There is not a way to make this particular pendant without "harming" the picture, no matter what you do you will need to glue the cabochon to it. I would suggest not using the original picture but instead making a copy of it. Most glues will yellow after some period time, sometimes it may take 10 years, but eventually most glues will yellow to some extent.
Hi! I am glad you are having fun! Yes, you can absolutely do this project with Ice Resin. Just make sure to seal your image properly - I always paint 3 coats of sealant over the image before applying the resin (letting each coat dry thoroughly between applications).
@007Saby I prefer Crafter's Pick since it is a bit thicker then Mod Podge and more "glue" like. However, I also believe there is more then 1 way to do most things and Mod Podge would probably work as well.
I have not heard of this but it makes a lot of sense. If the surface is not 100% flat, then a little air or gap will occur and could cause this look. Tell your friend thanks! I think she might have nailed it.
Thanks for the compliment! I would say it is water-resistant but not waterproof - meaning that I would not worry about wearing it if it was raining, but I would not go swimming with it. I would definitely not submerge the piece in water. As for laminating, I don't think the Crafter's Pick glue would end up sticking to the laminated surface, however the Diamond Glaze might stick but you would need to test it. E6000 might be a better bet. You will need to do some experimenting.
I have not experienced Diamond Glaze yellowing but I have heard that it can yellow over time if applied in a thick layer and exposed to prolonged periods of direct sunlight.
@jazfig You would not want to submerge this piece in water however it should be ok standing up to normal wear and tear. The image is being sealed and the glues/sealers are water resistant. You should not experience running or melting with normal wear. I would suggest taking off any piece of jewelry before showering or bathing.
So many videos Ive watched yours came out the best I struggled with having glue spots using super glue and the resin method this was a great method good job love
This question comes up quite a bit and many people have found success using the Diamond Glazes for both steps. I tend to use Crafter's Pick for adhering the image/cabochon to the bezel just because it tends to not saturate the image as much and I feel more secure that I will get my desired result each time. Crafter's Pick is also very strong when dry. That stated, a lot of people are totally comfortable with Diamond Glaze.
@kelmarie1985 The diamond glaze is actually going to seal the image for you in addition to adhering the glass cabochon to it. One thing to be cautious of though is that some photo papers bleed badly when any type of liquid is applied to them - glue, sealant, mod podge, diamond glaze, resin, etc... Also, some photo papers do not "take" sealants or glazes well and actually can cause the glass cabochon to pop off.
I use sealant so that the colors remain true and bright and also so that there is some water-resistance in case the piece gets wet. If you do not use a sealant, your images will most likely darken in some capacity. If using glass tiles, I have found that 1 coat of sealant is ok. If using resin, you must apply 3 coats of sealant.
Hi! I always like to seal my images for two reasons - one to keep the colors from running, and two, to keep the colors intense. I find that if I don't seal, the colors just do not look as vibrant. I always use Nunn Sealant as well. As to the cracked effect showing up a week later, that is perplexing. Usually if there is a problem, it will show up much earlier in the process. It honestly sounds like you are doing everything right. Have your new pendants shown signs of cracking?
Thank you so much for this video! I've been making rings with glass cabochons but up until now I've been getting these terrible-looking air bubbles under the glass. I got some great tips from this video, thanks a lot!
If you are laminating the paper first, I would definitely try substituting the E6000 for the Crafters Pick. Try an experiment and see if the Diamond Glaze will still work, I think you will be happier with the results. If the Diamond Glaze does not work with the lamination, then try the E6000.
I’m glad the diamond glue is water based. I’m having a hard time getting the right amount of glue to spread correctly, so if I mess up, I just soak the glass, remove the paper, dry and try again. I printed out multiples to practice. 👍🏼❤️
Since I didn’t have any heavier paper handy, I laminated my sheets. It does take much longer for the glaze to dry, but it works. Also, I accidentally found that if I leave just a tiny bit of the paper I’m cutting around, it definitely stays put in the tray.
