Simple and Cheap DIY Tent Wood Stove.
Вставка
- Опубліковано 20 вер 2024
- In this video. I would like to show you in step by step how to make a simple Tent Wood Stove. Size can be adjusted according to your need.
pleas watch through this video and SUBSCRIBE my channel for more videos. Thanks for watching..
That is the best video I have yet to see on building your own woodstove. Great tutorial
Love the use of salvaged Olive Oil cannister, and the savvy use of improvised metal sheet bending jigs. Although the stove is not air-tight, the open air tent set-up would not create or allow dangerous accumulation of carbon monoxide. Really impressive fabrication of fully functional parts from simple raw materials and modern screws, washers, and rivets.
The thing was clean and well planned.
Encourages me to give it a try, recognizing that the apparent simlicity and seeming effortlessness, is actually the result of much experience with the tools and materials. This was like watching the performance of a virtuoso musician.
Awesome job on the stove. Excellent
Only power tool used was a cordless drill. Great craftmanship! A decent cooking skill to boot. I am impressed.
He used an angle grinder as well
Nice job! Well planned and executed. I thought the pipe jig for shaping your own stove pipe was genius. I may have missed it, but can you please provide the hole diameter (again?) but more importantly what size pipe did you use (O.D. of the pipe) for shaping the stove pipe? Thanks!
A couple suggestions (as I have been taking notes for over a month now to build my own beast soon! 😁):
1. Pull the top and insert a baffle under the stove pipe. Make it the length of the stove less a couple inches or so to allow air flow. It will help create a cleaner burn and a bit more efficiency.
2. I LOVED the home made chimney cap. Again: genius. Add one more thing: wrap a fine mesh metal screen to help reduce any chance of tinder from blowing out and falling on the tent. A baffle will most likely be the first line of defense, but minimally I would at least add the mesh. Note: Some retail designs incorporate a mesh at the base. Problem with that is it clogs easily and needs to be cleaned more often. Again, a good baffle might reduce that, but I personally think it makes sense to do it at the top. Now there is no chance of a blockage.
3. Lastly (quite honestly, should be #1 😆): make a damper. Do this and experiment with the “top down” fire method. This combined with a closed damper and a touch of air input, will provide much longer and efficient burn times. Less wood. Less stoking. More sleeping on a winter night 😎
Do a search on Ytube for “top down” burning. It has changed the way I do fires now. Goes against what we all normally do, but trust me… it simply works! And here is the skinny on another reason why to to it inside a stove:
A cold chimney has no draft. So when the fire is started at the base, it takes longer for heat efficiency to create enough “pull”, which in turn is why smoke blows back into a tent (or house). BUT… with the top down method, another gain is the fact that heat is generated just below the stack, establishing an immediate “pull” of warm air up the stack. It draws out the smoke instantaneously by heating the stack faster. Now. This might might prove an issue with an internal baffle… which is why MY version will incorporate a sliding baffle… pull it forward for lighting a cold stove, slide it back after she comes up to temp!
😎😎😎
Thanks again for the great video!
Best!
Edit: I forgot to mention: Top down burning also helps with wet wood. Search videos. The large wet wood sits at the base, with the dry tinder at the top. As the fire slowly drops downward, the hot coals will dry out the layers below! 🤨
OK I have a cast iron cookstove heavy and only able to haul it on a sled or trailer into campsites...but now thanx to your time on this tutorial I will be making one like yours!!! ;)
this was an AD and i watched the WHOLE thing.. subbed. and i been thinkin about making a 'small' smoker out of a used propane tank with a welder attatching a side box etc. this is up my alley
Thanks for sharing!
No welding, no grinding wheel major skills.... Really good 👍 I'm trying to build my own 😊
Obviously you're very skilled, that helps! That's why it looks so easy when we see you...
I wouldn't even think of trying to build the pipes 😳🤯
Keep sending your great ideas!!
Well done , also nice camp set up. The stove seemed to cook well .
Burning galvanized metal in an enclosed area can be very dangerous. Union sheet metal worker here, suggesting to use 16 gauge black iron as thin metal that you can bend with your hands may burn through. Not to mention the harmful fumes that are produced when heating galvanized metal to such temperatures as a stove.
Thanks for
Are the galvanized chemicals burned off once the metal grays over 100% making it safe or does the galvanize always give off toxic fumes even after "burned-in"?
Ur design is very useful and easy to understand. I watch 20 videos where people unreservedly make it so complicated.thks
The best DIY video for DIY wood stoves. Well Done! 👏👏👏👏
Great video to just sit and chill while watching it.
I hope next project you can made the knock down/portable version of wood stove.
Bravo ,simple et rapide et efficace 👏🏻👏🏻👏🏻
Very well done. However, I wonder if that very cheap metal can sustain a fire for very long hours. and what would happen during very cold weather knowing there will be a lot of contractions and expansions, and very fast. Also, the bottom may melt if you don't put rocks or a grid.
What is the thickness of your galvanized material?
I think it was 24 gauge metal. Any heavier gauge metal would have been difficult to bend by hand so thats why i'm thinking it was 24 gauge 😁😁
Great video bud ,nice work on the stove. Stay safe and be well brother. 👊😎🤙🍻🇺🇸
Thanks for writing brother 😊
Brilliant! Kept my interest the whole way through!
You need to tell people to burn the stove before using in a tent to remove the chemicals on the metals
Ok my friend. I will do that thanks for your advice….
Haha. I dont think thats his responsibility.
