This video was VERY helpful. I bought a crimpping tool and the compressor because it was recommended to me by more than one person. I never knew what the crimper did, or how it worked. I see it is just a really good back up tool. Thanks for posting!
Yes, you can connect an analog CCTV PTZ camera to a TV using the RCA composite input on the TV. However, you can not connect a CCTV camera to the CATV (cable TV) input. Please take a look at this article for more info. www.cctvcamerapros.com/Connect-CCTV-Camera-to-TV-s/798.htm
Hello - Thanks for this video. What tools and materials are needed to crimp the female BNC connectors to the same RG59 Coaxial cable? For clarification, it would be to crimp a cable that would connect directly to the head of the cable you've demonstrated here.
Jarrod, is your goal to splice together two separate sections of RG59? If so, I would recommend crimping an F-connector on each end of the cable. www.cctvcamerapros.com/F-Connector-RG59-Coax-p/cn-fm84.htm Then connecting the two cables with a double female F-connector. www.cctvcamerapros.com/Double-Female-F-Connector-p/cn-df1.htm You could do the same thing with BNC connectors, however, we have found that when attaching two cables together, F-connectors are more secure than BNC. If you do want to use BNC, attach these BNC crimp ons connectors to each end of the two cables. www.cctvcamerapros.com/CCTV-BNC-Crimp-p/bncmalecrim.htm Then connect the two cables together with this double female BNC. www.cctvcamerapros.com/CCTV-BNC-p/bnc-double-female.htm Whether you use F-connectors or BNC conectors, you use the same two tools. This is the cable cable stripper tool that you need. www.cctvcamerapros.com/CCTV-Cable-Stripper-p/tl-22.htm And this is the crimp-on connector tool. www.cctvcamerapros.com/CCTV-Cable-Crimping-Tool-p/tl-70.htm Please let us know if you have additional questions.
@@cctvcamerapros Thanks for the answer and suggestions. I was actually trying to design a neat wall or patch panel for the coax outputs going back towards the 16 channel DVR that wouldn't have all those lines running directly through a wall box. I found some rg59 female to female keystone jacks and can use a couple of 2-gang, 8 port keystone insert face plates to finish off the wall with a plumbing access panel on top of them to hide all the extra cable from the few lines of premade runs. I'll make up some male to male patch cables to connect from the wall to the DVR. I've got all the power side running into a surface mount 20 port power box with individually fused connections.
You are correct. Nothing is crimped to or soldered to the center conductor when you put ends on the cable. The center conductor is specifically shielded so that nothing is connected to it. The connection is made when you connect the cable to a device or another cable using a BNC, F-Type or other type of connector. The connectors ensure that the center conductor attached the conductor of the other device or cable. I hope this helps.
Hi Thanks for sharing, great video clear and to the point. I have Mini RG59 cabling for the Lorax CCTV system and need to refit the Bnc connectors, is there a crimp kit for that?
Nobody's noticed lack of brass pin to be crimped on end of wire before final assembly? Big mistake, will not property connected to panel BNC connector.
+Ben Mak these are 2 piece crimp-on BNC connectors. I believe that you are referring to installation of 3 piece crimp on BNC connectors which does require that the brass pin be attached. The 2 piece version does not.
Informative video, I just received my RG59 siamese and some crimp connectors. I crimped the connector like you did and soldered on my power leads. (- to - + to +) and when i connect the camera and cable to the DVR the inferred clicks on the screen stays black and then in the lower corner i have a capital P with a red x and no picture.
To troubleshoot cable problems, it's always a good idea to have a spare cable to test with that you 100% know is good. For example, you can use a pre-made cable for testing. www.cctvcamerapros.com/CCTV-Security-Camera-Cables-s/258.htm Do know for sure that the camera is good? If it is not already mounted, you may want to test is somewhere convenient, like a test bench. Last, confirm that your power supply is good. Having an extra power supply os a good idea as well.
I have the same cable but instead of it being a solid center core it's strand copper wire instead and the outer (ground) is strand silver. I have the bnc end so how would I go about repairing it
That cable is not made for CCTV applications. It sounds like a steel-clad cable for CATV, so I would recommend replacing it if you are using for security cameras. It may work OK at short distances with CCTV cameras but is not recommended. As far as how to crimp an end on it, it is probably the same process as you see in this video but I we do not work with that type of cable, so you should probably search for an article of video for that specific cable type to be safe.
That's the cable that came with my Swann 1080p system. but I found a replacement bnc end at a local electronics store and soldered it and now it's working fine.