@Beadaholique Because of this, I like to print out my photos on a card stock paper (non-glossy) and then proceed with my project. You can definitely give it a try with the photo printed from Walmart, but if it does not work, then try with the image printed on card stock. To reclaim your glass cabochon if you do go through all the steps and the photo does not work, you can remove any dried diamond glaze with nail polish remover. Best of luck!
@kelmarie1985 Hmmmm... honestly I am not sure since I have not worked with matte photo paper very much. I think you will have a better chance then if it was a high gloss. I would love to hear how it comes out, matte photo paper might be a good alternative to card stock.
Hi! I am not familiar with Triple Gloss Decoart so unfortunately I can not say if it will work or not. E6000 is going to be too thick of a glue for this project. The next closest "glue" would be Mod Podge although several people have reported issues with Mod Podge in this type of application. If I could not get Diamond Glaze, I would opt for Mod Podge. Best of luck!
Hi! I didn't see a link to the epson paper, but usually epson is a good choice. I would just recommend a heavier stock if possible, it makes it so the glue absorbs better and does not cause a rippling effect. I actually also prefer "regular" white paper vs. photo paper. I have found that photo paper can create weird glares under the glass and can also sometimes bleed.
Hi! I would not recommend getting this project wet. If you want a necklace with a similar look, you can use the same bezel and image, but apply resin over the top instead of the glass dome. We have a video on Beadaholique . com in our Mixed Media Techniques video section on how to use resin.
Could the finished piece be set in epoxy resin? I make pine needle basket centers, similar to those in which resin is poured over agate slices, allowing the resin to flow beyond the item. It is then trimmed away to approx 1/4" contour and holes are drilled around the perimeter for stitching pine needles. Hope that makes sense. Great video, thanks.
artgal7 What you do sounds lovely! Yes, you could use resin for this project. Just make sure to coat your image in 3 coats of sealant before you apply the resin. I like Nunn Design sealant for this application.
You could try running a line of diamond glaze around the outer edge of the glass (onto the paper) and letting it dry completely and then cutting it out. I can't promise that this will work, but it's the only thing that I can think of. I hope this works!
I would not recommend E6000 for this project, but Diamond Glaze to glue the image to the glass and then Crafters Pick to glue the image/glass to the metal bezel. If you are sealing your images first, try Nunn Sealant - this is best for images you print on your home printer. For the crystalization, try letting your sealant dry overnight before going onto the next step. Best of luck!
If I am using my inkjet printer do I need to seal the image first? Also I want to glue a flat bail or a magnet on the back instead of a cabochon tray. Is the cardstock strong enough for that ? Do I need to do something else to the back to attach the bail or magnet?
There are lots of different ways to make a project such as this. I have tried Mod Podge & have more issues with it then with the Diamond Glaze (streaking, paper warping, etc). Other people prefer Mod Podge. It really is a matter of experimenting & seeing what works best for you. I prefer not to use photos printed from the lab because they are usually coated and shiny, which affects how the adhesive adheres to the image. I have had the most success with using a heavier weight matte white paper.
I've had this issue where after I glue my glass into place and usually let it dry over night and then cut around my glass the picture lifts from the diamond glaze (not completely but a little). I'ts terrible, it creates this cloudy effect all over my cabochon image. I've tried everything. The cloudiness is my biggest issue. Any tips?
Hello first off I would like to thank you for this video !!! I am looking to make some of these to put as remembrance charms on my wedding bouquet. I'm not incredibly crafty but it seems easy enough. I was just wondering if you would be able to use the diamond glaze when attaching the cabachon to the bezel instead of the crafters pick glue ? Thank you
@deedeegum Hi! What sealant and glue are you using? Also, are you in a place where there might be strong temperature fluctuations? Any more details would help.
So nice to know these things, as I was wondering about which glue (s) to use for DIY glass cabochon pendants etc. I am waiting on a few orders for DIY projects. So now I will be far better prepared to do this work correctly. Thank you very much for your how to videos. I was wondering, is there any way to remove these glass domes so as to change the image out ? tia 👍👍😀
This particular project isn't easily adaptable to a removable design. With this style of bezel and cabochon glue is really the only thing holding everything together so you have to use a good amount, essentially sandwiching the photo between two layers of glue. Any attempt the weaken the glue's hold after it's dried is likely to harm the photo I'm afraid.
