Hi Folks, thanks for watching! Just wanted to point you towards the description box below the video - I’ve added some additional information about the stove there - just click on the title below the video. Cheers. 🔥
Simon, a bloke in the woods hi simon, just want to say you have helped me through a really though time. My dog just died and I was really upset, then I went on UA-cam after a couple of days and saw this vid, watching it now but looks great, you da best. O.s. Can you camp on Dartmoor national park
Can you make a video detailing your polish lavvu tent you made. I want to make one but I would like a detailed list or video going more in depth. Thank you I would really appreciate it.
Keep in mind that I've only used it for a couple weeks, that being said, so far so good ua-cam.com/users/postUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM . Using it at 8 ft. by 8ft. deer blind that is insulated. I have to keep the door cracked for it to get enough air to burn, but that is very likely the wood I've used. Much better quality than I expected for the price. Now if I can just take it easy in the beginning it won't be 90 degrees in my blind. All in all it seems like a keeper.
I know this video is over 2 yrs old and already has over 1k comments, so I am doubtful anyone will read my comment… I just want to thank Simon for this inspirational video… I’ve completed my own ammo can stove, following the instructions as closely as the materials I had on hand permitted. I used a lot of hardware I saved from my dad’s business after he passed and was able to line the entire inside (except the lid) with thick steel sheet metal plates, and bolt everything together with rad looking stainless steel internal hex socket cap-head screws. I’m still working on the stove pipe… Amazon delivery expected tomorrow. I used forest green high temp stove paint to keep the ammo can theme going. And I used 3/4” metal conduit pipe left over from a project to add overhead lights in my garage for the legs. Yesterday I fired it up outside and got the stove exterior up to over 500° F. The paint started off-gassing and combustion was really efficient (very little smoke). I have had so much fun making this stove! Thank you Simon!
I have been compulsively shopping for stoves on the new and used market and they are high; a new one about this size is going to be $1000 and if you want a little bit bigger one it could go $3000 just for the stove, then there is everything you need to install it, the contractor and pulling a build permit. Then they have these tiny little ones for RVs. Those are about 1000. I’m going to build an ammo can stove for my bedroom.
I will not hesitate to say that this guy has some real true undeniable skills regarding metal working and fabrication , I've spent 17 years in heavy collision , vehicle customization and restoration as well am a skilled MiG welder and steel fabricator and to watch this guy bujld this thing with the only 3 power tools he uses for the entire process being a benchtop drill press, a 4.5" angle grinder and a jigsaw with either air saw blades intended for sheet metal or he's actually managed to find actual jigsaw blades intended for steel , either way both possible blades are practically the same thing , and to watch him do the rest of this by hand was very very entertaining and refreshing for me, got a lotta respect for this dude's work he showed us in this great last 30 minutes of my evening. Keep the creativity flowing man am about to browse your channel to see what other interested impressive videos you may have online here. Thanks for this video
In a word “Brilliant”! I’ve said it before on a different video, all good stuff, no drama, no fuss, no problem..... Always good to see someone with tools and knows how to use them. Very entertaining and informative. 👍👍👍
I really appreciate that you don't spend too much time on unnecessary shots. The pacing of your instruction is really nice. This little stove build is interesting and a great inspiration for reuse of an ammo can. Definitely has me thinking, thank you so much!
You're the boss. That is an industrial grade product. It is men like you who made England great once. It is no surprise that the industrial revolution began in Great Britain.
Hi Simon, If you go to a woodburning fire shop or a gas spares shop you can buy glassfibre rope and a special hi temp glue to replace the rubber can seal with the fire resistant rope seal. It should improve control by sealing the box completely.
Simon, I have been a professional mechanic and a Master mechanic my whole life for 40 years. You are certainly an impressive person with hand tools and your viewers can certainly learn a lot from you thank you so much
I've seen a lot of people make ammo can stoves (and I liked most of them), but to see someone who made one and uses it, come back with a new and improved version... OUTSTANDING Simon, actually loved the damper and the plate to make the smoke travel to find the chimney. Excellent updates on a great little stove to begin with. And if someone wanted 4 legs, they can use the same splayed legs you made for the back and just off-set them from the back legs, so they are beside each other when folded for transport. Thanks for all you do, great attn to detail
I'm so impressed with this ammo can stove. I have most of the materials needed. You gave such wonderful instructions. I may be able to pull this off lol maybe. I've watched numerous people give instructions on making one of these and so far hands down, yours has been the best. Thank you for making this video. Even if I don't get around to making one I totally feel like I could after watching your video!
