never had a failure with any of my Dewalt tools. Love their bits as well.
Milwaukee is slightly better but if your already invested in the batterys it's not worth swapping
No offense to the tough systems storage but my hearts with the pack out, but it is filled with black and yellow❤️
I liked the dewalt coffee maker the best
I love the dewalt bit cases you show. I got multiple and love the clear slides, connecting and customizing. However I recently got a bosch custom case and it has become my go to case. It doesnt connect but it's easier to customize, take the bits in and out and see what size bit you are taking out.
Thank you for sharing the awesome feedback and experience Gatorman10!
DeWalt needs to get us some solid deals A$AP to match Ryobi Days and the recent onslaught of Red and Black sales at the Depot!
Only reason they do those "deals" is to get rid of overstock cuz the shit is garbage...bought my father in law the Ryobi cordless orbital sander and he is a hobbyist and it literally didn't last 2 months they sell them cheap bcuz there made equally cheap that's not to say dewalt dosent have a cheaper line but when u spend a little more you get the quality
@@dosentmatter8169 got one myself, no issues, works great. going to have some duds out there, even with dewalt
I’d have to have a deal to buy Ryobi.
I love my tough cases 2.0! I have 2 stacks. One day I forgot to close my tailgate and a couple of tough cases fell out on the road. It was a BAD TIME and one of them was open, long story short, the boxes held up great, just make sure you keep them closed.
This guy is a good host 👍
He reminds me of that auto mechanic guy Scotty Kilmer with all that nervous hand waving when he talks. Super hyper. I enjoyed the video just the same.
He's a dynamite salesman
Dewalt rules baby!!
Nick really shows how he really is a "handy man", in his videos
Thanks for the info
Love it when Nick is In the vidyas
Does DeWalt do the bit sets for the tough system, or is it just for tstak?
They now make an adapter plate.
The construction Mac miller
Good video
Raymond! Best company in the union
my favorite tool storage system is the ridgid modular system however i am team yellow to the bone. and my favorite on the list is the battery charger power station, that sucker is pretty cool!!
I like Kobalt drill bits they have never let me down
I crap on dewalt drills but I like their saws and unusual tools like tire inflators.
i like the bosh bit kit
Dewalt LETS GO BABY!!!!!!!!!!!!! And dewalt already makes my life easier! Thanks for this list I will have to buy that power station! SMASH THE LIKE BUTTON
Mooo Powaa Baby!!!!!! Nice that is has 15amp power wonder how it would stack up against the ego.. but for the worksite to simultaneous charging is awesome!
1:00 I dunno where to get that in the uk for 230/240v
Kermit the frog would be proud! yayyyyyyyyyyyyyy!! 🦾🐸🤳
Any chance that Milwaukee will make a track saw or should I plan to go Dewalt for my battery platform since they have a track saw?
U should go dewalt regardless
Ive had the dewalt power track saw for many years still goes hard. If i could afford it, i would go cordless ($900 here)
I was just wishing there was a milwaukee track saw, im in m18, m12 and dewalt 20/60 so i could go with either but i would like the option. Might have to pull the trigger on the flex
@@reddawgrup1779 i like the makita saw, it makes great cuts, im not in the battery platform so i would be starting from scratch. Also the makita track lengths i saw locally were $79 for a 39 inch section and the $39.99 for connectors. Crazy expensive
Just bought a few toughcases and organized a few bit sets that I had laying around. Unfortunately, I can’t for the life of me find just the dewalt bit-bars sold separately (Ideas anyone?). I had a few of the older all yellow cases laying around, but still not enough to fill the empty case completely.
Love DeWalt tools the bit kits are great I bought the dry wall screw bits for no more I do drywall work I can't justify buying a drywall drill
Nice video. For my favorite 'DeWALT Tool' may I suggest any of their mechanic tool sets. Although the tools themselves are really great - the huge value is in the case. These tools do not spill out like the old Craftsman mechanic sets from when I was a kid. Everything stays tight and secure. I got a set in black chrome - and they are easy to read and use. Just my two cents.
I Need to get that DeWalt power station 🙌🍻
Finally a good dewalt video
I love Dewalt tools
Keep the videos coming 💚💙💖🧞♂️
All I need now is to decide on a new impact driver! I like the Ryobi with the magnetic tray, as I like the Milwaukee with its power, though I really really want to check out the DeWalt impact driver even though the batteries are off the hook with their prices.
I think Milwaukee batteries are more expensive
Thx for the list! 👍
Those drywall screw adapters are going to save me time and $$ . Getting a box tomorrow.
Yo nick be talking about tools, training for a boxing match, and practicing his orchestra conductor skills all at the same time!
NICK!
Where you been?
Woah!
Dont drop the Power Station.
Big Red needs to make some small Packout Accessory Bit Cases. Half size of the Compact "Low Pro" Organizer
(1 row of treads)
#4 - I use those "Dimplers" all the time, last week in fact.
#2 - Yes, those shears R 🔥🔥🔥🔥🔥
Milwaukee Nick,
Tell Vince I'm Checking that fence on the 12"
After watching this video don't need any birthday ideas for my dad. Thanks VCG Construction.