Hi! They seem to be perfect, but I didn´t applied the sealant... I have to make another pendant with the sealant to see what happen, do you think that it´s enough with just one layer of sealant? I used to add 3 layers, is it too much? Thanks ! :)
Wonderful tutorial :-) Going to be making this very soon! I'm going to be using an image with photo paper that was printed at Walmart....will putting Mod Podge help protect the image when doing this project?
Hi Julie, I am new to Beadaholique but am having a great time with what I have purchased. For this project would we be able to use ice resin in a bezel after sealing? Thank you
Hi!! thanks for your answer! :) I´m using nun design sealant n glue for the pendants. This week I used a more heavy cardstock and didn´t apply sealant to the images (as you do in this video), it seems that my pendants are fine, but as this crack effect came out a week later, I´m afraid that could appear again... also in other ocassion I made some scrabble pendants without using the sealant, and one day started to rain suddenly and the ink run out...could this happen to my new pendants?
I've heard diamond glaze can yellow after awhile, is this true? & if so, what would be a better alternative to attach the glass cabochon to the picture without harming it in any way?
I'm having exactly the same problem as deedeegum and maffy118 where there is a kind of crystallization behind the glass and can't work out what to do. E6000 seems to be the recommended glue but it seems to be when this dries out and after a few days. Have you managed to resolve the issue. I am printing images onto paper - would you recommend the epson paper below? and then I seal it with modge podge. I wondered if it was the modge podge interacting with the glue? Any advise would be great!
Thanks so much for sharing! I was just wondering if I can use real photos from the lab, and also why some tutorials use modge podge on their printed images? thank you!
Diamond Glaze is the only product that I have found to work for this application. That said, it is always good to experiment and you can try other products that you might find.
Hi! thanks so much for sharing this video! I was trying to make some pendants with this technique, at first they seem to be ok but after a few days when they dry more, some "bubbles" came out over the images, they look like "cracked" and they look awful :( ... I don´t know why... I protected the images with sealant, as you say in other tutorials, so I don´t think it´s the ink... why is happening this? any help would be great! I don´t know what else to do... Thanks!!!! :)
First time trying to make pendants. I used six thousand glue for the picture to the glass and to adhere to the pendant. They looked great at first , but after about six hours quite a few of them started to get foggy. Any idea why this occured?
@UtahGmaw99 You can get them on Beadaholique's website. The links for the supplies in this video including the Oval Bezel W/ Glass Oval Cabochon is located in the video description underneath the video
P.S. I'm using a glue similar to Diamond Glaze (Sun and Moon glue from Etsy) and Epson Presentation Paper, which is a thick stock paper for my inkjet printer. I appreciate your advice!
We've got a few different styles in stock right with prices from prices starting at $1:50 at the moment beadaholique.com/search?type=product&q=Glass+Cabochon+%22Pendant+Set%22
We're all about supplies so we don't sell finished pieces ourselves. For selling your finished pieces there are a few rules to keep in mind: Handmade jewelry can vary a lot by price. But in general you should figure out how much your labor is worth per hour and then add together the time it took the make the piece, the cost of your materials, and then add a little bit to help pay down the investment you've made in tools and any other costs such as renting a booth or a table at a show. One you've added those numbers together multiply the result by 3. That should be your sale price. In some circumstances the right price might be less then that, and in others it might be more. It's helpful to look at various markets, both online in places like Etsy, and local craft fares (When those open up again) and get a sense of what people are charging locally for the work you're interested in doing. You can and should sell to different markets for different prices.
You can get the supplies on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath the video.
@Beadaholique (Julie): This was the best Cabochon tutorial I've seen. Two questions for you. 1. Once completely dry, is the finished product waterproof? 2. If I were to print out a design and get it laminated before gluing and cutting it, do you think that would interfere with the diamond glaze and crafters pic. Cheers, Nathan
We do not sell Aleene's so I can't look at the label, however, I believe it dissolves in water. Crafter's Pick creates a water resistant bond. You will just need to look at the labels and see what they both do and don't do and how they will work in your particular application.