As a bloke who had to carry around a heavy-ass military stove in the woods while serving, this thing looks absolutely gorgeous and handy! I would BUY one in a heartbeat!.
@@simonablokeinthewoods You have some of the best ideas. But if turn the bottom up, the lid is used to dump out the ashes and you can still use the original handle to carry the stove. One other thing take apart a hinge and mount it on the side . Two bend rods to dry your stocks.
I wish I had you as a shop teacher when I was young. Your narration and instructions were so detailed to help us build it right, but not "BLAH BLAH BLAH", like some youtubers. Your channel is new to me so I look forward to checking out all your other vids and getting bells for the new stuff. Thanks for sharing your talents and creations with us all.
Love this tutorial Simon. It has motivated me to have a bash at one, ready for winter. I'm going to be welding mine and using a mill to put holes in. I love the way you have made this so any diy type people with virtually no specialist tools can build one. Many thanks for all your videos, the have been an inspiration in my journey to adventures. Regards Tim.
I’ve made a few of these using different sized ammo boxes. I’ve found that replacing the rubber gasket with a type of high temp (fiberglass like) rope gasket and a high temp adhesive/cement made for wood stoves/fireplaces/boilers. I also used a similar product in a ribbon like form to seal the door. Just make sure to apply the ribbon on the door or face of the stove before marking/drilling your holes on the box for the door hinges to accommodate for the additional thickness of the compressed ribbon. Adding both of those keeps most all the smoke out of your tent on startup etc.
Those ammo cans make good miniature woodburning stoves. I didn't think of auto exhaust sections for stove pipe when building one from a propane tank; good idea. Thanks for showing.
I've seen and watched several videos of home made ammo can stoves and I have to say this is one of the better ones. It's simple and elegant in design and the flared legs and auto exhaust flange is a great idea.
Already have my animal can and pieces of sheet metal. The legs will be the problem but I got the electric drill. I got my grinders, I've got the stuff to do it. Thank you for the show I am joyed
I'm actually a vendor to convenience stores here in Oklahoma. I have literally pulled off the side of the road at a carwash to watch your awesome video. So worth it keep em coming.
highlighting the "dont you need 4 legs for it to be stable?" bit that he addressed: when i was in civil engineering school, we were told the minimum number of points of contact for a structure to be stable is 3 for something that is static/isn't supposed to move. now for something dynamic/is designed to move, like a car (insert reliant robin joke here) then you would need 4 points of contact, especially when going around corners. That being said, this looks like an awesome project to do if anyone plans on camping overnight! i've camped overnight in the cold. it was not pleasant, we had to huddle together for warmth, this would have been amazing to have, even for just starting a fire out in the open while the wind is blowing. Get up the good work! can't wait to see what else you come up with.
This would count as a static object then - once set up it isn’t going to be moving around so all good. On uneven ground, you’ll only have three legs in contact anyway, so positioning them in the splayed fashion ensures a nice stable wide stance. 👍👍
Best UA-cam video on making an ammo box stove. Definitely within the reach of anyone following this very comprehensive tutorial. Well done and thank you Simon.
Hello Simon, I have to say I could watch you work for hours. You're a dying breed my friend and a true inspiration. Yourself, along with Kent survival have inspired me to get out and explore nature again. Have a great day sir.
I hate to say it, time is money to me. So I bought my portable wood stove for Elk hunting/camping here in Montana from Cabelas. 10 years ago. And it’s still going STRONG. Takes to much time for me to build something like that. Although what you did is, outstanding!!!
Simon I really appreciate this. thank you! I've been trying to figur eout how you put that together so I could make my own and now? I have a instruction guide! you're great man!
Workshop, tools, skills, workmanship, materials, video quality, editing, is outstanding. No really annoying background music either. What a great video, nice one Simon. I guess the 4 dislikes are from viewers who have no tools.
