Installing 25mm Amazon Wheel Spacers On Infiniti Q50 (FLUSH FITMENT... ALMOST)
Вставка
- Опубліковано 2 жов 2024
- Finally decided to get spacers for the Q50 and I decided to go 25mm all around after doing some fitment research. I went with an Amazon named KSP and so far everything looks and feels great. I will keep you guys posted if anything comes up down the road. I honestly wished I had gotten them earlier. Better late than never right...
If you enjoyed the content and want to see more of my build, feel free to like and subscribe!
Links for the item used in this video: (USA LINK | CANADA LINK)
- Spacers: amzn.to/3i1VPDp | amzn.to/3gck8fF
- Wire Brush: amzn.to/2Tt4MeW | amzn.to/3yM5sw2
- Copper Anti-Seize: amzn.to/2ROR99z | amzn.to/3i4lHP7
- Brake Cleaner: amzn.to/3uAF9Wn | amzn.to/3wP8a29
Follow me on Instagram for updates and casual posts:
@anishnothoo
Discount Codes:
Electric Tailgate Opener: bit.ly/2ZbBJwh (Discount Code: anishnothoo)
Rear Turn Signal LED Lights: bit.ly/Lasfit_7... (Discount Code: anish&lasfit)
Below are some affiliate links for the parts/ products I have used on this channel. If you do use them then I will get a small commission from it which helps support the channel. Thank you in advance!
Car mods list: (USA LINK | CANADA LINK)
3M tape for diffuser/spoiler: amzn.to/2HoDf8F | amzn.to/2SKBSVr
4th Brake LED Light Bar: amzn.to/339bYib | amzn.to/2G3F1LJ
Adhesion promoter pads for diffuser/spoiler: amzn.to/36VtR5a | amzn.to/2GImbrB
Avery Dennison Vinyl for roof wrap: amzn.to/35STg0c | amzn.to/2xNTqHC
Cross stitched all-weather floor mats: amzn.to/2J2h74h | amzn.to/2E7hbeo
Dashcam: amzn.to/2ITBgJX | amzn.to/2XV5kKT
Diffuser: amzn.to/3pQLV9d | amzn.to/2URjl9n
Electric Tailgate Opener: bit.ly/2ZbBJwh (Discount Code: anishnothoo)
Front lip: bit.ly/3anB9yx
Hardwire kit for dashcam: amzn.to/2USJKUc | amzn.to/2KcbHkH
Infiniti logo puddle lights: amzn.to/3fnuIzm | amzn.to/2tkzWF6
Infiniti start/stop button accent: amzn.to/370qVEf | amzn.to/2GDq4xW
Memory card for Dashcam: amzn.to/3fnuKY0 | amzn.to/2WVIgbM
Mirror Caps: amzn.to/34Zrlec | amzn.to/383R9rs
Neck Pillows: amzn.to/35UKGy2 | amzn.to/2URunLQ
Rear License Plate LED Lights: bit.ly/3eBqGlu
Rear Spats: amzn.to/36XIqoT | amzn.to/36qcR8B
Rear Turn Signal LED Lights: bit.ly/Lasfit_7... (Discount Code: anish&lasfit)
Roof Spoiler: bit.ly/2ybc7W5
Side skirts: bit.ly/3csydly
Spoiler: amzn.to/3lU8mIk | amzn.to/2WZ9PRG
Strobe Module: amzn.to/35QM1FS | amzn.to/3kF76rS
Valve Caps: amzn.to/339cDAl | amzn.to/2YFf0c2
Vinyl used for chrome delete: amzn.to/374bQls | amzn.to/3i9PQsO
Vinyl wrapping exacto knife: amzn.to/3kPhBbv | amzn.to/2E9MzJ9
Vinyl wrapping squeegee: amzn.to/35SBiLf | amzn.to/2GFyOU5
Yellow Tint for Fogs: amzn.to/2X48ie8 | amzn.to/2MsqkVx
Other stuff (All of these products have been used on the channel and I vouch for them 100%):
(USA LINK | CANADA LINK)
Aftermarket Lug Nut with Key: amzn.to/3noDmkB | amzn.to/3gIs2Np