Crimpon connectors for outdoors use are lousy. They get loose , i have had enough trouble that i gave up on them. On ebay compression tools can be found for 6$ and at 50cents a connector they are pretty cheap. Why waste time with the crimpons. I think you should extend the video to explain the difference between types of connectors and also show how to connect a compression connector.
Navin Shenoy yes, compression connectors are also a good choice. We have a video that shows how to attach compression connectors here, however, the video shows a compression F connector. ua-cam.com/video/E861Xc9Bajs/v-deo.html We also have a blog post with video demonstrations that talks about four different ways to attach BNC connectors to RG59 coax cable. You can find that here. videos.cctvcamerapros.com/surveillance-system-installations/best-bnc-connector.html Thanks for watching and for your comments.
Yeah but what if im currently stuck with connectors far too small for quad wire... Its taking me 10 mins just to smash and twist the wire into the connector
Tony, you should make sure that the connectors you have are the right ones for whatever gauge cable you are using. For example, RG6 and RG59 use different BNC connectors even though the BNC part is the same. Maybe that is the issue?
NO - and if you try, you will seriously weaken the ferrule as well as degrading the strength of the primary crimp. If you're using the cutting tool, use blades properly. 1: slices the insulation to the correct depth to not nick the braid 2: slices through the insulation and braid, and scores the dielectric (and foil if there's foil) 3: Slices through insulation/braid and dielecric but doesn't nick the inner wire. The inner wire is then trimmed to 4-6mm length (deending on the pin) and the pin crimped on. It _must_ sit hard against the dielectric. A proprerly done crimp will not "flex" or pivot and will not pull off. if it does, then you're using the wrong connector for the cable or the wrong crimper for the connector. The connector is then slid onto the assembly until it clicks. It's on properly when a light tug on the connector won't pull it off. Only then is the ferrule slid into place and crimped. if it's tight, push the connector into the ferrule, _never_ pull the ferrule onto the plug (or you'll rip the connector off the end of the cable (putting the plug face on a flat surface works, just _don't_ pull on the cable.). Never redo a crimp or add a second one. This _will_ result in an unreliable connection. Properly done crimps will last for 60+ years.
Ok not to be a jerk. But I am a tech and I install cables and fix computers. Honestly you need to use better tools and cut things better the first time. Doing all that side work was not something that needed to be done. I could make a 2min video and not need to cut one thing also all those tools were not necessary you only needed 3 tools to do it right the first time bud. Hope where ever you work or what your doing you get better training.
+Dylan Eckert thanks for watching and for your candid feedback. There are different types of installation tools and different types of coax cable connectors available to attach a BNC connector to RG59. For some people, this is the method of choice. For others, there are other options that they may prefer: compression connectors, F connectors - then convert to BNC, etc. I can say that this and other methods have been done by CCTV Camera Pros and hundreds of installers that we supply to and the connections have held reliably for a decade and still going strong. We have also used other methods that have held up equally as well. We love freedom and choices. If you make a video on how you do it, please let us know so that we can take a look.
Thank you for noting that. You are correct. If you are using RG59, be sure to get BNC connectors for RG59. The same goes for RG6. These are two different sized connectors made specifically for those cable size.
...yikes. Twist up the shielding wires and trim them right off for starters. You don't need to fold them all back over like that and you certainly don't want them hanging out like wild pubes from sagging pants. Secondly, you didn't even attach the center core, which means the connector body won't click on properly and you'll only get a fraction of the contact surface. And what the f### was that last bit with the razer blade move you're trying to do? What are you some kind of yakuza boss trying to get viewers to chop their fingers off for you? I Could do it with my teeth and the bottom of a stool and still get a cleaner signal and a safer connection. You may as well tell people to run around a pool with scissors.
This video was VERY helpful. I bought a crimpping tool and the compressor because it was recommended to me by more than one person. I never knew what the crimper did, or how it worked. I see it is just a really good back up tool. Thanks for posting!
PS Fanboy thank you for watching. We are so glad that you found it helpful.
Trim the copper braid shorter before you push the ferrel up.
Seriously.
Thanks for a wonderful detailed video, certainly it is helpful for me. and recently i have bought a BNC connector but don't know how to install it.
Great 👍
So could I hook the BNC output from a PTZ camera set to 480p to a coax, and then through the coax to a TV using this method?
Yes, you can connect an analog CCTV PTZ camera to a TV using the RCA composite input on the TV. However, you can not connect a CCTV camera to the CATV (cable TV) input. Please take a look at this article for more info. www.cctvcamerapros.com/Connect-CCTV-Camera-to-TV-s/798.htm
Hello - Thanks for this video. What tools and materials are needed to crimp the female BNC connectors to the same RG59 Coaxial cable? For clarification, it would be to crimp a cable that would connect directly to the head of the cable you've demonstrated here.