I LOVE this stove!! You have done so well Simon, explaining so visually and well filmed, hats of to you sir you have made this old broad go out to look for a metal box and stuff needed to make a build of this kind. I LOVE the fact that this is a no-welder and can be done with tools I already have. Now on the hunt for materials!! 🥰🖐👍
I am a designer and I see things from a different perspective, a lot of hard working men making stoves and thumbs up to all of them, but they don't all look good regardless the functionality, I like the fact that your finished stove has some style into it, and its quite appealing.
Your craftsmanship and attention to detail is exceptional. I admire the use of recycling and giving new life to materials. The way you explain each step and why was very informative and easy to understand! Excellent video, I look forward to learning more. Thanks!
Another cracking DIY project Simon, you should go into production with them, i am sure there are loads of folks with polish laavu set ups, who would part with the cash for one of them!!!! lol. I also take my hat off to you for not only making the stove, but to also film it, it must have taken an age to put together. Once again well done that man. Cheers Stuart.
Thank you my fellow hand working friend. I've been wanting to make one of these to heat my 15'x23' music/hobby barn that i built and insulated inside the forrest behind my home as well as using while camping or fishing sometimes. You are very skilled. You've made it look easier than it really is lol, But you've encouraged and shown us that it is doable without having to have big machinery. I thank for it as well as being so 'to the point'. Many Thanks, dC Fayetteville Ga, US👍
Lovely design and something we can all do at home without a ton of special gear. One question..How do the soft metal rivets hold up to the heat over a period of time?
In his parts list in his show notes below the video the rivets are listed as stainless steel :). I was wondering myself as they looked like aluminum rivets! I've w small collection of different sized aluminum, steel and stainless steel rivets and it's hard to tell at a glance what the difference is, heh.
BRILLIANT IDEA - We used to cut a 45 gallon drum length wise and a bit of heavy guage mesh for cooking in the forces in the field! If you want a posh on you can weld hinges on the other half and make a lid!
Great idea and no shortage of skill to make it. Those cans have a multitude of uses and are as tough as can be! A stove in a tent? pure luxury!! Thanks for sharing.
Thank you for this post. I gave up some time ago on building one as every version I saw involved welding, and I don't know how to weld or had access to exotic or exspensive tools. Using rivets instead of welding makes this achievable. I'll start digging around for the stuff now, and start again. THANK YOU!!!
Love it, but as a welder by trade and the fact that a basic 110v wire welder is so affordable, you've given me a great idea. There's quite a bit I never thought of. Thanks very much.
Wow, very cool wood burning stove. The pipe is ingenious, all collapsed into portable pieces. All metal can b obtained @ home hardware store. Thx. 4 sharing on Utube. Happy camping.
I got all the components ready, and I just found the best build in this video to apply on my tent wood stove. I also got a sheet of ceramic glass to cut and add to the two sides on the wood stove so I can enjoy the fire while tucked in my sleeping bag. Thank you for sharing this video with us. You got a new subscriber.
I found your video randomly. I liked it and now want to make one myself. I don't camp or have an ammo can but still want to make one. Thanks for your video.
Hi Simon I made one of these years ago. For the flue I used 2mm thick stainless steel foil 6 foot long by about 11 inches. You can then roll the foil length ways to make the flue, and roll it width when you store it in the ammo can. Use 2 inch diameter stainless steel rings to hold the flu in shape whilst using it, you will need 6 a least. It is brilliant light weight takes up no space.
Wow.. really excellent stove build! I'll be adding this one to my favorites list! Some tips for you... 1) The vent in the front is called the "draft". 2) With the new damper installed, you won't need the baffle inside. By removing it you'll gain some inner space and have maximum heat control with the draft & damper combination. 3) Make sure you open the damper fully before you open the door. You won't get smoked out that way. Thanks for the Awesome video...
I don't understand why you need both, instead of one or the other? If the draft is wide open wouldn't the dampener partially closed choke the fire, or the dampener open but the draft partially closed do the same thing?
@@mikie2501 You would only choke the fire out if either one is closed too far. A fire needs to breathe. It inhales via the draft & exhales via the damper & chimney. The draft is always necessary in some form.. the fire won't burn without air. The damper is a mechanism for added control of the fires exhaust. Also.. if you open the damper fully a few seconds before you open the door, you won't get smoke billowing out the front. Slowing down the exhaust allows for maximum heat retention in the stove once it's up to temperature. So by controlling both air in and out, you maximize your heat output.