Blow dryer ("heatgun"): amzn.to/395x4BV | amzn.to/35QEiYk
Circuit Tester: amzn.to/3fnqcRq | amzn.to/34zFhLV
Clay Bar Kit: amzn.to/35Xq4VX | amzn.to/3aM6JH1
Copper Antiseize: amzn.to/2Kl8h2j | amzn.to/3bFbDoX
Dremmel Rotary Tool: amzn.to/3lT1MSd | amzn.to/31MI3vw
Heat Shrink Kit: amzn.to/3pQIoYv | amzn.to/31M2r00
Hub-Centric Rings: amzn.to/378ddAw | amzn.to/3gLluh5
Meguiar's compound: amzn.to/372btri | amzn.to/2GEJmmE
Meguiar's drill polish head attachment: amzn.to/3fnz6OR | amzn.to/2tjxmPq
Meguiar's polish: amzn.to/2IXeL6T | amzn.to/2UV2Ya4
Meguiar's wax: amzn.to/2IYQe1F | amzn.to/2WWKmYR
Microfibre towel (180 pack): amzn.to/3l0fLEQ | amzn.to/2SO4ugK
Painters Tape: amzn.to/3nMDlXq | amzn.to/2Yu2DjI
Rust Proof Grease: bit.ly/3dRr6Uk
Soldering Kit: amzn.to/3pQcifn | amzn.to/34wTNEk
Tire Tread Depth Gauge: amzn.to/2W6HVnn | amzn.to/2W88Y1C
Turtlewax dash and glass (for interior cleaning): amzn.to/3pQ9I9o | amzn.to/2IaiLjK
Wire Taps (t-taps): amzn.to/332ivv9 | amzn.to/3jE9Zb4
Music:
- Chill Jazzy Lofi Hip-Hop Beat (Copyright Free) Lo-fi Music By KaizanBlu
- OCTILARY
- Cutting It Close - DJ Freedem
- Oh Wonder - Body Gold (Louis The Child Remix)
I have 245’s on the front and 275’s in the rear. For that flush look on the Q what wheels spacer size should I get?
Did the company end up sending you your money back? I got spacers too but different company and I received the same letter but the instructions of where to send the video isn’t clear. I wanna try getting my money back too
yeah i think you have to post it on youtube, so it's like advertising for them
I just lowered mine on BCs and the gap is so noticeable when it's that close to the fender edge. Mine is hagane blue too. Sexiest color Q sorry everyone.
agreed i love this color
Honestly it's better to just get wider wheels. So that they fit flush
Bro I just found your channel and subscribed I got a q50S and all your vids are gonna help with my upgrades
Damn congrats on the car bro! Unfortunately as you saw mine is gone but I hope the videos still help you out. Feel free to reach out if you have any questions cause I know the quality of the earlier vids aren't that great
Ayo awesome bro! I’m thinking about doing the same to my 3.7 until I get my new rims and tires set and suspension bc’s. One question I have for you is how does the car drives afterwards I need my ride to drive smooth 😅
It’s smooth bro
It’s too much 15 mm is the right one rear and 10 mm front
Dope. I wanna throw 1 or 1.25 inch spacers on my Q70. Hopefully the wheel well is big enough to run 1.25
Hi I ahve the japan model q50s/skyline...19 inch wheels as well...i'm considering spacing the rear...i'm concern about the front...your thoghts?
Hey Anish. What’s up man, quick question, the 25mm spacer should fit fine on the front with stock height right? I seen people run 25mm on stock height with the Q50 but I’m not sure if any other mods have to be done. So I should be fine right? Thanks.