Jarrod, is your goal to splice together two separate sections of RG59? If so, I would recommend crimping an F-connector on each end of the cable. www.cctvcamerapros.com/F-Connector-RG59-Coax-p/cn-fm84.htm
Then connecting the two cables with a double female F-connector. www.cctvcamerapros.com/Double-Female-F-Connector-p/cn-df1.htm
You could do the same thing with BNC connectors, however, we have found that when attaching two cables together, F-connectors are more secure than BNC.
If you do want to use BNC, attach these BNC crimp ons connectors to each end of the two cables. www.cctvcamerapros.com/CCTV-BNC-Crimp-p/bncmalecrim.htm
Then connect the two cables together with this double female BNC. www.cctvcamerapros.com/CCTV-BNC-p/bnc-double-female.htm
Whether you use F-connectors or BNC conectors, you use the same two tools.
This is the cable cable stripper tool that you need. www.cctvcamerapros.com/CCTV-Cable-Stripper-p/tl-22.htm
And this is the crimp-on connector tool.
www.cctvcamerapros.com/CCTV-Cable-Crimping-Tool-p/tl-70.htm
Please let us know if you have additional questions.
@@cctvcamerapros Thanks for the answer and suggestions. I was actually trying to design a neat wall or patch panel for the coax outputs going back towards the 16 channel DVR that wouldn't have all those lines running directly through a wall box. I found some rg59 female to female keystone jacks and can use a couple of 2-gang, 8 port keystone insert face plates to finish off the wall with a plumbing access panel on top of them to hide all the extra cable from the few lines of premade runs. I'll make up some male to male patch cables to connect from the wall to the DVR. I've got all the power side running into a surface mount 20 port power box with individually fused connections.
What ensures a good mechanical and electrical connection to the center pin, as it is neither crimped nor soldered to center conductor?
You are correct. Nothing is crimped to or soldered to the center conductor when you put ends on the cable. The center conductor is specifically shielded so that nothing is connected to it. The connection is made when you connect the cable to a device or another cable using a BNC, F-Type or other type of connector. The connectors ensure that the center conductor attached the conductor of the other device or cable. I hope this helps.
Hi Thanks for sharing, great video clear and to the point. I have Mini RG59 cabling for the Lorax CCTV system and need to refit the Bnc connectors, is there a crimp kit for that?
If you are referring to pre-made cable with the ends pre-attached, then no. You can not cut a re-crimp that type of cable.
Nobody's noticed lack of brass pin to be crimped on end of wire before final assembly? Big mistake, will not property connected to panel BNC connector.
+Ben Mak these are 2 piece crimp-on BNC connectors. I believe that you are referring to installation of 3 piece crimp on BNC connectors which does require that the brass pin be attached. The 2 piece version does not.
Informative video,
I just received my RG59 siamese and some crimp connectors.
I crimped the connector like you did and soldered on my power leads. (- to - + to +) and when i connect the camera and cable to the DVR the inferred clicks on the screen stays black and then in the lower corner i have a capital P with a red x and no picture.
To troubleshoot cable problems, it's always a good idea to have a spare cable to test with that you 100% know is good. For example, you can use a pre-made cable for testing. www.cctvcamerapros.com/CCTV-Security-Camera-Cables-s/258.htm
Do know for sure that the camera is good? If it is not already mounted, you may want to test is somewhere convenient, like a test bench.
Last, confirm that your power supply is good. Having an extra power supply os a good idea as well.
I have the same cable but instead of it being a solid center core it's strand copper wire instead and the outer (ground) is strand silver. I have the bnc end so how would I go about repairing it
That cable is not made for CCTV applications. It sounds like a steel-clad cable for CATV, so I would recommend replacing it if you are using for security cameras. It may work OK at short distances with CCTV cameras but is not recommended. As far as how to crimp an end on it, it is probably the same process as you see in this video but I we do not work with that type of cable, so you should probably search for an article of video for that specific cable type to be safe.
That's the cable that came with my Swann 1080p system. but I found a replacement bnc end at a local electronics store and soldered it and now it's working fine.
Crimpon connectors for outdoors use are lousy. They get loose , i have had enough trouble that i gave up on them. On ebay compression tools can be found for 6$ and at 50cents a connector they are pretty cheap. Why waste time with the crimpons.
I think you should extend the video to explain the difference between types of connectors and also show how to connect a compression connector.