Simon, you've been holding out on us. You didn't mention that you are a metal fabricator....and a skilled one, obviously. You are a resourceful creature my friend. That is a bit of fine craftsmanship, excellent presentation, and a great stove. Thank you.
Only just seen this video, as usual very good content I made a similar stove/burner when I was a younger man, these old ammo containers have so many uses,Simon u r an inspiration to old and young alike ,many thanks
The secondary baffle on wood burners is more about the secondary burn of Co (carbon monoxide), which happens as your smoke hits the very hot plate, releasing the secondary heat, which would have been wasted up the chimney. Love your channel, and thanks for sharing your stove design, and showing us how to build it 😊
Hi Folks, thanks for watching! Just wanted to point you towards the description box below the video - I’ve added some additional information about the stove there - just click on the title below the video. Cheers. 🔥
Simon, a bloke in the woods hi simon, just want to say you have helped me through a really though time. My dog just died and I was really upset, then I went on UA-cam after a couple of days and saw this vid, watching it now but looks great, you da best. O.s. Can you camp on Dartmoor national park
Can you make a video detailing your polish lavvu tent you made. I want to make one but I would like a detailed list or video going more in depth. Thank you I would really appreciate it.
@Ashley Cumming Sorry to hear about your Dog - heart breaking!
Dartmoor is one of the only places in England where you CAN wild camp! 👍🏕
@Wolf Man I might do at some point. 👍🏕
Simon, a bloke in the woods yeah I went for my b day, it’s great I live like 7 miles away so I go there quite often
I have an old ammo tin in my shed and I bought a tent today, so my plan is to have another beer an continue enjoying this video
me outdoors Beware them diabeters.
@me outdoors: HAHahaha! Love the *action* being drink & watch, not build. Hahaha!
Highly motivated individuals depress me !: (! I'm drinking and enjoying ONLY.
Hey partner, just so you know you can buy a new ammo cans. If it’s a vintage I am OK and I came from Vietnam to or North Korea, you should def save it
Hahaha. Outstanding comment.
Keep in mind that I've only used it for a couple weeks, that being said, so far so good ua-cam.com/users/postUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM . Using it at 8 ft. by 8ft. deer blind that is insulated. I have to keep the door cracked for it to get enough air to burn, but that is very likely the wood I've used. Much better quality than I expected for the price. Now if I can just take it easy in the beginning it won't be 90 degrees in my blind. All in all it seems like a keeper.
I know this video is over 2 yrs old and already has over 1k comments, so I am doubtful anyone will read my comment… I just want to thank Simon for this inspirational video… I’ve completed my own ammo can stove, following the instructions as closely as the materials I had on hand permitted. I used a lot of hardware I saved from my dad’s business after he passed and was able to line the entire inside (except the lid) with thick steel sheet metal plates, and bolt everything together with rad looking stainless steel internal hex socket cap-head screws. I’m still working on the stove pipe… Amazon delivery expected tomorrow. I used forest green high temp stove paint to keep the ammo can theme going. And I used 3/4” metal conduit pipe left over from a project to add overhead lights in my garage for the legs. Yesterday I fired it up outside and got the stove exterior up to over 500° F. The paint started off-gassing and combustion was really efficient (very little smoke). I have had so much fun making this stove! Thank you Simon!
I have been compulsively shopping for stoves on the new and used market and they are high; a new one about this size is going to be $1000 and if you want a little bit bigger one it could go $3000 just for the stove, then there is everything you need to install it, the contractor and pulling a build permit. Then they have these tiny little ones for RVs. Those are about 1000. I’m going to build an ammo can stove for my bedroom.
I will not hesitate to say that this guy has some real true undeniable skills regarding metal working and fabrication , I've spent 17 years in heavy collision , vehicle customization and restoration as well am a skilled MiG welder and steel fabricator and to watch this guy bujld this thing with the only 3 power tools he uses for the entire process being a benchtop drill press, a 4.5" angle grinder and a jigsaw with either air saw blades intended for sheet metal or he's actually managed to find actual jigsaw blades intended for steel , either way both possible blades are practically the same thing , and to watch him do the rest of this by hand was very very entertaining and refreshing for me, got a lotta respect for this dude's work he showed us in this great last 30 minutes of my evening. Keep the creativity flowing man am about to browse your channel to see what other interested impressive videos you may have online here. Thanks for this video
In a word “Brilliant”! I’ve said it before on a different video, all good stuff, no drama, no fuss, no problem..... Always good to see someone with tools and knows how to use them. Very entertaining and informative. 👍👍👍
I really appreciate that you don't spend too much time on unnecessary shots. The pacing of your instruction is really nice. This little stove build is interesting and a great inspiration for reuse of an ammo can. Definitely has me thinking, thank you so much!