Yes, Yes that is very important. You must remove the chemicals. And did you clean your knife between chopping the wood and cutting the food. Very important, very important. And did you clean the top of the rock from all of the dirt. There are germs on the top of the rock if you did not clean the rock. And, did you wash your hands before eating, Very important. Thankyou Joe for pointing out that the chemicals must be removed. Very important, very important.
Galvanized metal is very toxic, that's why you must burn it off outside first
This is galvanized metal. You can get zinc poisoning from it.
Outstanding, great technique!
Clever stuff buddy! Thanks for posting, I learned some good tips 👍
needed. really isn't Galvanized
Maybe i missed something but i haven’t see the size of pipes so they can fit one in an other, can you help me with that please?
Gona leave a like before watching. Looks promising hehe
Please share the metal type and thickness. Thank you
Hey you shouldnt use galvanized steel.. They produce toxic fumes when under a flame but good work over all gonna use this video for inspiration for my build for a oil wick heater
Awesome and epic video thank you so much for making it ❤️👍
What the place it? Tnks for video! Nice job!👍
Well done, great job and very enjoyable episode!!
Thanks 😊
What are the measurements and the thicknesses of the metal? Thanks for
the great video..
Thanks for watching.. the thickness is( .6 ) mm
Thank you sir its awesome ❤
Very nice build. You have given me a few ideas. Thanks for the video
Amazing ... Really enjoyed watching this. Thanks for sharing ATB
great skills and a very nice stove. Thank you Sir :)
Amazing work; thanks for posting.
Brilliant how to make video...
Now you must do a folding design how to make video...
Gracias por las ideas té felicito
Saludos
How is the stove holding up..anything you would change on building it?
what gauge was the sheet metal? Thanks for the video.
A craftsman at work
Wow 👏 😍
Very usefull. I agree with you.
Nice 👍
Great video! I like that you don't speed up anything so you can see everything step by step. Do you have a material list? I want to build one for a co-worker.
Hello friend.. thanks for watching. I used (0.6mm)galvanized plate.If you have any questions please let me know.. I’ll be very happy to help 😊❤️
@@karzanhiking2635 thanks, what size pipe did you use to form the exhaust
The diameter is 7cm
@@karzanhiking2635 awesome, thanks!
@@karzanhiking2635 if you post this info along with the sizes that you used in the video descriptions, it will save you and everyone a bunch of time! 😀Thank you
The stove is putting off poison gas as the oxidation burns off the metals that is very dangerous using it to cook on before completely burning stove and removing all the galvanized on stove
Nicely done. 👏👍✌️
구독 좋아요 대박 행복
Nicely done
What knife is that you used to chop firewood with? Can that be bought or is that also homemade? And did you use anyplans or design this yourself? If you did could you please share them? Also you could use a ball of steel wool to further prevent sparks from buring holes in your tent. Great job I subbed. Thanks.
Thanks for watching.. yes it’s also homemade, the blade has been made by a blacksmith friend, and the handle and the leather sheath has been made by my self, I’m sorry I haven’t made any videos for it, hopefully In the future i will make a video and sharing it… thanks for your comment 👍😊
Once you burn steel it galvanizes itself with soot
Gracias por compartir
....love it❤, diy or die😂
Are they just regular screws you used in the stove or are they some kind of special rivet. Any help would be greatly appreciated. Brilliant stove thank you
I mean the screws use for attaching door hinges
Thanks for watching. Metal screws
It would better if u mentioned, the thickness of the iron sheet and measurements, you cut..
Good job
Bravissimo!
Wish you showed material used and some plans with dimensions on it. Make it easy to copy your design. Also costs would help.
Very nicely done. Was that an old olive oil can that you used to make your stove pipe?
Thanks for watching… yes it’s
إبداع رائع جدا
Amazing!
Please also tell us the dimensions and plan of the fireplace
Nice 👌
Hello Sir I'm a new subscriber and I just ran into your video. Seeing the way you made your wood stove was easy and to the point . I've 3 dozens of wood stove making and honestly yours was the best between all of them videos I've seen . Thank you for sharing . One question how come you didn't ad on the next tempered glass on the front ? I'd ad one if it were me . But to each his own . Thanks again for sharing. . Is it ok that I use your idea to make me a wood stove ?
Hello dear thanks for watching and subscribing my channel… well by the time I couldn’t get tempered glass yes you can if you want it. And of course you can use my idea to make your wood Stove I don’t mind if you want it and if you needed help please let me know I’ll be glad to help thanks again 😊
@@karzanhiking2635 Aww that's so kind of you to offer your help if I need it thank you very much for the offer . If anything I'll let you know . Thanks again !!!
thats great, congratulations, but sheet is too thin for me :)
COOL.......
Respekt!!
Is coal burn this stove ?
🎉🎉🎉❤❤❤😮😮😮
What gauge did you use?
It is something i would like to make, do you have dimentsions you can add
Hello..thank for watching..yes sure if you find me on Facebook by ( Karzan Hiking) so I can send you a picture of dimensions with my pleasure..and I will be very happy to help…
A+
Ty sir
Great job! What is the weight?
Thanks for watching..it’s 1.80 kilograms
atleast you are not using galvanized sheet metal like the last guy who made this design.
How in the hell do you hammer that close to your fingers and thumb like that? Inspired me to build one but my thumbs will NOT be that close...lol
this stove cannot be foldable, it is enought to buy one portable one @ dolloars 100+
Not smart
Please also tell us the dimensions and plan of the fireplace
Hello friend.. thanks for watching.. the dimensions is( L 36cm W 24cm H 22cm )
Please also tell us the dimensions and plan of the fireplace !