DIY FeatherBoards PVC

Поділитися
Вставка
  • Опубліковано 25 тра 2017
  • This is my version of a featherboard. I used PVC board that I bought from Lowes. This stuff has a nice elastic feel when cut into feather boards. I think it will hold up for a long time. The fingers are cut to about the same thickness as a full kerf table saw blade. Maybe just a bit thicker. 3/16" at most. The gap or spacing is well 1/8". Size and length very and I'm not sure I will ever find a perfect size.... which is why I decided to make my own. This way I can easily make them as needed in the future.
    This is a basic template I made
    drive.google.c...
    This is the Sketch Up file
    drive.google.c...
    The PVC board I used:
    www.lowes.com/...
    Knobs and T-bolts I used:
    www.rockler.com...
    www.rockler.com...
    www.rockler.com...
    My links:
    www.mitchmakes...
    INSTAGRAM
    / mitch_makes
    UA-cam CHANNEL #1
    / mitchelldeitrich
    UA-cam CHANNEL #2
    / @mitchdeitrich
  • Навчання та стиль

КОМЕНТАРІ • 332

  • @VampireOnline
    @VampireOnline 7 років тому +31

    These honestly look better than the store bought ones!

  • @g.fortin3228
    @g.fortin3228 3 роки тому

    brilliant using PVC. I had been contemplating what type of wood was mildly springy without cracking.. and..now I know pvc works great thanks so much.

  • @danielsolowiej
    @danielsolowiej 7 років тому +1

    I'm sure it will hold out for a long time! You have made a very clean Diy project, which in addition, being white gives a final look very professional and pleasant. Worthy indeed !

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      +Daniel Solowiej thanks Daniel. I personally like white in the shop. Helps brighten things up

  • @tomfrederick6083
    @tomfrederick6083 3 роки тому

    Just found this video. Very informative. Thanks for actual narration and no annoying music.

  • @bulkhead
    @bulkhead 7 років тому +1

    Great idea, one of those things that makes you go "why didn't I think of that?" Killin it with the measurement graphics. I need to learn how to do that.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому +3

      +Jason Brundage thanks man! It's a PNG file with a transparent background set over top the video during the editing process ;)

  • @phillypauly
    @phillypauly 7 років тому +7

    great job! impressive.
    I have been saving a PVC scrap and wasn't sure why - but NOW I know!

  • @houseoffire72
    @houseoffire72 6 років тому

    A $25 pvc board builds MANY feather boards as compared to $25 for one feather board from a store. Excellent idea!!!

  • @MitchellDeitrich
    @MitchellDeitrich  7 років тому

    This is a basic template I made
    drive.google.com/file/d/0B8_FJDOeo4mBS1BWWVFkb3FVLU0/view?usp=sharing
    This is the Sketch Up file I made
    drive.google.com/file/d/0B8_FJDOeo4mBdjRHNjJnWjBNTmc/view?usp=sharing

  • @thegringobaker
    @thegringobaker 3 роки тому

    Just stumbled on this video. I have to say those featherboards look fantastic! I have made them out of wood before and have never been happy with them. I'll be buying some PVC board!

  • @RobDucharme
    @RobDucharme 2 роки тому

    Looked up "how to make a featherboard" and yours was one of the first to come up. I was hoping for plastic over wood as well...
    This is a win. And a sub.

  • @policedog4030
    @policedog4030 6 років тому +4

    Oops, I clicked the "like" button for this but apparently must have forgotten I already had clicked it months ago and youtube "un-liked" the video..I fixed it back now though.. Thanks for taking all the trouble to show your measurements and techniques; so much easier to follow what you did; I'm headed to the lumberyard for some of that PVC, good idea.

  • @jeffhallford5284
    @jeffhallford5284 4 роки тому

    I have a feather board that the first feather is slightly shorter that the rest. You can use that for consistent set up. I've set mine too tight and it can make things more dangerous.
    Great idea with the PVC material. Thanks for sharing.