I have unfortunately not worked with hair before so I am not really the right person to give advice on how to incorporate it into a project such as this, I am sorry.
I've been having a similar issue to Deedeegum. Sometimes my images will come out perfect, meaning no bubbles, but other times I get a strange streaking effect. Deedee called it a "cracked" effect, but it looks more like a small area where the image did not adhere to the glass. It can look like a crystalization. I'm an Etsy seller, and one of my peers said she discovered that her cabochon surfaces were actually a little uneven, which she believed accounted for the problem. Have you heard of this?
Hi there, wander if anyone can help me! I can't find Diamond Glaze in England- but I have Triple Gloss Decoart and E6000, will either of these work for gluing the image to the glass? Thanks!
That should still work as long as it's not photo paper. We recommend trying it out as a test, but we do recommend a heavier paper if possible. Thanks again!
What glue can you use to stop the inc from running? Say a customer accidentally gets there neclace wet and it makes inc run . How do you stop that? Or is it there loss because they got it wet ?
I would recommend Diamond Glaze, this will be your best bet against accidental water damage. However, these are not meant to get wet. If you want something that has a similar look and is waterproof, I would suggest using resin. Resins and Glazes www.beadaholique.com/c-62448-resins-and-glazes.aspx?UA-cam&
The issue is going to be using a glue like E6000 on the back of your photo. It is better to use a white glue to adhere the photo. If you want to use a jewelry cement, I would recommend sealing the back of the photo first, but I can't say how that will turn out, so do some experimenting first.
+Kassandra Chavez I am hesitant to use regular photos for a couple reasons - one, if the project does not turn out "right", then a real photo will have been sacrificed, and two, real photos tend to have a glossy film on them which sometimes can cause shiny streaks to appear when the diamond glaze and glass dome are applied. That said, I am a firm believer in experimenting and if you have a spare photo that you are okay with perhaps losing, then I say go for it and give it a try.
We use the diamond glaze to seal the photo and glue it to the glass, and the crafter's pick to glue to the photo to the metal bezel. You could use the diamond glaze for both if you like, but in our experience the crafter's pick lays flatter and holds stronger to metal.
Thank you for your how-to video. It has been very helpful. I need your recommendation on laser printers. Our printer is old and we have just started making photo jewelry. I've heard you can actually save money, in the long run, on toner versus ink cartridges as well. Which printer do you use or recommend for your jewelry making?
+Little Hawk Items For Sale I do a lot of photo and collage art jewelry but I've never owned a laser printer for it. Honestly for high quality printing I use a FedEx/Kinkos or other print store. I often work with smaller photo images and I've found I can create an image in photoshop that fits 40 or 50 of them onto a single sheet of paper.
The links for the supplies in this video are located in the video description underneath the video. Click on the link for the Keepsake Photo Pendant Necklace - Project N637 and you'll find a list there.
Hiya, great video! Do you know where I could buy a heart shape cabochon which doesn't distort peoples faces in the photos? Every one I buy doesn't seem to work with photos as it makes their faces longer/shorter etc. I know the circles work best but I would love to use hearts! Thanks :)
Hi! I would really like to buy this Silver Plated Oval Bezel W/ Glass Oval Cabochon, but I cannot find it on the web site. Even if I click on the link below it says Oops!
I am sorry but I do not know how you would go about making your own mod podge or diamond glaze. Beadaholique does ship to Indonesia but I do know that customs does sometimes have issue with liquid glues, you can contact our customer service reps for more information service@beadaholique . com
Audrey Ngu The glass things are glass oval cabochons, we sell them in many different kits with matching bezels like you see in the video www.beadaholique.com/c-63823-bezel-pendant-kits.aspx?UA-cam& and we also sell the cabochons on their own in a few different sizes www.beadaholique.com/c-63504-oval.aspx?UA-cam&
These are an old favorite of ours, and we still sell them. You can find them on our site here: www.beadaholique.com/p-38430-silver-plated-oval-bezel-with-glass-oval-cabochon-22x30mm-pendant-kit.aspx
I have done this 5 times today, and every time it looks good, and a few minutes later the photo runs away and bleeds color, and/or dries cloudy. I'm using clear diamond glaze. I've tried photo paper glossy, matte, and cardstock. any tips?