I like your hand movement's
Have you done any videos on the durability of the flex volt batteries I've used two of them for a full year plastic sides are falling apart where the screws go into they are all split I have splits going across the whole side it's like the plastic is not durable enough to be in a steady HGV workshop how have you found them I've been talking to the DeWalt and they do not sell plastic side so I can can repair my flexvolt batteries all they told me is the bin them they don't even do a send away service and repair what are your thoughts
Do dewalt do a straight jacket?
Thanks for your information
Great video. Awesome energy! I have the Tough Cases and think they're fantastic. Never heard of that shear attachment. I actually could have used that yesterday 😂
Awesome video and list Nick! 👍🏻
Love that power station and what it offers you. Might have to grab one, but pretty expensive. Well.....I wonder what new stuff Milwaukee is going to have to offer us in just one day. Happy Milwaukee Eve !!
Can’t wait bro!!
Hoping they offer an m18 power station big watts hehe
@Nate C Me too. I could really use something like that from Milwaukee more than DEWALT
My favorite is actually the dimpler, got me out of a lot of jams, I don’t like running home for tools, but I use Packout
Dewalt have good bits of all kind
I prefer the old dewalt bit holders because I use them in my toolbox as organizer trays, the news ones with the protruding clip don't fit.
Where can you find these new clear box bits ? I can’t find them at home depot
Try Lowe's home improvement!
What the heck happen to the extra wide Dewalt flextorq bit set in the toughcase+ that connects to tstak? I was getting ready to get it and they just up and out of stock.
my problem with dewalt bit and drill sets is they always seem to be too broad in scope, they're always a hodge podge of common stuff so you still have buy individual parts to round them out.
I wanted to buy a big kit of the new dewalt cases, but the bits and such that came in it were repeats of Philip bits, and was lacking varied torx bits and larger drill bits. ended up getting 2 cases from bosch that had all the fastener and (carbide) drill bits i needed, for less than the big pack from dewalt that had like 60 phillip bits for no reason.
The vest show on UA-cam smashing San Antonio tx the like botton yahoooooooooo kaboooooooooooooom
Love all VCG Vids, Love Vince Vids, But Those Nick Vids! Let's go baby!
What’s the number for the big bit set
I’m a little lustful for that metal shear attachment… I’m terms of my favorite tool, it’s gotta be my Chapman screwdriver set. Bought the complete set when I was 18 and I’ve never been at a loss when I approached a screw through thousands of projects. My only regret is lending it to (non tool loving) people who lose the bits 😅
I have the DeWalt Stackable drill & driver bits. #gamechanger
How long to charge a 4 amp battery?
I have the toughsystem 2.0 and it is in fact compatible with my gen 1 radio
2:49 i lol'd... vince's face is money.
Rather see active hands than hands in pockets. Keep it up
Good job on the video Nick.
I'm a German Metabo, Fein, Bosch kind a guy, with a little Makita, and some 12V Milwaukee mixed in there.
That’s it? Haha
What is up with Dewalts website? I noticed if you want to look a product up and click buy now. None of there products show where you can buy that item. Any clues
You should do one of these for each tool brand 🙏
I love dewalt everything but I will should the Milwaukee packout over the toughstack
Good video mate 👍
Can you run a small tig welder with the power station??
Lol man those hand movements are killing me!
Would love to see the big tough case bit box to be made for ToughSystem. I only have one T-Stack and it stays in the shop only getting used for the finish stuff, but I have so much ToughSystem so that big bit box made for ToughSystem would be sweet.
Love those shears!
lol love black and yellow but damn if I didn’t drop my DeWalt toughcase 3 feet from the shelf in the truck and it shattered the plastic around the latch, so I got a new one already. Love them flextorq bits hella though
Y'all should definitely give Nick a maraca cuz he could really shake that bad boy up
Love the Milwaukee tools in the background😂
Anyone know if the Kobalt xtr 5-tool sets supposed to go back in stock soon?
cant go wrong with dewalt.
Dewalt all day, would love to see more flexvold reviews like their SDS drills
I Love the video and love the energy you’re bringing brother. I’m on the way to Lowes right now 🤣
I do like dewalt bits they are however second in line to wera in my tool collection as the wera are the best bits I have ever used. I'm loving your recommendations so far nick thanks!
Bragging on dewalt but yet pretty much every other brand has what he mentions i mean even craftsman has the drywall screw setters, the dewalt drill kits suck because the bits easily fall out.
I do use dewalt new stackable tough cases for bits
I think josh blue is behind him being his arms! Lol
The right angle accesory saved my tail just a few weeks ago. Works great and great value! Yall know your stuff and give awesome advice, thank you and keep it up!
I'm currently partial to the Milwaukee pack out but that's probably a lack if seeing all options
Thinking about the next power outage. Just bought an adapter for my Dewalt 20v battery’s with 2 USB ports and an LED light. $20 on eBay. If it works well I’ll be getting more. There are adapter’s for other brands of battery’s too.
When is Dewalt coming out with a cordless 23-gauge? There going to make me by Milwaukee or makita... please advise