  • @halkester9368
    @halkester9368 7 років тому +5

    Hals Wood Shop. Very Nice Jig. You made and drew the angles and did it. What bothers me is not you but the comments that need your pdf and cannot rewatch you and must have some drawing like it is magic !!! Isn't what you did the main idea, get out and make it ! Use a plastic safe material and draw the lines and have some fun safely. Oh make some handles, a few pennies and nuts and bolts, omg.. people have done it for years and they work great. PVC cutting boards are not being used in the kitchen they make great shop material...jigs, and push sticks, handles. As I said you did great. Some others need to rewatch it and have a coffee and get out in their shop and make it without your pdf.

    • @barryroberts6470
      @barryroberts6470 7 років тому

      Hal i hope your comment is not referring to me? I like to keep PDF Plans for reference in case i have forgotten anything, plus i don't want to take my Laptop into a shed where dust and stuff can ruin it. Does everything that you make yourself come out of your head? do you read books? I have seen this same way to make a feather board before on UA-cam, and as i am a subscriber of his i thought i would ask if he was doing any Plans. Thanks.
      Barry (ENG)

    • @halkester9368
      @halkester9368 7 років тому

      Barry Roberts . thanks. but not about your pdf. you gave such good detail they should be able to draw it and write it and make it. i have lots of books and magazines and check utube also for ideas. free education is so nice.

    • @barryroberts6470
      @barryroberts6470 7 років тому

      Hal thanks for the reply back, apologies if my comment sounded bad it's just that some people on here give you comments and abuse that is just not needed. Thanks.

    • @MrThom52
      @MrThom52 7 років тому

      Barry Roberts a

    • @barryroberts6470
      @barryroberts6470 7 років тому

      MrThomas52 - What was your comment?

  • @cleokey
    @cleokey 6 років тому +1

    I have never seen this material before. You did a great job in the fabrication. The boards appear to work perfectly. Thanks.

    • @MitchellDeitrich
      @MitchellDeitrich  6 років тому

      +Alan Pinho they are taking abuse very well ;) thanks

  • @andrewbieger5004
    @andrewbieger5004 6 років тому +6

    Just subbed your channel. You have a very clever build. The design totally beats using wood, as the PVC material is consistent throughout the whole board. This means no knots or funky wood grain which might move differently and give inconsistent pressure on the work piece. It is also immune to movement/warping/ swelling from heat and humidity.
    I am a general contractor in South Florida and we use this type of product for tons of exterior trim projects for the reasons I just mentioned. With proper paint prep, it also takes paint very well.
    The only potential issues I can see (one mentioned in another comment) is setting up the feather boards so they stop just shy of the rear edge of the blade. Anything behind that can create a bind and kickback. The second item is not using push blocks or push sticks to run the material through the router table. I like the thin plywood design (John Heinz inspired), which also serves as a hold down when working on narrow work pieces, where you cant use a hold down and a push block..
    For many edge treatments and partial groove cuts, etc., you cannot see the actual bit. It is REAL easy to get complacent and push too far and get a nice router profile carved into your finger tips. That is BAD, unless you are going for that Look!!! My good buddy is missing tips of two fingers, and I don't want anyone to witness that.
    AS for the pdf plans, I highly encourage you to practice on sketchup or other means to make some simple drawings of everything you produce. Many of us woodworkers appreciate the vast time and effort producing these videos, and have purchased plans for some projects. We all benefit from you designs and you should get a few bucks for them. With the current YT policies, you are damned lucky to get paid for advertising I have bought enough plans on YT to keep me busy for six months.

  • @HBFC09
    @HBFC09 2 роки тому

    I made a bunch of these this weekend. I was so impressed I e some for my uncle too. Great video. Thanks for sharing.