Hi Anthony, hope you're doing good boss. Yes, spacers will fit fine with or without suspension mods. From my experience I felt I could have went maybe a couple more mm in the front but didn't want to risk it
@@AnishNothoo - thanks pal! Appreciate it. My spacers just came actually lol, ordered them from Z1 motor sports. I will be installing them tomorrow morning! I wanna install them now lol but weather forecast says it might rain soon lol. Take care bro, stay safe, and thanks again for your answer.
Love the rear setup on your car, where did you get your half spoiler and diffuser ?
what is the socket size ?
Hey man could you please tell me what tint you have on your tail lights and if you have any on your headlights
of course! On the tail lights I have a light smoke at 55% and nothing on the headlight. I have a video on the channel going more in depth about the tail light tints if you wanna check it out
@@AnishNothoo alright awesome! Thanks man!👍
i think he meant your fog lights
@@R1KEV I got nothing on the fog lights either. They're already pointed so low can't afford to affect the light any more lol
Did you have to mod your original studs?
Very nice fitment and the screw driver trick for the rotors dope I been wrenching for 10 years I bought my 1 inch spacers I'm stock height just want more stance
Do you use the regular size lug nuts or do you need longer ones
Looks good! This will be a good option for me winter wheels (stock). My summer wheels poke out an inch, my stocks are hidden an inch.
Welcome back. Hope you had a nice winter. Car looks great.
Thank you! Hopefully I'll be able to bring some cool stuff for you guys this summer if I can find anything
How the ride quality after the installation of the spacers?
Good question! The ride quality should not change at all and that's exactly what I experienced. With a wider stance some say that you will be more stable but its not enough for you to feel it while driving. Getting spacers is more of a look thing tbh, just make sure to torque everything down properly!
looks dope! i like to drive aggressive especially on S curves,.. would they be safe?
what i’m wondering
torqued properly i believe they should be fine. not advice though, just my opinion from driving with them for a while
Would this clear with lowering springs
I literally just called a shop about wheel spacers 2 min ago 😂 and I have a q50s
LOL it's calling for you! I got my spacers in less than 2 days so might be worth a shot for you as well
@@AnishNothoo I need to lower asap, what lowering springs you recommended?
@@akh-co6lk I cant recommend any bc I've never used them personally but I see a lot of people go with RSRs. Heard good and bad things about them... mostly good
@@AnishNothoo ur on coil cover? if you are what kind
What was your beginning back spacing?
how low are you lowered with spacers
i think 2 inches lower from oem height
Looks good. About to order mine. What’s the link to the splitter and side skirts and rear defuser? I’m also trying to gloss black all the chrome on my sport as well
I listed all of the links in the description in the previous videos I did for those items
Looks great, I'm planning on doing the same to my q50 but just curious did you use rsr lowering springs and if so we're they down or super down cuz I want the same look for my car,thanks
I have BC coilovers on this car and the setting were somewhere in between the downs and super downs
Where did you get your body kit? Looks great.
As if you lay your wheel flat on the floor. No fussed about scuffing them are you lol. Car looks good though 👍🏻
oh trust me, I was scared the first time doing that. But I have meaty tires on so the actual rim never touches the ground unless I slammed it which is impossible for me to do
Does it fit on 2020 q50?
Great vid bro, What are your tire specs?
these are oem 19 inches that came with the car
I wouldn't go wider. Looks clean the way it is.
What’s your tire size all around ?
How many inches did you lower it front and back? I think this is very tasteful and what I am looking to do with my coilovers
I believe it's lowered 2 inches front and back from oem height. I used to have 3 inches in the front which looked really good but I advice against it now as it'll really eat up your tires unless you get adjustable camber and toe arms
"OHP .. FUCK"
What make are those spoilers (trunk, side skirts, rear and front)? Could you share a link/site please? They look great! TIA
The front lip and side skirts are stillen. The trunk, roof spoiler and rear skirts were all from ebay. I have links for all of them in the description but some of them are no longer manufactured so you might not be able to find them unless you dig really deep lol
@@AnishNothoo ok, thanks!