Try multiple coats of the diamond glaze. We usually do 3 coats. If that doesn't work you can try a different sealant like Swellegant beadaholique.com/products/clear-sealant-1-ounce-bottle-matte-finish-by-swellegant
There is not a way to make this particular pendant without "harming" the picture, no matter what you do you will need to glue the cabochon to it. I would suggest not using the original picture but instead making a copy of it. Most glues will yellow after some period time, sometimes it may take 10 years, but eventually most glues will yellow to some extent.
Hi! I am glad you are having fun! Yes, you can absolutely do this project with Ice Resin. Just make sure to seal your image properly - I always paint 3 coats of sealant over the image before applying the resin (letting each coat dry thoroughly between applications).
@007Saby I prefer Crafter's Pick since it is a bit thicker then Mod Podge and more "glue" like. However, I also believe there is more then 1 way to do most things and Mod Podge would probably work as well.
I have not heard of this but it makes a lot of sense. If the surface is not 100% flat, then a little air or gap will occur and could cause this look. Tell your friend thanks! I think she might have nailed it.
Thanks for the compliment! I would say it is water-resistant but not waterproof - meaning that I would not worry about wearing it if it was raining, but I would not go swimming with it. I would definitely not submerge the piece in water. As for laminating, I don't think the Crafter's Pick glue would end up sticking to the laminated surface, however the Diamond Glaze might stick but you would need to test it. E6000 might be a better bet. You will need to do some experimenting.
I have not experienced Diamond Glaze yellowing but I have heard that it can yellow over time if applied in a thick layer and exposed to prolonged periods of direct sunlight.
@jazfig You would not want to submerge this piece in water however it should be ok standing up to normal wear and tear. The image is being sealed and the glues/sealers are water resistant. You should not experience running or melting with normal wear. I would suggest taking off any piece of jewelry before showering or bathing.
great easy to follow...wanting to make a pet photo....thanks.
So many videos Ive watched yours came out the best I struggled with having glue spots using super glue and the resin method this was a great method good job love
We are so happy to hear this video helped! Thanks so much for watching!
Hi! I find that Diamond Glaze is a more secure bond and clearer. However, if you have Mod Podge, feel free to experiment.
This question comes up quite a bit and many people have found success using the Diamond Glazes for both steps. I tend to use Crafter's Pick for adhering the image/cabochon to the bezel just because it tends to not saturate the image as much and I feel more secure that I will get my desired result each time. Crafter's Pick is also very strong when dry. That stated, a lot of people are totally comfortable with Diamond Glaze.
@kelmarie1985 The diamond glaze is actually going to seal the image for you in addition to adhering the glass cabochon to it. One thing to be cautious of though is that some photo papers bleed badly when any type of liquid is applied to them - glue, sealant, mod podge, diamond glaze, resin, etc... Also, some photo papers do not "take" sealants or glazes well and actually can cause the glass cabochon to pop off.
I use sealant so that the colors remain true and bright and also so that there is some water-resistance in case the piece gets wet. If you do not use a sealant, your images will most likely darken in some capacity. If using glass tiles, I have found that 1 coat of sealant is ok. If using resin, you must apply 3 coats of sealant.
Hi!
I always like to seal my images for two reasons - one to keep the colors from running, and two, to keep the colors intense. I find that if I don't seal, the colors just do not look as vibrant. I always use Nunn Sealant as well. As to the cracked effect showing up a week later, that is perplexing. Usually if there is a problem, it will show up much earlier in the process. It honestly sounds like you are doing everything right. Have your new pendants shown signs of cracking?
Thank you so much for this video! I've been making rings with glass cabochons but up until now I've been getting these terrible-looking air bubbles under the glass. I got some great tips from this video, thanks a lot!