  • @stevedockery3534
    @stevedockery3534 Рік тому

    Great idea Mitch. I will be making one for both my router table & table saw. Thanks very much

  • @dawsie
    @dawsie 7 років тому

    Now this was worth the time I spent watching, they are so much better than wooden feather boards I am going to see where I can get me a length of PVC board to make my own as I have tried making them out of plywood as plain timber just did not work at all. Thanks for taking the time to share this 😺😺😺😺

  • @dekurvajo
    @dekurvajo 6 років тому

    You deserve a subscribe indeed. Thank you. I was exactly thinking about to make these kind of jigs out of PVC or any other material rather than plywood. There are lot of junk actually around a household which are absolutely suits for this. Not because the plywood would be more expensive, but the invested time and work does. And i think permanent jigs are just does not really feels good to me out of plywood.

  • @jonbishop1385
    @jonbishop1385 7 років тому +2

    Best on UA-cam to date ! Great Job Mitch of the making of the featherboard and the filming of this video

  • @labsquadmedia176
    @labsquadmedia176 4 роки тому

    That jig is brilliant. Thanks for sharing.

  • @aimeeeckman1
    @aimeeeckman1 6 років тому

    Probably one of the best DIY videos I've seen:) If this guy isn't a teacher, he should be!!

  • @RobbBirch
    @RobbBirch 7 років тому +3

    I expected to read the usual “pvc is deadly” comments 1,000 times…anyway, great job brother!

  • @rwind656
    @rwind656 4 роки тому

    I have a bunch of similar PVC scraps! Thanks for the ideas. Will check if it fits into our miter slots. And we really need featherboards!

  • @JunkPileOMatic
    @JunkPileOMatic 7 років тому +1

    awesome. I never see anyone using fingerboards anymore. a great tool to use and have.Now I have a use for that PVC board I find in the dumpster all the time.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому +1

      +Junk Pile O Matic lol thanks! Just trying to be safer. We'll see if I can remember to use them wen needed;)

    • @JunkPileOMatic
      @JunkPileOMatic 7 років тому +1

      always be safer. inspiration does get in the way of safty sometimes .but, safty always leaves more time for inspiration. (I wasn't trying to be philosophical ,it just happens sometimes lol.

  • @jayross6588
    @jayross6588 6 років тому

    Coolest shopmade featherboards hands down

  • @bernym4047
    @bernym4047 6 років тому

    Very well produced vid. Thanks. The best cutting jig/sled I have seen.

  • @FishersShop
    @FishersShop 7 років тому +5

    Wow very nice! Gonna have to keep an eye out for those PVC boards next time I'm at the big box store.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      Thank you! I was actually surprised I found something close to what I was looking for at the big box store for once ;)

  • @LiloUkulele
    @LiloUkulele 4 роки тому

    Great Job!. I quit using wood runners for my sleds and switched to UHMW PLASTIC (Ultra-high-molecular-weight polyethylene). A pair of precut runners are $30+, which is ridiculous. My local plastics store sells cutoffs by the pound. I bought a piece for under $2 and made 3 pair of runners with left overs....I will definitely be making some feather boards from the left overs....PS: UHMW is self lubricating and feature a low coefficient of friction...THANKS FOR AN INSPIRATIONAL VIDEO!

  • @sagguharjit88
    @sagguharjit88 4 роки тому

    Very much unique and you taught very well that how to make them, almost every detail.

  • @hyselwatchandclockrepair1874
    @hyselwatchandclockrepair1874 4 роки тому

    Awesome video! Thanks so very much! I am recovering from getting the tips of fingers nicked, definite wake up call. Making these finger boards now. Thanks again for clear instructions!

  • @Woodified
    @Woodified 7 років тому

    I like this idea. Thanks for sharing Mitch.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      +Woodified you welcome and thanks for watching:)

  • @zulkarnainshinn2307
    @zulkarnainshinn2307 Рік тому

    Thanks. This idea will save me a lot of money.

  • @shaweehillsworkshop4226
    @shaweehillsworkshop4226 7 років тому

    Just found your channel from a comment on vintage wood workshop's shed tour. Great Job man, you definitely got a subscriber in me!

