MY RECOMMENDED TOOLS- 1.BLUETOOTH SCANNER-amzn.to/2Y52H6P 2.OK SCAN TOOL-amzn.to/2W3qIJu 3.GREAT SCANNER ALL SYSTEMS-amzn.to/2OaAjeN 4.IMPACT GUN-amzn.to/2Oa2aMi 5.BATTERY JUMP START TOOL-amzn.to/2Fa5dQt 6-PROFESSIONAL SCAN TOOL-amzn.to/2W1bFQo 7-SOCKET SET GREAT PRICE-amzn.to/2THQxCk 8-WRATCHET WRENCH SET-amzn.to/2FdnVGM LINK TO MY AMAZON STORE www.amazon.com/shop/influencer-d0aff233?ref=ac_inf_hm_vp link to replace spark plugs and ignition coil replacement-ua-cam.com/video/BL1jN1dFhCc/v-deo.html link to clean throttlebody-ua-cam.com/video/QIdCDwey4x4/v-deo.html LINK TO BUY MERCH SUPPORT THE CHANNEL-teespring.com/stores/nyc-mods-forever LINK TO BUY SCANNER-www.amazon.com/dp/B07CSMJJK9/?ref=exp_influencer-d0aff233_lv_dp_vv_mw subscribe to my channel HIT THE SUBSCRIBE BUTTON-ua-cam.com/users/fabolousg4everabout?view_as=subscriber subscribe to my instagram-instagram.com/fabolousg4ever/ subscribe to my facebook-facebook.com/profile.php?id=100015510723364 subscribe to my twitter-mobile.twitter.com/infamousg4ever/tweets DON'T FORGET TO LIKE SHARE AND SUBSCRIBE Fabolousg4ever is a participant in the Amazon Influencer Program.
@@fabolousg4ever thanks for the fast supply. Ok so my idle surges when i turn on my a.c.. I thought it was the iacv but just learned that doesnt exist on my car. Any ideas what else it can be? Its an 05 tl engine in an 03 accord
Good job on suggesting using a cloth instead of spraying cleaner straight into the TB. The pivot points for the throttle plate on Honda/Acura throttle bodies are factory lubricated with a special moly lube that tends to gets washed out if directly sprayed with cleaner. Also, if you need to clean it a lot, that means you are getting a lot of blowby past your piston rings.
Sounds like my issue now. My 2010 has oil inside the plenum. I removed the throttle body to clean from the inside and it was black. It was dry but black. I will dona compression test to check it. It’s at 160k now. 👊
Hey, this is the best video that I’ve seen on this! But I have a dumb question. Am I not supposed to disconnect the battery before I do this? If i disconnect the battery, the butterfly wouldn’t be affected by pushing down the pedal, right? Is it unsafe to leave the battery connected? Thanks!
Do not disconnect the battery then when someone presses on the gas pedal the throttle will not open it is fine with the battery connected just follow the video and you are good to go.
i just came here to see if i did anything wrong but i didn't and my butterfly didn't open, i have a 2010 nissan altima and i slapped my forehead when you said it tends to happen in nissans, i however accidentally moved the butterfly with my finger and all hell broke lose, it's idling at 1500 and it tends to lose power and the gas pedal doesn't work sometimes even if the pedal is to the metal. i tried to factory restore it but it's also not working. i will give it a last shot tomorrow morning when the engine is cold but if not most probably i would need a new throttle body.
Never ooen the throttle by hand very dangerous and nissans and Infiniti you need a scan tool to rest the idle someone with a scan tool that can relearn the idle very common issue after cleaning the throttle body on a nissan I don't touch those throttles unless I have a scan too to rlearn which I do now but didn't have before.
Good video dude , i have a question i did everything you did but when i hit the start button to open the throttle body on order to clean it inside it *wont open* why?
My butterfly doesn't open when car is in the on position and the pedal is pushed, can I just disconnect the wiring harness to the throttle position sensor and manually open the butterfly?
Thanks for your videos. Its helped me save money. I have a 05 tl and my clutch stayed down. I can put it in gear when its off but not when its on. What do you think is the problem and is it something i can fix myself. Thanks
Hey man I have an 06 TL and when you put it in gear it has a low idle (about 500 rpms) and itll will occasionally stutter like it's going to stall. When the car is in park or neutral the rpm is fine... around 900 rpms. Once you accelerate everything feels normal as well. It shifts smooth and the power is there. Then when you stop for a red light or stop sign you'll see the rpms go back down to 500. Do you think cleaning the throttle body would help? Someone told me to try and clean out the intake air control valve as well but it looks like you have to take off the throttle body to access that valve.