If you are laminating the paper first, I would definitely try substituting the E6000 for the Crafters Pick. Try an experiment and see if the Diamond Glaze will still work, I think you will be happier with the results. If the Diamond Glaze does not work with the lamination, then try the E6000.
Wonderful tutorial! Very easy to follow. Thank you for taking the time to share your ideas. Xoxo
I’m glad the diamond glue is water based. I’m having a hard time getting the right amount of glue to spread correctly, so if I mess up, I just soak the glass, remove the paper, dry and try again. I printed out multiples to practice. 👍🏼❤️
That's really smart, a little bit of practice beforehand is often so helpful with techniques like this.
Since I didn’t have any heavier paper handy, I laminated my sheets. It does take much longer for the glaze to dry, but it works. Also, I accidentally found that if I leave just a tiny bit of the paper I’m cutting around, it definitely stays put in the tray.
@@seeking.harmony Those are great tips, glad your project turned out well!
@Beadaholique Because of this, I like to print out my photos on a card stock paper (non-glossy) and then proceed with my project. You can definitely give it a try with the photo printed from Walmart, but if it does not work, then try with the image printed on card stock. To reclaim your glass cabochon if you do go through all the steps and the photo does not work, you can remove any dried diamond glaze with nail polish remover. Best of luck!
@kelmarie1985 Hmmmm... honestly I am not sure since I have not worked with matte photo paper very much. I think you will have a better chance then if it was a high gloss. I would love to hear how it comes out, matte photo paper might be a good alternative to card stock.
Hi! I am not familiar with Triple Gloss Decoart so unfortunately I can not say if it will work or not. E6000 is going to be too thick of a glue for this project. The next closest "glue" would be Mod Podge although several people have reported issues with Mod Podge in this type of application. If I could not get Diamond Glaze, I would opt for Mod Podge. Best of luck!
Hi! I didn't see a link to the epson paper, but usually epson is a good choice. I would just recommend a heavier stock if possible, it makes it so the glue absorbs better and does not cause a rippling effect. I actually also prefer "regular" white paper vs. photo paper. I have found that photo paper can create weird glares under the glass and can also sometimes bleed.
Hi! I would not recommend getting this project wet. If you want a necklace with a similar look, you can use the same bezel and image, but apply resin over the top instead of the glass dome. We have a video on Beadaholique . com in our Mixed Media Techniques video section on how to use resin.
Very nice! ⭐️
Thanks!
Could the finished piece be set in epoxy resin? I make pine needle basket centers, similar to those in which resin is poured over agate slices, allowing the resin to flow beyond the item. It is then trimmed away to approx 1/4" contour and holes are drilled around the perimeter for stitching pine needles. Hope that makes sense.
Great video, thanks.
artgal7 What you do sounds lovely! Yes, you could use resin for this project. Just make sure to coat your image in 3 coats of sealant before you apply the resin. I like Nunn Design sealant for this application.
Beadaholique Thanks so much for your reply. I'll give the sealant a try.
You could try running a line of diamond glaze around the outer edge of the glass (onto the paper) and letting it dry completely and then cutting it out. I can't promise that this will work, but it's the only thing that I can think of. I hope this works!
I would not recommend E6000 for this project, but Diamond Glaze to glue the image to the glass and then Crafters Pick to glue the image/glass to the metal bezel. If you are sealing your images first, try Nunn Sealant - this is best for images you print on your home printer. For the crystalization, try letting your sealant dry overnight before going onto the next step. Best of luck!
If I am using my inkjet printer do I need to seal the image first? Also I want to glue a flat bail or a magnet on the back instead of a cabochon tray. Is the cardstock strong enough for that ? Do I need to do something else to the back to attach the bail or magnet?
There are lots of different ways to make a project such as this. I have tried Mod Podge & have more issues with it then with the Diamond Glaze (streaking, paper warping, etc). Other people prefer Mod Podge. It really is a matter of experimenting & seeing what works best for you. I prefer not to use photos printed from the lab because they are usually coated and shiny, which affects how the adhesive adheres to the image. I have had the most success with using a heavier weight matte white paper.