  • @MichaelLawing
    @MichaelLawing 7 років тому +1

    Awesome project, Mitch! They look better than a lot of the production models I've been looking at!

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      Thanks Michael. I was gonna buy a few but seemed like to have a variety, one has to spend a small fortune. Like clamps I guess.

  • @GregoryBeckmanMHAF
    @GregoryBeckmanMHAF 7 років тому

    really cool idea and project. now I need to go to the store again.

  • @Shoerona
    @Shoerona 7 років тому

    They turned out great, Mitch! Looks like that PVC was a good choice.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      +Make With Dad Thanks! Yeah I'm pretty happy with them. Haven't used them much but I think they will hold up well.

  • @sassygil6675
    @sassygil6675 5 років тому

    I've purchased PVC board for runners and this will be the second project.
    Great video. Thank you!
    Just subscribed!

  • @heyimamaker
    @heyimamaker 6 років тому

    Those look much better than the cheap plastic ones in the store!

  • @mmgross144
    @mmgross144 7 років тому +1

    I LIKE IT! You have a new subscriber in me. Nice ingenuity! Just a note, on my old Bench Dog featherboards, the first time is slightly shorter than the rest, which I used to index to the work-piece when I set them up. This ensures proper tension. Keep up the great work!

  • @stephenater9687
    @stephenater9687 7 років тому

    New subscriber and a novice ww but an old man. I have used pvc for sled rails on a used (old) sears router table which I used Gorilla const. adhesive to attach to the table and then built a sled with slides to match the rails...glides real well. Just bought a piece to make runners for a crate of vinyl lps but it is not a slick as the earlier AZEK. Slick is needed. Make sure you get the kind that is textured on one side. Great vid. and great design. Thanks!

  • @danthemakerman
    @danthemakerman 7 років тому

    This is a cool idea man. Way to think out of the box.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      Thanks Dan. Figure most people make them out of wood or buy them made of plastic....lol

  • @robsplaylist
    @robsplaylist 6 років тому

    Thanks for the video! I made the same basic jig using an L bracket screwed into the support and cut mine out of MDF because I had it laying around. Works great!

  • @nesleyheiney3111
    @nesleyheiney3111 7 років тому

    Great idea I have tons of that stuff for work. Also those bits are amazing I had to get a few when I was making shutters I made 28 shutters and that bit was a life saver. Thanks for the idea.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому +2

      Thanks! I stumbled on it at the hardware store and had to try it. Glad I did. I also see they make a thinner version too. Yes those bits are a life saver! That straight cut bit scared the crap out of me when it jerked one out of my hand as soon as I hit start on the router. Was my fault but made me a bit gun shy....

    • @nesleyheiney3111
      @nesleyheiney3111 7 років тому

      Yep lol I broke two straight bits before I decided to switch over and it was well worth it

  • @ldwithrow08
    @ldwithrow08 7 років тому

    Always wanted to make my own featherboards but never could get the wooden ones to last any time. Never thought of using PVC trim material. I'm going to pick up a scrap of it and give it a try.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      Yeah dude I'm really glad I gave it a go. I was looking for hard plastic and found this stuff!

    • @ldwithrow08
      @ldwithrow08 7 років тому +1

      Went to Lowe's when the social security came in this month. Got an 8 foot piece of 3/4" x 5 1/2" piece of PVC. Made 4 of the tall feather boards and 4 of the low wide ones. Enough to hang a couple on every machine likely to need them. Cost $20 for the board and took about an hour. And I've still got a couple of feet of PVC left. I'm not making a video or anything so I eyeballed the thickness of the feathers and knocked out the slots on the scroll saw and they work great. Try buying them for $2.50 each. Thanks for the idea.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      +Lawrence Withrow Awesome!!!!

  • @chadpersing5596
    @chadpersing5596 7 років тому

    I got a stack of this trim material and it never dawned on me to use for such things..lol awesome idea! Thanks and subbed!