Navin Shenoy yes, compression connectors are also a good choice. We have a video that shows how to attach compression connectors here, however, the video shows a compression F connector.
ua-cam.com/video/E861Xc9Bajs/v-deo.html
We also have a blog post with video demonstrations that talks about four different ways to attach BNC connectors to RG59 coax cable. You can find that here.
videos.cctvcamerapros.com/surveillance-system-installations/best-bnc-connector.html
Thanks for watching and for your comments.
CCTV Camera Pros compression connectors
Yeah but what if im currently stuck with connectors far too small for quad wire... Its taking me 10 mins just to smash and twist the wire into the connector
Tony, you should make sure that the connectors you have are the right ones for whatever gauge cable you are using. For example, RG6 and RG59 use different BNC connectors even though the BNC part is the same. Maybe that is the issue?
Is this crimper works also on RCA with RG6?
Thanks
Yes, it works with RG6 and will also work with RCA and other type of crimp-on style connectors.
I used the largest and it looks to big??
Don't you need to crimp the small end of the sleeve also? Rookies like me don't know unless you show us every step...
+Tech Bubba crimping the small end of the BNC connector is not necessary. As long as the main barrel is crimped properly, it will be secure.
NO - and if you try, you will seriously weaken the ferrule as well as degrading the strength of the primary crimp.
If you're using the cutting tool, use blades properly.
1: slices the insulation to the correct depth to not nick the braid
2: slices through the insulation and braid, and scores the dielectric (and foil if there's foil)
3: Slices through insulation/braid and dielecric but doesn't nick the inner wire.
The inner wire is then trimmed to 4-6mm length (deending on the pin) and the pin crimped on. It _must_ sit hard against the dielectric. A proprerly done crimp will not "flex" or pivot and will not pull off. if it does, then you're using the wrong connector for the cable or the wrong crimper for the connector.
The connector is then slid onto the assembly until it clicks. It's on properly when a light tug on the connector won't pull it off.
Only then is the ferrule slid into place and crimped. if it's tight, push the connector into the ferrule, _never_ pull the ferrule onto the plug (or you'll rip the connector off the end of the cable (putting the plug face on a flat surface works, just _don't_ pull on the cable.).
Never redo a crimp or add a second one. This _will_ result in an unreliable connection. Properly done crimps will last for 60+ years.
The only reason I started watching this video is to see how the blades are disengaged and they skip right over that.
Sorry about that.
Ok not to be a jerk. But I am a tech and I install cables and fix computers. Honestly you need to use better tools and cut things better the first time. Doing all that side work was not something that needed to be done. I could make a 2min video and not need to cut one thing also all those tools were not necessary you only needed 3 tools to do it right the first time bud. Hope where ever you work or what your doing you get better training.
+Dylan Eckert thanks for watching and for your candid feedback. There are different types of installation tools and different types of coax cable connectors available to attach a BNC connector to RG59. For some people, this is the method of choice. For others, there are other options that they may prefer: compression connectors, F connectors - then convert to BNC, etc.
I can say that this and other methods have been done by CCTV Camera Pros and hundreds of installers that we supply to and the connections have held reliably for a decade and still going strong. We have also used other methods that have held up equally as well. We love freedom and choices. If you make a video on how you do it, please let us know so that we can take a look.
+Dylan Eckert I look forward to seeing your video!
Very helpful thank you
That is a nice looking job and I would like to have tools to do similar jobs.
Thank you. You can find all of our CCTV installation tools here. www.cctvcamerapros.com/CCTV-Installation-Tools-s/220.htm
thank you for this video i like it .
You crimped the Ferrule's small side off camera then came back and didn't say anything.
Dan Harmon brought me here
you ledt out that you need RG 59 BNC's for RG 59 cable. RG 6 BNC's will be too loose! Why do you leave that out. NEVER ASSUME in tutorials!!!!!
Thank you for noting that. You are correct. If you are using RG59, be sure to get BNC connectors for RG59. The same goes for RG6. These are two different sized connectors made specifically for those cable size.
Don't be entitled. You and I are the viewer and the ones searching/researching. Verify everything yourself. Not everything is spoon fed.
thanks for info
...yikes.
Twist up the shielding wires and trim them right off for starters. You don't need to fold them all back over like that and you certainly don't want them hanging out like wild pubes from sagging pants. Secondly, you didn't even attach the center core, which means the connector body won't click on properly and you'll only get a fraction of the contact surface.
And what the f### was that last bit with the razer blade move you're trying to do? What are you some kind of yakuza boss trying to get viewers to chop their fingers off for you?
I Could do it with my teeth and the bottom of a stool and still get a cleaner signal and a safer connection. You may as well tell people to run around a pool with scissors.
Nin appana shanta boli magne
wrong without pin
alex Dagook : yes but the connector used in this video has a pin built-in.