Clean the intake manifold and throttle body and then report back to me I have videos up showing how to do both of you have any more questions just ask.
I have a question I have a 2002 Acura CL type S and my traction control throttle body I want to delete it. I understand by doing so my lights on the dashboard will come on but I can pull the fuses and the lights behind the dashboard not a problem, the question I have is, how do I block off the hoses to the cooling manifold? is there a special hose that blockst off the coolant?
How difficult is the TB unit to remove? I had an 05 Pontiac Vibe with the 1.8L 1ZZ engine and the throttle body was 4 simple bolts, (plus the coolant lines but I bypassed those). I used to remove the TB completely and that made it really easy to clean the butterfly and the ring that would build up around the butterfly bore. Then I could even clean further into the intake. Had a simple gasket that I would replace each time. I would rather remove the whole TB unit to clean if it wasn't too difficult.
my compliance bushings are shot, I was thinking of changing the whole LCA on both sides... I was looking into aftermarket. The OEM are 350.00 a pop. You have any knowledge of pros or cons of aftermarket arms? I was looking at Mevotech supers.
I like your video, I have 2011Acura mdx which starts and dies off, I am going to do some clean up this morning. But hey I didn't like your breathing pattern, try and get check up your BP, O2, and stuff. This is coming from a nurse . Thx
tico1983 Maybe..sometimes nothing happens..but other times your car will have a 3000 rpm idle, or limp low power mode. You need a high end scan tool ,that can do a throttle body relearn
This the tipe of vídeo and perfect one that I was looking for to do the right cleaning to my electric tboddy thanks dude for share this great video,, by the way I did it as you just did to your car I also fallow all the procedures as you and when I started the car have some message on the MID shown check vas check trailer sistema check admissions sistem and more so I don’t know if this is harmful for the car please some advise thank you,,
I installed a $60 intake into my 08 TL back in February and my engine light turned on so I drove like that until I saw this video and cleaned my TB but now my VSA light is now on too. ALSO WHEN I STEP ON THE GAS MY CAR SHAKES!!! Any help???
Your aftermarket air filter probably made the MAF sensor dirty from the oil they pre treat them with. I know that is a common issue with k and n at least.
If I've never done this before, should I remove the throttle body in order to clean the back side of the throttle body more thoroughly? Car's got over 100k miles on it.
No you don't have to you can clean the plate on both sides when the valve is open the last thing u need to do is to take the throttle body off and then cause a leak or some other problem when putting it back on.
Please my man I have a problem with my 2004 TL. It consumes too much fuel though I do more of City drive but I know it consumes just too much. Then for over a year now my VSA and Brake dash light won't go off. Please help me? What can I do?
DeFUN studio u have low brake fluid in your revoir that's why those lights are on and to save gas do a tuneup on your car and change the pcv valve make sure you have proper air in your tires and make sure that throttle body is clean
@@mileschavez-friedman8401 your BRAKE CALIPERS MAY BE JAMMED... Rusted caliper bores or SLIDE PINS need LUBE simple test us lift car see if all 4 wheels can spin effortlessly by hand... look at rotor aspects for signs of high heat
Hey man my car when the ac is on and the fans turn on the rpms goes up too 1100 and it feels weird, dont know whats the problem ☹, i recently did a trottle body cleaning, radiator flush and spark plugs
BTW, DO NOT manually push that throttle plate valve with a tool or a your fingers, you can easily damage the throttle plate motor gears, and your buying a new Throttle body unit.
I messed up my throttle body on my Honda. I took it off and cleaned it. Once I had it removed. I moved the throttle plate with my hands to clean the back side. Once I put it back on. My idle was all over the place. So I will just leave it installed and clean like you did. DO NOT MOVE THE THROTTLE PLATE WITH FINGER.
Imagine if the person lets go of the gas pedal whilst you're working on it, you could cause injury to your fingers or damage the unit. Use a brick and wedge it in there.