  • @ManCrafting
    @ManCrafting 7 років тому

    Great little project. Apparently I'm not the only one who thinks so. Great seeing this video getting so much attention bud.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      +ManCraftingTM thanks. Yeah it's kinda nice getting so much positive feedback on a project.

  • @claytonrealist8868
    @claytonrealist8868 6 років тому

    Good video and the easiest way to make them I have seen.

  • @Cesco828
    @Cesco828 3 роки тому

    Hey Mitch great jig thanks a lot for sharing

  • @pmcmva
    @pmcmva 7 років тому +13

    Nice project. First time to your channel. I was thinking about using PVC board for my new set of feather sticks for the table saw. I've never used them before. Want to know why I'm going to now? Because two months ago I put my fingers on a piece of stock "out behind the blade" JUST LIKE YOU DO in this video at around 6:35, the work piece kicked back, and dragged my hand back over the blade. Never saw it coming. ER, stitches, chipped bone in the tip of two fingers, nail beds destroyed, scars and messed up sensation in those fingers. Miracle I've still got ten remaining.
    The "back" of the blade on a table saw is NOT the safe zone. Watching you do it gave me the jeebies. I just want to give you a shoutout and a word of warning to all your viewers....
    I've subbed your channel. I like your style. But PLEASE, use a push stick, and use those nice feather sticks in front of AND BEHIND the cut. Keep your left hand just.... the heck away.
    (Jimmy Diresta had a similar accident.)

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому +2

      +Paul Wow Paul I can only say Thank you for the advice! I have had a couple kick backs on the table saw and yes I'm young and dumb. I use a lot of pine that should not be cut on a table saw. It is warped and I continue to do so. Honestly lately I have been gun shy of the table saw and router table. I like having my fingers.. A LOT. The shot you are referring to is me being more concerned about view angle and not my safety. I never considered that. Thank you again!!

    • @ldwithrow08
      @ldwithrow08 7 років тому +1

      I fed my right little fingertip into a table saw twice. Lucky I still have it but the nail looks really gross. Featherboards go a long way to making a radial arm saw a lot safer too.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      +Lawrence Withrow man sorry to hear that. This is the stuff that truly is good to know yet awful to hear about.

    • @ldwithrow08
      @ldwithrow08 7 років тому

      That's nothing. Almost sixty years ago I had a Jr. High shop teacher who went by the nickname "Stumpy". Really made us kids think about safety.

    • @ldwithrow08
      @ldwithrow08 7 років тому +1

      Paul: When I have to rip low grade pine on the table saw or radial arm saw I keep a few shim wedges like you use to align door jambs by the saw. I insert one in the cut as it comes out of the blade, just deep enough to maintain cut width. Putting one every foot or so will let you rip a really long piece without pinching and kickback. I use a lot of cull lumber and this has always worked well for me. Between that and a couple of feather boards, it's a lot safer.

  • @SteveFrenchWoodNStuff
    @SteveFrenchWoodNStuff 6 років тому

    Great stuff, Mitch. Thanks for the construction tips.

  • @JimmiePorterAtStuartArts
    @JimmiePorterAtStuartArts 7 років тому

    A nice design and a great result. I need to make these!

  • @danamoose1234
    @danamoose1234 7 років тому

    Nice end product, looks like a fun project!

  • @Yourtrashmytreasure
    @Yourtrashmytreasure 7 років тому

    Mitch you're a genius. I would buy those👍🏻👍🏻👍🏻👍🏻👍🏻

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому +1

      +Your trash my treasure Thanks Lou! But no need to stroke​ my ego.....lol. my #2 gets a big head about comments like that.

  • @seanm9554
    @seanm9554 7 років тому

    Great job Mitch, I will be making some of those myself! And thanks for the heads up on the PVC boards, I have never seen those. I can see them coming in handy quite often.

  • @paulbuckeljr8870
    @paulbuckeljr8870 7 років тому

    Really​ nice! I have an oddball table saw and I was struggling with making a custom feather board. This is great, subscribed!

