Audi RS3 Unitronic Dogbone Mount (Street Version) Install & First Impressions
Вставка
- Опубліковано 5 вер 2024
- Unitronic now offers an upgraded dogbone mount and I jumped all over the opportunity to test and review their Street version. In this video we install the mount and then I give you all my very first driving impressions after spending 30 minutes on the road after the install. Stay tuned for when the Race/Track version of this mount is released by Unitronic because I'll be reviewing that version as well!
All hardware installations are performed by Reiter Performance. For more information on their services please reach them at info@reiterperformance.com or check out www.reiterperformance.com for more details
All dyno testing is performed at Racing Greed located at 1650 Broadway St Unit 110, Port Coquitlam, BC V3C 6P8. They can be reached at rg@racinggreed.com or check out www.racinggreed.com for more details.
For any business inquiries please email me at adam@vancityaudi.com
Website: vancityaudi.com/
Instagram: / vancityaudi
Facebook: / vancity.audi.1
#Unitronic #Install #Review
I completely forgot to mention that if you do end up needing to drop your subframe you should take your car in for an alignment after. Completely slipped my mind!
You should not if you use the 034Motorsport's Stainless Steel Subframe Locking Collars
@@antoniskonis8448 I would never recommend people use 034 products so I wouldn't ever say such a thing 😉
This dude is awesome. Killer Audi is content, and he's thoughtful in his explanations. Been a sub for years now.
Thanks for the kind words!
I installed the Unitronic Street Dogbone on my 19' RS3 with Stage 1+ ecu and 2 tcu with fbo for the stages. We tightened the bushing bolt to 15ft lbs rather than 10. I have a little NVH when the engine is cold but once warmed up, it's barely noticeable. I think it cleaned up the shifts a little under WOT in Dynamic Sport compared to stock. I am considering trying 18-20ft lbs on the bushing bolt to see if it sharpens up the shifts even more at the expense of a little more NVH.
It very well may. Most people care more about NVH than performance sadly so that's why Uni recommends such a low torque spec.
Great job! Perfect video like always. I assume that is way uni sent you the freebie.
I have 034 mounts. They helped my shifts greatly vs stock. I do believe I will be stepping up to the uni mounts tho. I just like the design. The stock rubber is so so soft. I understand why it's so soft but wow. The new uni unit just looks like the total package.
You have the 034 dogbone mount with the inserts? Have you pulled them out to make sure they haven't been bent? I went through 2 mounts of theirs. The ECE and the Uni mounts are much more comprehensive.
@@VancityAudi honestly I saw the bent mounts and really that does not bother me at all. Now if you had a broken tab on the mount that's another deal. But bent does not = crapy. If the product is providing the same results that's what matters to me. Unfortunately I had issues with my diff install and my car has been down nearly a year now. So I can't really speak on the long-term results of the 034 mount system. All I can say I that it worked vs stock. I saw a better launch with 034 system. From my CAD design background I can say the new unitronic system looks to be the best available option on the market. I like the design very much.
@@mikemounlio87 you and I think of aftermarket performance parts very differently. When I spend $309USD on a part, I expect it to not bend, not warp, not break, not fail and to do what it was intended to do. Not only that, I expect that when I pull it off my car, I'll be able to sell it to another party because it will be in nearly the same condition that I installed it. In this case I couldn't until I replaced the part that was bent. To each their own.
I'm not saying that it should bend. Just that if the part functions and does not actually break then who cares.
With as much as the motor moves in stock rubber I'm not surprised it bends the inserts. But then again the insert is only there to limit the movement and so far mine has done just that. Bent or not. Now if you broke one then let's take a minute to look over the design.
Maybe aluminum is not the best material for tha6 insert under such high loads. Maybe so ss would be stronger. But I bet it would not provide any better results. Just resist the slight bend.
Anyway non of that matters. The new uni kit looks great! Can't wait to see the 855 tune.
@@VancityAudi @Michael Mounlio I have the 034 mount as well and it didn't really help with the violence of the shifting from 1/2 and 2/3. All it really did was make my NVH worse. My question would be: at stage 2, go to the uni street mount? Especially because I don;t have to drop the subframe, just need to bang out the pucks, right? How do you like the mount vs the other 2? Great videos! Subbed for sho!!
I heard that some people with the ECE dogbone mount had the polyurethane melt. Could these have that same problem?
I would imagine that Unitronic spent the time on their R&D to make sure that won't happen. To this day, I haven't heard of any of the same failures on Uni's dogbone.
@@VancityAudi Thanks for the reply. Unitronic seems to have the best solution for the dogbone mount, I'll be going with them.
This just happened to me. My ECE stage 2 blue puck straight up turned into jello. Waiting on my Unitronic race dogbone to come in. Car is on a 68mm FF kit so I'll need the race ror sure.
@ece hope you got some royalties your way 👍🏾
I hope by actually watching the install that you can see the mounts are not built with the same design.
Are those bolts supposed to be replaced by new ones? Don't know recall where I heard the bolts are one time use....trying to validate if that's true?
Lots of the bolts are one time use in the RS3. Yet I think we've only ever replaced a couple, haha.
You compare it to the ece track mount
I have ece ver 2 street dog bone mount. You think the uni one is better than that?
I've never used the ECE Street Mount. I would assume the Uni one is better though. The design looks better.
I just installed this and feels very stiff compared to OEM. It’s also extremely loud in the cabin. Torqued to 20 (Unitronic website). This is on a TTRS. Any thoughts? Possibly normal - first time doing this.
Possibly installed incorrectly? It shouldn't make any additional noise. You just just feel more vibration and the ride will become a little more harsh. The only thing I can think of is that when it was installed incorrectly it was touching the sway bar and is causing unnecessary NVH. That's my best guess.
@@VancityAudi thank you for the input. Went to the local shop and had them torque to 10 instead of 20. What a difference. First time doing. Definitely still feel the additional vibrations and harshness. First time doing a mount so likely take times to adjust. Unitronic said it should break in over time too. Will check out the front sway bar!
If you only stage 1 do you really think you need it, over stock, will it make a different ??
Abso-freaking-lutely it will. Stage 1 cars can run 10 second 1/4 miles. Lots of power to hold on to.
Can you run this mount on a tte700 turbo or tte777
Absolutely. This mount has nothing to do with what turbo you chose to use.
I wanna get the unitronic mount but man is it over priced.. I have the ece one currently
You've gotta pay for the best! Haha. Ya, it's a little pricey vs what else is on the market, but I think it will be the best performing dogbone replacement on the market.