MY RECOMMENDED TOOLS-
1.BLUETOOTH SCANNER-amzn.to/2Y52H6P
2.OK SCAN TOOL-amzn.to/2W3qIJu
3.GREAT SCANNER ALL SYSTEMS-amzn.to/2OaAjeN
4.IMPACT GUN-amzn.to/2Oa2aMi
5.BATTERY JUMP START TOOL-amzn.to/2Fa5dQt
6-PROFESSIONAL SCAN TOOL-amzn.to/2W1bFQo
7-SOCKET SET GREAT PRICE-amzn.to/2THQxCk
8-WRATCHET WRENCH SET-amzn.to/2FdnVGM
LINK TO MY AMAZON STORE www.amazon.com/shop/influencer-d0aff233?ref=ac_inf_hm_vp
link to replace spark plugs and ignition coil replacement-ua-cam.com/video/BL1jN1dFhCc/v-deo.html
link to clean throttlebody-ua-cam.com/video/QIdCDwey4x4/v-deo.html
LINK TO BUY MERCH SUPPORT THE CHANNEL-teespring.com/stores/nyc-mods-forever
LINK TO BUY SCANNER-www.amazon.com/dp/B07CSMJJK9/?ref=exp_influencer-d0aff233_lv_dp_vv_mw
subscribe to my channel HIT THE SUBSCRIBE BUTTON-ua-cam.com/users/fabolousg4everabout?view_as=subscriber
subscribe to my
instagram-instagram.com/fabolousg4ever/
subscribe to my facebook-facebook.com/profile.php?id=100015510723364
subscribe to my twitter-mobile.twitter.com/infamousg4ever/tweets
DON'T FORGET TO LIKE SHARE AND SUBSCRIBE
Fabolousg4ever is a participant in the Amazon Influencer Program.
Why is there coolant lines to the tb if there isn't an iacv since the dbw deletes it
it heats up the throttle body to stop it from freezeing up
@@fabolousg4ever thanks for the fast supply. Ok so my idle surges when i turn on my a.c.. I thought it was the iacv but just learned that doesnt exist on my car. Any ideas what else it can be? Its an 05 tl engine in an 03 accord
idle could be anything does it have tl alternator or accord parts might need more voltage who knows the swap somthing isnt right .
9-Daughter
Good job on suggesting using a cloth instead of spraying cleaner straight into the TB. The pivot points for the throttle plate on Honda/Acura throttle bodies are factory lubricated with a special moly lube that tends to gets washed out if directly sprayed with cleaner. Also, if you need to clean it a lot, that means you are getting a lot of blowby past your piston rings.
Sounds like my issue now. My 2010 has oil inside the plenum. I removed the throttle body to clean from the inside and it was black. It was dry but black. I will dona compression test to check it. It’s at 160k now. 👊
Found a use for my daughter.
Thanks for this trick! Didnt know an electronic T.B. would work still with just key on.
Yup
Doin this and my spark plugs fri. My tl hesitates bad when i accelerate. Drives me nuts. Great vid.
Thanks
at what speed ???
Hey, this is the best video that I’ve seen on this! But I have a dumb question. Am I not supposed to disconnect the battery before I do this? If i disconnect the battery, the butterfly wouldn’t be affected by pushing down the pedal, right? Is it unsafe to leave the battery connected? Thanks!
Do not disconnect the battery then when someone presses on the gas pedal the throttle will not open it is fine with the battery connected just follow the video and you are good to go.
fabolousg4ever thank you! I did it today, and it made a big difference.
Oh ok good glad it worked if you have any questions feel free to ask .
i just came here to see if i did anything wrong but i didn't and my butterfly didn't open, i have a 2010 nissan altima and i slapped my forehead when you said it tends to happen in nissans, i however accidentally moved the butterfly with my finger and all hell broke lose, it's idling at 1500 and it tends to lose power and the gas pedal doesn't work sometimes even if the pedal is to the metal. i tried to factory restore it but it's also not working. i will give it a last shot tomorrow morning when the engine is cold but if not most probably i would need a new throttle body.
Never ooen the throttle by hand very dangerous and nissans and Infiniti you need a scan tool to rest the idle someone with a scan tool that can relearn the idle very common issue after cleaning the throttle body on a nissan I don't touch those throttles unless I have a scan too to rlearn which I do now but didn't have before.
T.L 3 Gen gang gang
Prince Vegeta Lol, Love mimes ^
Acura TL 3G the best lol
My 2019 Honda Odyssey Throttle Plate does not open all the way when you floor it in accessory mode.
Good video dude , i have a question i did everything you did but when i hit the start button to open the throttle body on order to clean it inside it *wont open* why?