  • @JWAM
    @JWAM 7 років тому

    Excellent! Really pro-looking feather boards right there! Fantastic! :)

  • @ephraimvivian1
    @ephraimvivian1 6 років тому

    Its excellent material got make couple them feather boards great video

  • @tonybp965
    @tonybp965 7 років тому

    Fantastic editing Mitch. Love your work. You're a fun dude, and make these vids very interesting. I will certainly be making these myself. Thanks for sharing.

  • @kryptik0
    @kryptik0 3 роки тому

    The jig is a nice adaptation from box joint jigs.

  • @eventosdeanimacionhenrydia8809
    @eventosdeanimacionhenrydia8809 2 роки тому

    Son exelentes, me encantaron Gracias Amigo por tu vídeo saludos cordiales de Cancún Quintana Roo México 🇲🇽 bendiciones..

  • @gsh319
    @gsh319 6 років тому

    That was a great job and video. Real nice work.

  • @DesertBumWoodWorkn
    @DesertBumWoodWorkn 7 років тому

    Cool design on the longer one Mitch!

  • @anthonychavez3742
    @anthonychavez3742 Рік тому

    Great idea thank you for sharing

  • @Crooks103
    @Crooks103 5 років тому

    Excellent piece of gear, nice one

  • @bladder1010
    @bladder1010 10 місяців тому

    Oh, this is great. I'm going to try this.

  • @catchetharris7978
    @catchetharris7978 5 років тому

    Cool. I agree with you. Also believe they are better than board.

  • @VintageWoodWorkshop
    @VintageWoodWorkshop 7 років тому

    awesome job, Mitch!👍👍very helpful.... time to try making some of these!

  • @giovannisanfilippo4842
    @giovannisanfilippo4842 7 років тому

    Brilliant! Never heard of that plank product.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      +Giovanni Sanfilippo thank you! honestly I bad not either untill I stumbled on it at Lowes.

  • @timmeyer3659
    @timmeyer3659 7 років тому

    Definitely going to make me a few of these. Thanks for the idea.

  • @burtreynolds3143
    @burtreynolds3143 2 роки тому

    very nice idea

  • @Pooya-kyani
    @Pooya-kyani 4 роки тому

    that was very cool, clean and beautiful 👍

  • @Mrfreezeee1
    @Mrfreezeee1 7 років тому

    Very good ideal you ve got there compared to the prices they charge for plastic feather board for that i say thumbs up !

  • @HeathKnuckles_Tasty_Timber
    @HeathKnuckles_Tasty_Timber 7 років тому

    Awesome work Mitch! Those will come in handy for sure! 🤘👌

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      I think so too. So many times I need another set of hands. Thanks Heath!

  • @ChappysGarage
    @ChappysGarage 5 років тому +1

    I like it. How has the PVC held up over time? My only concern is PVC trim boards are not really strong when the are cut thin like the fingers. They holding up well? Even if they don't last forever I suppose as long as you have the jig you can make more!

  • @BronkBuilt
    @BronkBuilt 7 років тому

    Functional and look nice as well.

  • @exportedafrican
    @exportedafrican 7 років тому +1

    I must have thrown out tons off cuts lately. Won't happen again! Thanks for the tip

  • @rhshel
    @rhshel 7 років тому +3

    a wonderful video and a great piece or use of that material. I'm checking out Lowes, and they are proud to give you a 10% military discount for VETS.

  • @ginoasci2876
    @ginoasci2876 7 років тому

    you must be friends with Frank Makes.
    i like those pvc feather boards, they look cool and work great.
    it's nice to just push and pull the work piece without worrying about keeping it against the fence. i think ill make one or two. nice job.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      Oh man Frank Howarth is so cool! I realized after the fact he uses the Makes on his name like some others.... Really tho he is in a league of his own! (Frank is amazing at stop motion work).
      Yes, I'm supper happy with this pvc stuff for fearherboards thanks for watching Gino! ;)

  • @sgsax
    @sgsax 7 років тому

    This is an awesome idea. And now I'm subscribed.

