Another banger of a technical install video mate, loving the bush mechanics - not everyone has spring pullers or whatnot, but everyone's got a ratchet strap (or can get one real cheap) so this is the way to go. I'll attach the wire to the two side holes instead of the middle holes, but other than that I'm doing it exactly the same, installing it next weekend.
@@outie555 Good tip! btw, wind some velcro tape (about 20cm of it) around your handlebar, so that when you drop your bike, you can use it to tie the front brake which makes lifting it easier :))
Yes I will when I get some time. Basically very happy with them and they seem great so far. Got them from AliExpress with the extra exhaust side mounting bracket.
Yeah it's a great way to do it. I did try using the rear axle as the tie down point but the angle was wrong so using the shed door post worked a treat. Loving the bike and it's now very versatile with the panniers.
I’d be interested to know if you got the centre stand kit from your local dealer, or Uncle Wang’s shop? Thank you for the informative vid. 👍 Parts from CF Moto seem to be an issue in the UK at the moment. I couldn’t get a 15 tooth front sprocket from my dealer and eventually got one from Uncles Wang’s.
CFMOTO, I preordered with the parts before the bike was released in Australia so was a quick turn around for most of my parts. Also people on the Australian 450mt FB forum are saying that the 15T is good but the stock one with 180 rear tyre is like a 14.5T sprocket.
If you have the opportunity, maybe weigh it to see how heavy it is now. Also, why didn't you drill the two pipes that collect water? It isn't that complicated.
I will go over a weigh bridge one day, it's obviously heavier now than stock but it still doesn't feel heavy. I haven't drilled the holes because the bikes got warranty so it's the dealerships problem to fix under the warranty.
Thanks for the tips. Stand turning up next week and this vid was just in time, cheers.
No worries. Check the comments if anyone has some tips too as the ratchet straps trick is not the only way.
Another banger of a technical install video mate, loving the bush mechanics - not everyone has spring pullers or whatnot, but everyone's got a ratchet strap (or can get one real cheap) so this is the way to go. I'll attach the wire to the two side holes instead of the middle holes, but other than that I'm doing it exactly the same, installing it next weekend.
Nice, don't forget to put it in first gear.
@@outie555 Good tip! btw, wind some velcro tape (about 20cm of it) around your handlebar, so that when you drop your bike, you can use it to tie the front brake which makes lifting it easier :))
Hi, when you install the "Stand Stopper" later, it's match easier to install the spring assy. Tanks for the good ideas.
Thanks for the tip
Thanks for the tips bro..
No worries, good luck with the install.
Hello from France ; are you going to talk about the panniers (Rhinowalk as i can see) later ?
Yes I will when I get some time. Basically very happy with them and they seem great so far. Got them from AliExpress with the extra exhaust side mounting bracket.
Excellent idea Outie, I did that on some other project🇦🇺😂🤣🤘soooo how are u loving the Beast?
Yeah it's a great way to do it. I did try using the rear axle as the tie down point but the angle was wrong so using the shed door post worked a treat.
Loving the bike and it's now very versatile with the panniers.
A spring puller is your friend Outie😉
Absolutely would be!
I’d be interested to know if you got the centre stand kit from your local dealer, or Uncle Wang’s shop? Thank you for the informative vid. 👍 Parts from CF Moto seem to be an issue in the UK at the moment. I couldn’t get a 15 tooth front sprocket from my dealer and eventually got one from Uncles Wang’s.
CFMOTO, I preordered with the parts before the bike was released in Australia so was a quick turn around for most of my parts. Also people on the Australian 450mt FB forum are saying that the 15T is good but the stock one with 180 rear tyre is like a 14.5T sprocket.
Do you recommended this bike ? I am very confused between re 450 , crf rally 300 and mt 450.
I am just planning to take some long rides
Hello when are you going to install the front high Fender?😅
At this stage not planning to. Just need bark busters for now then I'm done installing things and need to go for more rides
How do you find it for mild offroad? Does it get in the way?
I don't even notice it on there.
Thx !!
If you have the opportunity, maybe weigh it to see how heavy it is now.
Also, why didn't you drill the two pipes that collect water? It isn't that complicated.
I will go over a weigh bridge one day, it's obviously heavier now than stock but it still doesn't feel heavy.
I haven't drilled the holes because the bikes got warranty so it's the dealerships problem to fix under the warranty.
哦，糟糕，看来我来迟了。你错过了一个翻译员😂
That's all good. Google translate worked a treat
My bike came with drilled holes!
Nice. I'm getting them drilled on my next service
@@outie555 They did not even bother to paint mine...I am waiting for the genuine central stand and crash bars for 6 months 5 since i have the bike...
audio/video desync
Yeah not sure why but it will do