My car is lexus is350 2015
Gotta hit the start button 2 times
fabolousg4ever i did , but still not opening
@@KingKing-ds7gi is the car in accessory mode
fabolousg4ever yes bro
My butterfly doesn't open when car is in the on position and the pedal is pushed, can I just disconnect the wiring harness to the throttle position sensor and manually open the butterfly?
Good video if you wanna install a cold air thanks man
Thanks for your videos. Its helped me save money. I have a 05 tl and my clutch stayed down. I can put it in gear when its off but not when its on. What do you think is the problem and is it something i can fix myself. Thanks
Dicester * its your clutch needs replacement nope I would recommend getting the clutch rebuild
fabolousg4ever wow thanks for the bad news. LoL
Yes rebuilt
You right on time with this video TF i need to do this i have cracks in my air intake hoses need to replace. thanks man👍
You welcome bro
Hey man I have an 06 TL and when you put it in gear it has a low idle (about 500 rpms) and itll will occasionally stutter like it's going to stall. When the car is in park or neutral the rpm is fine... around 900 rpms. Once you accelerate everything feels normal as well. It shifts smooth and the power is there. Then when you stop for a red light or stop sign you'll see the rpms go back down to 500. Do you think cleaning the throttle body would help? Someone told me to try and clean out the intake air control valve as well but it looks like you have to take off the throttle body to access that valve.
Clean the intake manifold and throttle body and then report back to me I have videos up showing how to do both of you have any more questions just ask.
NO "Idle air valve" are used with TBW!
I have a question I have a 2002 Acura CL type S and my traction control throttle body I want to delete it. I understand by doing so my lights on the dashboard will come on but I can pull the fuses and the lights behind the dashboard not a problem, the question I have is, how do I block off the hoses to the cooling manifold? is there a special hose that blockst off the coolant?
Hey man, do you have a video on how to diagnose and fix a bad idler or tensioner pulley?
No I don't but will make one
fabolousg4ever alright cool, thanks for the vids!
How difficult is the TB unit to remove? I had an 05 Pontiac Vibe with the 1.8L 1ZZ engine and the throttle body was 4 simple bolts, (plus the coolant lines but I bypassed those). I used to remove the TB completely and that made it really easy to clean the butterfly and the ring that would build up around the butterfly bore. Then I could even clean further into the intake. Had a simple gasket that I would replace each time. I would rather remove the whole TB unit to clean if it wasn't too difficult.
Anthony Putzell yea just 4 bolts also super easy
my compliance bushings are shot, I was thinking of changing the whole LCA on both sides... I was looking into aftermarket. The OEM are 350.00 a pop. You have any knowledge of pros or cons of aftermarket arms? I was looking at Mevotech supers.
I like your video, I have 2011Acura mdx which starts and dies off, I am going to do some clean up this morning. But hey I didn't like your breathing pattern, try and get check up your BP, O2, and stuff. This is coming from a nurse . Thx
got asthma and a heart mur mur im ok though thanks for asking just tired .
@@fabolousg4ever ok sir,
try scanning the car with a full system scanner it could tell you exactly whats wrong with the car.
So if I take the throttle body off completely to clean it up would it be necessary to relearn idling ? If so, how the relearn is done?
tico1983
Maybe..sometimes nothing happens..but other times your car will have a 3000 rpm idle, or limp low power mode.
You need a high end scan tool ,that can do a throttle body relearn
@@patrickstar1439 oh ok thank you so much for your information good thing I didn't take it off .
This the tipe of vídeo and perfect one that I was looking for to do the right cleaning to my electric tboddy thanks dude for share this great video,, by the way I did it as you just did to your car I also fallow all the procedures as you and when I started the car have some message on the MID shown check vas check trailer sistema check admissions sistem and more so I don’t know if this is harmful for the car please some advise thank you,,
Erase the code its from the unplugged sensor when you did the cleaning on the throttle body just erase it you should be fine.
fabolousg4ever thank you so much for your concern and reply but the check engine light and the other two lights went off by it self
Ok good you should be fine now
I installed a $60 intake into my 08 TL back in February and my engine light turned on so I drove like that until I saw this video and cleaned my TB but now my VSA light is now on too. ALSO WHEN I STEP ON THE GAS MY CAR SHAKES!!! Any help???