  • @FranksDIY
    @FranksDIY 6 років тому

    Great job and they look good too

  • @opasworkshop8373
    @opasworkshop8373 7 років тому +1

    way to go Mitch I like your train of thought on this one hell if you went out and bought a feather board it would cost you more probably than that whole Board of PVC Did. Nice job brother!

  • @PCPAyLOAD
    @PCPAyLOAD 2 роки тому

    I have that same el cheapo Task Force tape measure. Think it was a few dollars and has outlasted several that were 3x the price!

  • @donfillenworth1721
    @donfillenworth1721 6 років тому +1

    Great idea! Thanks for sharing

  • @geeznogoodname
    @geeznogoodname 7 років тому

    SWEET! Makes me want to do up several and give them away as gifts! Of course I would make some for me as well! :) Thanks!

  • @MarcelDiane
    @MarcelDiane 7 років тому

    Dan Brent told me to watch this video.
    I'm glad I listened.

  • @reddog907
    @reddog907 7 років тому

    Super nice project, Thanks.

  • @timluther3632
    @timluther3632 7 років тому +1

    Well done. If you have a local sign shop of any real size... stop by with a dozen doughnuts for the prod mgr and ask what they do with their Sintra scraps. ( referred to as expanded pvc)
    Common thicknesses are 3,6, 12, 24mm 1/8,1/4,1/2,3/4,1"
    Basically no $ benefit in recycling anymore, so any they don't have to pay to dispose of is a plus to them. Great for making shields, dust ports, blast gates , etc. And of course signs lol
    We buy it by the skid 8 & 10' long.

  • @jrfun4647
    @jrfun4647 7 років тому

    another great video-informationaL-how to all in one, thank you!

  • @mfwoodshop
    @mfwoodshop 7 років тому

    Great idea, I'll be doing this one

  • @stephandallons3282
    @stephandallons3282 7 років тому

    Looks great ! It seems to be easy to work on that material.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      thank you! yes cuts like butter ;) well maybe cold butter...

  • @summerswoodworking
    @summerswoodworking 7 років тому

    Heck yeah man! what a great idea!!! loved the ending!

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому +1

      Hey man! Thanks & thanks for stopping by and checking it out

  • @Yahoomediaclub
    @Yahoomediaclub 6 років тому

    Really Love the boards, ⭐️⭐️⭐️⭐️⭐️

  • @molliesdad4702
    @molliesdad4702 6 років тому +1

    Impressive!! I think I will head to Lowes and make a purchase. Any possibility of sharing your "jig" design?? I am curious about what appears to be a metal piece set at 30 degrees? How did you fasten it to the jig, etc?? Would appreciate knowing. Thanks and keep the vid's coming.

    • @KySilverfish
      @KySilverfish 4 роки тому

      Molliesdad Dad - He made it out of a piece of aluminum and used epoxy to hold it in place.

  • @WoodenCreationz
    @WoodenCreationz 7 років тому

    Very cool Mitch!!

  • @neilyeag
    @neilyeag 7 років тому

    They look great!

  • @amirmaroof8604
    @amirmaroof8604 6 років тому

    Amazing job

  • @MrWojpen
    @MrWojpen 2 роки тому

    Good job - Thx Mate😁🙋👏👌

  • @beehappywoodworkingandhone439
    @beehappywoodworkingandhone439 7 років тому

    well done. would make some great push sticks to go with the feather boards. gust a idea. because I saw where you siad you still wanted to get inthere with your hands to push the test board thru.

    • @MitchellDeitrich
      @MitchellDeitrich  7 років тому

      thats a great idea! they make this stuff in a thinner version as well might have to keep that in mind!

  • @Yahoomediaclub
    @Yahoomediaclub 6 років тому +1

    Great work ⭐️⭐️⭐️⭐️⭐️