You're the boss. That is an industrial grade product. It is men like you who made England great once. It is no surprise that the industrial revolution began in Great Britain.
Hi Simon, If you go to a woodburning fire shop or a gas spares shop you can buy glassfibre rope and a special hi temp glue to replace the rubber can seal with the fire resistant rope seal. It should improve control by sealing the box completely.
Simon, I have been a professional mechanic and a Master mechanic my whole life for 40 years. You are certainly an impressive person with hand tools and your viewers can certainly learn a lot from you thank you so much
Thank you! I’m a carpenter/joiner so tools feel natural to me (although normally saws, chisels and planes!) 👍
I've seen a lot of people make ammo can stoves (and I liked most of them), but to see someone who made one and uses it, come back with a new and improved version... OUTSTANDING Simon, actually loved the damper and the plate to make the smoke travel to find the chimney. Excellent updates on a great little stove to begin with. And if someone wanted 4 legs, they can use the same splayed legs you made for the back and just off-set them from the back legs, so they are beside each other when folded for transport. Thanks for all you do, great attn to detail
I'm so impressed with this ammo can stove. I have most of the materials needed. You gave such wonderful instructions. I may be able to pull this off lol maybe. I've watched numerous people give instructions on making one of these and so far hands down, yours has been the best. Thank you for making this video. Even if I don't get around to making one I totally feel like I could after watching your video!
As a bloke who had to carry around a heavy-ass military stove in the woods while serving, this thing looks absolutely gorgeous and handy!
I would BUY one in a heartbeat!.
Indeed , I would love to own and use this. But I'm not very handy and have many tools . Would you consider selling some ?
Thank you, I do t make them to sell I’m afraid (although in these future uncertain times, that may change!) stay safe, Simon
@@simonablokeinthewoods
You have some of the best ideas.
But if turn the bottom up, the lid is used to dump out the ashes and you can still use the original handle to carry the stove. One other thing take apart a hinge and mount it on the side . Two bend rods to dry your stocks.
I wish I had you as a shop teacher when I was young. Your narration and instructions were so detailed to help us build it right, but not "BLAH BLAH BLAH", like some youtubers. Your channel is new to me so I look forward to checking out all your other vids and getting bells for the new stuff. Thanks for sharing your talents and creations with us all.
Love this tutorial Simon. It has motivated me to have a bash at one, ready for winter. I'm going to be welding mine and using a mill to put holes in. I love the way you have made this so any diy type people with virtually no specialist tools can build one. Many thanks for all your videos, the have been an inspiration in my journey to adventures. Regards Tim.
I’ve made a few of these using different sized ammo boxes. I’ve found that replacing the rubber gasket with a type of high temp (fiberglass like) rope gasket and a high temp adhesive/cement made for wood stoves/fireplaces/boilers. I also used a similar product in a ribbon like form to seal the door. Just make sure to apply the ribbon on the door or face of the stove before marking/drilling your holes on the box for the door hinges to accommodate for the additional thickness of the compressed ribbon. Adding both of those keeps most all the smoke out of your tent on startup etc.
If I was an ammo box salesman, I'd be preparing for the rush.... Great work Simon 🙌🏻
A suspicious rise in prices coming up!
Damn - I didn’t think of that - I should have secured some commission! 😂
Those ammo cans make good miniature woodburning stoves. I didn't think of auto exhaust sections for stove pipe when building one from a propane tank; good idea.
Thanks for showing.
I've seen and watched several videos of home made ammo can stoves and I have to say this is one of the better ones. It's simple and elegant in design and the flared legs and auto exhaust flange is a great idea.
You can tell when a project is fully imagined before the start. Then it's just Zen. ;)
Already have my animal can and pieces of sheet metal. The legs will be the problem but I got the electric drill. I got my grinders, I've got the stuff to do it. Thank you for the show I am joyed
I'm actually a vendor to convenience stores here in Oklahoma. I have literally pulled off the side of the road at a carwash to watch your awesome video. So worth it keep em coming.