Try taking to it to a shop and let them hook up a machine to forget the throttle position and do the idle relearn procedure
Your aftermarket air filter probably made the MAF sensor dirty from the oil they pre treat them with. I know that is a common issue with k and n at least.
If I've never done this before, should I remove the throttle body in order to clean the back side of the throttle body more thoroughly? Car's got over 100k miles on it.
No you don't have to you can clean the plate on both sides when the valve is open the last thing u need to do is to take the throttle body off and then cause a leak or some other problem when putting it back on.
@@fabolousg4ever ok, thx very much for your help
U welcome
Perfect.
It's nice to see a video 🎥where African Americans aren't doing🚬 heinous🎲 horrible 💉things 🔪 . We need to see 👀more videos like this . Thanks . 🌈
My throttle body won’t open when someone holds on the gas part
It is so dangerous to put your fingers into the flapping valve! Don't do it.
a well "finger chopper" with endless torque courtesy of the reduction gear set
🤗
No its not you probably have a baby hand
That's bull, I do it all the time when I service my customers cars.
Thanks for saving me a couple hunnert bucks!
You welcome
Oh lawd the valve on mine won't even budge when I press gas pedal!! Poop does this mean I need a new one?
Are you sure it's e throttle?
Same thing here, had my sister press the gas and it didn’t open like in the video
is the key on the second position
Can you do a video of how to clean engine bay
I already did
link to engine bay cleaning video
ua-cam.com/video/F5IF7zBPJXY/v-deo.html
thanks !!
Please my man I have a problem with my 2004 TL. It consumes too much fuel though I do more of City drive but I know it consumes just too much. Then for over a year now my VSA and Brake dash light won't go off. Please help me? What can I do?
DeFUN studio u have low brake fluid in your revoir that's why those lights are on and to save gas do a tuneup on your car and change the pcv valve make sure you have proper air in your tires and make sure that throttle body is clean
DeFUN studio whats your average mpg? I get around 16 in the city, seems to be the average on these cars.
I Get 8 MPG!!!!!!
@@mileschavez-friedman8401 your BRAKE CALIPERS MAY BE JAMMED...
Rusted caliper bores or
SLIDE PINS need LUBE
simple test us lift car see if all 4 wheels can spin effortlessly by hand... look at rotor aspects for signs of high heat
I tested brakes they’re good, even when the car is parked and on I can see the decrease bro
Hey man my car when the ac is on and the fans turn on the rpms goes up too 1100 and it feels weird, dont know whats the problem ☹, i recently did a trottle body cleaning, radiator flush and spark plugs
Voltage dip and rpm's go up but not that high either weak battery or alternator.
fabolousg4ever so you will say its the battery?
No they both have to be tested how much does the voltage drop with the ac on car voltage should be over 14v at idle with nothing running
fabolousg4ever no man i just went to autozone everything is working properly, 13. Some thing with ac on
Thank you. 👍👍👍
BTW, DO NOT manually push that throttle plate valve with a tool or a your fingers, you can easily damage the throttle plate motor gears, and your buying a new Throttle body unit.
Would this cause my Rpm’s to surge after I put everything back and turn it on ? Bc I cleaned it today and now my car revs by its self
What if I did everything but disconnect the maf
Anthony Delgado yea that's fine
fabolousg4ever it took 7 tries for it to turn on
Thanks much :)
No prob
toyota avensis 2007 1.6vvti idled poorly for 10 minits after cleaning throttle body
Has to relearn the idle once you clean it
Where are you in ny , I NEED you to work on my TL , would be really nice
Etime All the time queens NYC my info is on my Instagram fabolousg4ever
I messed up my throttle body on my Honda. I took it off and cleaned it. Once I had it removed. I moved the throttle plate with my hands to clean the back side. Once I put it back on. My idle was all over the place. So I will just leave it installed and clean like you did. DO NOT MOVE THE THROTTLE PLATE WITH FINGER.
How did you fix the idle problem?
You need to do the Re-learn procedure
Derrty92lude I did. But I got a hold of a Honda scan tool and reset it. That worked perfectly.
half job. you did not clean the back side of the body where there are the more dirties. You had to put out the whole of the throttle body
I would take that throttle body off completely & clean the shit out of it.
Yea that way works too
Imagine if the person lets go of the gas pedal whilst you're working on it, you could cause injury to your fingers or damage the unit. Use a brick and wedge it in there.
Not so good
My Acura to got a check engine light after doing this 🥲
Disconnect your battery for like 5 minutes.