Nice fitment ima buy me some real soon
Would these work for a 2018 q50 luxe with the stock 18 inch rims?
yes, only thing that changed from the 2014-2017 and 2018+ was that they did a facelift
Like the fit 🔥🔥
YOO WE'RE BACK BABY
LETS GOOO
What trim is ur q50?
It's a 2015 Sport with all the tech package (fully loaded)
Where can I get those side skirts?
Should be in the description sir, if not it's prob sold out
@@AnishNothoo your link is a stillen side skirt, but the video you made says eBay side skirt?
Oh yeah cause I couldn’t find it on eBay anymore and the ones that are on eBay are charging an arm and a leg for it so might as well get the original stillen ones
Awesome vedio mate! I just order 25mm for my Siver Sportand can't wait to see the result.
Is there any cons and pros after you installed these spacers?
great to hear, you will love them! the main selling point is the looks and as for cons I did not see any
@@AnishNothoo The cons is you might die on highway and on really hard corners, and if you didn't die, other than healthcare you'll have to replace the whole suspension with your own money as insurance claimed you have modified your car.
The pros is your car looks dope before its wheels fall off.
@bwedges had this on for so long lol, the only way it falls off is if you didn’t prep the surface well or if you didn’t tighten it properly. In my case, the amount of prep I had reduced the chances of anything happening. So anyone following this video should be alright
@@AnishNothoo I mean, I just installed a set on my car too yesterday actually. But I keep hearing horror stories about studs snapping off, or the spacer cracking, it gives me debilitating anxiety.
Good tutorial! Do you have a link to the rear diffuser extensions?
I believe that's the video you're talking about for the rear aprons: ua-cam.com/video/aO5Pk5B7u8c/v-deo.html
Purchase link should be in the comments!
Did you have to do camber alignment after?
nope, I asked my mechanic and apparently it's got nothing to do with the suspension so no need for any alignment
Nice setup! Wondering is there any rubbing or scrubbing when you turn your wheel far left/right???
thanks! no rubbing for me at full lock
@@AnishNothoo Did you had to cut the OEM studs to make it fit?
@@laurentfiliatrault1158 no cutting, just bolted it on there
Nice, are you lowered?
Thanks! Yes, lowered on BC coilovers
@@AnishNothoo subscribed. Your content has been great, especially being a new q50 owner, I find myself checking your videos on what I want to get next as well as install. Keep it up. Definitely getting some spacers , that will satisfy me until I pick wheels.
Hey bro. What's the tyre size?
oem 19 inches for q50, sorry I don't know the exact size
I went to get them installed and a tire shop but they said that the lug nuts were too short do you know where I can get extended?
lug nuts or studs were too short?
@@AnishNothoo they said that the nuts weren’t long enough because the socket didnt have enough room to turn
@@Slw_cs are you using oem wheels or aftermarket? Most people buying this didn't have this issue
@@AnishNothoo im on nismo v1s yeah idk maybe they just didn’t know what they were doing
@@Slw_cs i love your wheels but yeah sorry I'm not sure how to help with this
Is it possible to change the studs on the spacers?
i'm genuinely not sure about that
Do you have lowering springs ?
lowered on BC coilovers
What you running, rsr downs?
BC coilovers
Looks good. I think in time, spacers cause more wear on the bearings etc.
@alexkennedy7186 you're wrong. 1 minute of research will tell you it causes premature wear on front end parts.
@alexkennedy7186 unfortunately they do
How is ur car running now? Any problems yet?
What do you mean? No problems at all after installing the spacers if that's what you're asking. No vibrations or wobbling or anything, they're great quality spacers
Any shaking?
big no, it should be smooth as it was before if installed correctly
Vibration??? And Handling???
no change from original setup
How did these hold up?
all good and several other people bought and seem to have no issues
Just one word, AMAZING 🤌