Hey fellow Okie.
@@KimberlyGreen Hi fellow Okie's!
What are the chances that there are at least 3 Oklahoma residents watching an English outdoorsman? Too funny.
@@KimberlyGreen Ohio starts with an O. Does that count for something?
@@rodbagley Weeelllll ... it doesn't really fit in with the Oklahoma theme. But it's got 'hi' in it & that's friendly like Oklahoma. So sure. 😉
Human ingenuity is amazing.
Once the stove is painted and you see the flames in there, it is a thing of beauty. Thank you for taking the time to make this video.
highlighting the "dont you need 4 legs for it to be stable?" bit that he addressed: when i was in civil engineering school, we were told the minimum number of points of contact for a structure to be stable is 3 for something that is static/isn't supposed to move. now for something dynamic/is designed to move, like a car (insert reliant robin joke here) then you would need 4 points of contact, especially when going around corners. That being said, this looks like an awesome project to do if anyone plans on camping overnight! i've camped overnight in the cold. it was not pleasant, we had to huddle together for warmth, this would have been amazing to have, even for just starting a fire out in the open while the wind is blowing. Get up the good work! can't wait to see what else you come up with.
This would count as a static object then - once set up it isn’t going to be moving around so all good. On uneven ground, you’ll only have three legs in contact anyway, so positioning them in the splayed fashion ensures a nice stable wide stance. 👍👍
@@simonablokeinthewoods agreed
I built one using a fat 50 can about 2 years ago based on this video, watching again as I get ready to make another
Simon, a bloke in the woodshop. I've admired your stove for some time and hoped you'd show us how you made it, thanks Simon!
Simon, your craftsmanship is quite impressive
Nice one Simon, really brilliant, smart thinking, 4 legs can rock, 3 can’t. Love the tabs on the damper to hold to the rod, clever sod, 😃👍
Simon...a Jack of all trades...and master of them all
Simon that's amazing! You're a genius.
Best UA-cam video on making an ammo box stove. Definitely within the reach of anyone following this very comprehensive tutorial. Well done and thank you Simon.
Very accurate production, and the finished product is also amazing.
Hello Simon, I have to say I could watch you work for hours. You're a dying breed my friend and a true inspiration.
Yourself, along with Kent survival have inspired me to get out and explore nature again. Have a great day sir.
Thank you!
I hate to say it, time is money to me. So I bought my portable wood stove for Elk hunting/camping here in Montana from Cabelas. 10 years ago. And it’s still going STRONG. Takes to much time for me to build something like that. Although what you did is, outstanding!!!
Simon I really appreciate this. thank you! I've been trying to figur eout how you put that together so I could make my own and now? I have a instruction guide! you're great man!
Thank you , Simon .
🐺 Loupis Canis .
Goochy kit !
Absolutely fantastic tutorial!!! Well filmed, well narrated perfect blend of explanation and succinctness 👍
Ere Gobbles, there'll be no sinct sucking around here roy lad !
Workshop, tools, skills, workmanship, materials, video quality, editing, is outstanding. No really annoying background music either.
What a great video, nice one Simon. I guess the 4 dislikes are from viewers who have no tools.
Thank you mate! 👍
You forgot to mention the handsome artisan that made the hot tent stove!
This was good, shows all the steps so well.
I LOVE this stove!! You have done so well Simon, explaining so visually and well filmed, hats of to you sir you have made this old broad go out to look for a metal box and stuff needed to make a build of this kind. I LOVE the fact that this is a no-welder and can be done with tools I already have. Now on the hunt for materials!! 🥰🖐👍
That is ace - I wish I had the tools and skills to do this. Brilliant mate - I can appreciate the effort that went into this one. ATB - Chris
I am a designer and I see things from a different perspective, a lot of hard working men making stoves and thumbs up to all of them, but they don't all look good regardless the functionality, I like the fact that your finished stove has some style into it, and its quite appealing.
You continue to amaze. If I ever have a son, I'm going to call him Simon and he had better make me some awesome camping gear.
😂😂😂👍
Your craftsmanship and attention to detail is exceptional. I admire the use of recycling and giving new life to materials. The way you explain each step and why was very informative and easy to understand!
Excellent video, I look forward to learning more. Thanks!
Another cracking DIY project Simon, you should go into production with them, i am sure there are loads of folks with polish laavu set ups, who would part with the cash for one of them!!!! lol. I also take my hat off to you for not only making the stove, but to also film it, it must have taken an age to put together. Once again well done that man.
Cheers Stuart.
Thanks Stuart! 👍😁🔥
Id buy one too!
I'd buy one!
I would take two
Thank you my fellow hand working friend. I've been wanting to make one of these to heat my 15'x23' music/hobby barn that i built and insulated inside the forrest behind my home as well as using while camping or fishing sometimes. You are very skilled. You've made it look easier than it really is lol, But you've encouraged and shown us that it is doable without having to have big machinery. I thank for it as well as being so 'to the point'. Many Thanks, dC Fayetteville Ga, US👍
Lovely design and something we can all do at home without a ton of special gear. One question..How do the soft metal rivets hold up to the heat over a period of time?
In his parts list in his show notes below the video the rivets are listed as stainless steel :). I was wondering myself as they looked like aluminum rivets! I've w small collection of different sized aluminum, steel and stainless steel rivets and it's hard to tell at a glance what the difference is, heh.
@@mikie2501 cheers. I should read the notes as well as watching the video.
By far the most best homemade wood stove 👍
This project is going to repair the relationship with my father
You cannot place any value on that project then my friend , God bless you and your father
BRILLIANT IDEA - We used to cut a 45 gallon drum length wise and a bit of heavy guage mesh for cooking in the forces in the field! If you want a posh on you can weld hinges on the other half and make a lid!
Step 1. of building ammo can stove:
- remove live ammo from can before setting on fire- 😜
Yes, we laugh, but we had girl who put gorilla glue in her hair.
Being highly skilled with tools didn't hurt. Beautiful-- excellent craftsmanship!
you should sell these online, maybe e-bay or something.
Great idea and no shortage of skill to make it. Those cans have a multitude of uses and are as tough as can be! A stove in a tent? pure luxury!! Thanks for sharing.
that could be lead based paint on the box, use an appropriate mask when grinding the old paint off
Good advice. 👍
Probably one of the best narrative descriptions of a project i have watched! Good for any novice starting a DYI project! Good job!
Next tip: How to re-sharpen drill bits after running the drill press way too fast.
buy a sharpener :)
ol bench grinder is best
cs x 4 / d
Realy excelent build. Nothing too technical or difficult for the competent DIYer to do. keep the Videos coming.
Being a (nearly) local on the Norfolk Broads, it great to see this channel getting such a wide appeal from people all over the world.
Thanks Andy! 👍
This is exactly the video I've been needing to see as I had the same idea. This will help out massively. Thank you for taking the time to share.
Thank you for this post. I gave up some time ago on building one as every version I saw involved welding, and I don't know how to weld or had access to exotic or exspensive tools. Using rivets instead of welding makes this achievable. I'll start digging around for the stuff now, and start again. THANK YOU!!!
Love it, but as a welder by trade and the fact that a basic 110v wire welder is so affordable, you've given me a great idea. There's quite a bit I never thought of. Thanks very much.
Old school the way to go great job
Wow, very cool wood burning stove. The pipe is ingenious, all collapsed into portable pieces. All metal can b obtained @ home hardware store. Thx. 4 sharing on Utube. Happy camping.
Bought one today at harbor freight 14 bucks working on it now!!
Thanks so much Simon.. love your channel ❤👍👍👍
for sure the best ammo can building video i have seen. never thought about that spring function. thanks
this built looks perfect to me! seems like it would be easy to repair or replace components too if they ever get worn out over time
Kiaora from Aotearoa New Zealand watched a few hundred videos this is got to be the best none weld video I've watched so far
Thanks Daniel! 👍
This design is so well thought out and just plain awesome. You are a master with those jig saw circle cuts for sure.
I have no need for one of these, but now I want to make one. Great video!
I got all the components ready, and I just found the best build in this video to apply on my tent wood stove. I also got a sheet of ceramic glass to cut and add to the two sides on the wood stove so I can enjoy the fire while tucked in my sleeping bag. Thank you for sharing this video with us. You got a new subscriber.
That is a handy little bugger. Outstanding planning and implementation. Really well done. Thanks.
The best approach I've seen so far and I love seeing measurements in fractions. Thanks so much
You are a terrific craftsman like most working class Britts you all have god gifted injinuity
I found your video randomly. I liked it and now want to make one myself.
I don't camp or have an ammo can but still want to make one.
Thanks for your video.
Thanks Sean! It’ll make a great talking piece if nothing else! 👍🔥
Genius! And very cheap and easy to build! Thanks for sharing!
Excellent job making a small tent stove from a ammo can. Love your channel. Be safe, stay healthy, God Bless everyone.
Wow! All I can say is WOW! Great design and amazing detail in the how to. Thank you for sharing this! I look forward to giving it a try
That's the best I've seen, I don't see how it could be any better..
Thank you for sharing
I've seen a lot of these before. But, this video is the BEST description I have ever seen. Thank you Simon
What a class act. My wife and I love you Simon. Binged watched all your videos over the last few weeks. Looks great on a 85 inch Samsung.
Hahaha - thank you!! 😁
Thanks for sharing your skills, thoughts, and knowledge on building a possible live saving device! Have a great life!
Hi Simon I made one of these years ago. For the flue I used 2mm thick stainless steel foil 6 foot long by about 11 inches. You can then roll the foil length ways to make the flue, and roll it width when you store it in the ammo can. Use 2 inch diameter stainless steel rings to hold the flu in shape whilst using it, you will need 6 a least. It is brilliant light weight takes up no space.
I love the idea of using the exhaust pipe as a chimney... a bit heavy, but tolerable.
Wow! Great work, Simon! Thanks for posting this. Very inspiring.
Painting between two bare metal surfaces before riveting on is another thing to add on the next build. Thanks for the ideas!
Dude, that's awesome! Right on and great job explaining the fab process. God bless you and yours.
Wow.. really excellent stove build!
I'll be adding this one to my favorites list!
Some tips for you...
1) The vent in the front is called the "draft".
2) With the new damper installed, you won't need the baffle inside. By removing it you'll gain some inner space and have maximum heat control with the draft & damper combination.
3) Make sure you open the damper fully before you open the door. You won't get smoked out that way.
Thanks for the Awesome video...
Thank you! The tips are hugely appreciated- I’ll try it without the baffle plate. 👍
I don't understand why you need both, instead of one or the other? If the draft is wide open wouldn't the dampener partially closed choke the fire, or the dampener open but the draft partially closed do the same thing?
@@mikie2501
You would only choke the fire out if either one is closed too far.
A fire needs to breathe. It inhales via the draft & exhales via the damper & chimney. The draft is always necessary in some form.. the fire won't burn without air. The damper is a mechanism for added control of the fires exhaust. Also.. if you open the damper fully a few seconds before you open the door, you won't get smoke billowing out the front. Slowing down the exhaust allows for maximum heat retention in the stove once it's up to temperature. So by controlling both air in and out, you maximize your heat output.
Love that hole mapping. You can do the same for any opening. Map the corners and connect the dots.
Cordial saludo; Gracias por enseñar conocimiento para todos por igual, la voy a fabricar desde Cali Colombia , felicidades Simon.
Simon, you've been holding out on us. You didn't mention that you are a metal fabricator....and a skilled one, obviously. You are a resourceful creature my friend. That is a bit of fine craftsmanship, excellent presentation, and a great stove. Thank you.
Hahaha - you are too kind! Thank you! 😁
Phenomenal Workmanship
The best ammocan video on youtube,,, Thanx Simon...
Great build n love the old pot belly stove in the shop pure vintage 👍
Only just seen this video, as usual very good content I made a similar stove/burner when I was a younger man, these old ammo containers have so many uses,Simon u r an inspiration to old and young alike ,many thanks
Wish you sold these, by far the best camp stove I've seen!!
Had to watch this again because it must have been alot of work to video this and make the stove at the same time. We appreciate you bud!
Thanks Jeff! 👍
The secondary baffle on wood burners is more about the secondary burn of Co (carbon monoxide), which happens as your smoke hits the very hot plate, releasing the secondary heat, which would have been wasted up the chimney. Love your channel, and thanks for sharing your stove design, and showing us how to build it 😊
Good job Simon a bloke in the workshop.
All we need now is a winter and you can test it out.
Hahaha - I know!! Mind you it’s been a bit nippy the past few days! 🥶
Simon, you are the coolest.