I've had this issue where after I glue my glass into place and usually let it dry over night and then cut around my glass the picture lifts from the diamond glaze (not completely but a little). I'ts terrible, it creates this cloudy effect all over my cabochon image. I've tried everything. The cloudiness is my biggest issue. Any tips?
Sorry about that. I just fixed the link. It should work now.
Hello first off I would like to thank you for this video !!! I am looking to make some of these to put as remembrance charms on my wedding bouquet. I'm not incredibly crafty but it seems easy enough. I was just wondering if you would be able to use the diamond glaze when attaching the cabachon to the bezel instead of the crafters pick glue ? Thank you
@deedeegum Hi! What sealant and glue are you using? Also, are you in a place where there might be strong temperature fluctuations? Any more details would help.
Hi! I was wondering if you know any ways to preserve a lock of hair behind a piece of glass like in this project.
Thank you for the advice! Do you suggest E6000 as a replacement for the Crafter's Pick or the Diamond Glaze? or both?
Love this! Where do you buy the settings.
So nice to know these things, as I was wondering about which glue (s) to use for DIY glass cabochon pendants etc. I am waiting on a few orders for DIY projects. So now I will be far better prepared to do this work correctly. Thank you very much for your how to videos. I was wondering, is there any way to remove these glass domes so as to change the image out ? tia 👍👍😀
This particular project isn't easily adaptable to a removable design. With this style of bezel and cabochon glue is really the only thing holding everything together so you have to use a good amount, essentially sandwiching the photo between two layers of glue. Any attempt the weaken the glue's hold after it's dried is likely to harm the photo I'm afraid.
Hi!
They seem to be perfect, but I didn´t applied the sealant... I have to make another pendant with the sealant to see what happen, do you think that it´s enough with just one layer of sealant? I used to add 3 layers, is it too much?
Thanks ! :)
Wonderful tutorial :-) Going to be making this very soon! I'm going to be using an image with photo paper that was printed at Walmart....will putting Mod Podge help protect the image when doing this project?
Hi Julie,
I am new to Beadaholique but am having a great time with what I have purchased. For this project would we be able to use ice resin in a bezel after sealing? Thank you
amazing! when you're doing it, it looks so easy ^^
Hi!! thanks for your answer! :) I´m using nun design sealant n glue for the pendants. This week I used a more heavy cardstock and didn´t apply sealant to the images (as you do in this video), it seems that my pendants are fine, but as this crack effect came out a week later, I´m afraid that could appear again... also in other ocassion I made some scrabble pendants without using the sealant, and one day started to rain suddenly and the ink run out...could this happen to my new pendants?
I've heard diamond glaze can yellow after awhile, is this true?
& if so, what would be a better alternative to attach the glass cabochon to the picture without harming it in any way?
I'm having exactly the same problem as deedeegum and maffy118 where there is a kind of crystallization behind the glass and can't work out what to do. E6000 seems to be the recommended glue but it seems to be when this dries out and after a few days. Have you managed to resolve the issue. I am printing images onto paper - would you recommend the epson paper below? and then I seal it with modge podge. I wondered if it was the modge podge interacting with the glue? Any advise would be great!
Thanks so much for sharing! I was just wondering if I can use real photos from the lab, and also why some tutorials use modge podge on their printed images? thank you!
Diamond Glaze is the only product that I have found to work for this application. That said, it is always good to experiment and you can try other products that you might find.
Wow perfectly done 👍
temperature it´s normal, not too much fluctuactions.
Thanks for your help! :)
Hi! thanks so much for sharing this video!
I was trying to make some pendants with this technique, at first they seem to be ok but after a few days when they dry more, some "bubbles" came out over the images, they look like "cracked" and they look awful :( ... I don´t know why... I protected the images with sealant, as you say in other tutorials, so I don´t think it´s the ink... why is happening this? any help would be great! I don´t know what else to do...
Thanks!!!! :)
Do you know if Aleene's Jewelry pendant gel would work for this?
Hi would you have just made the image smaller if you wanted too use that entire image?
That is correct. We recommend using photo editing software or a photo copier to enlarge or reduce images. Thank you.
@Beadaholique Thank you so much!!! And I sure will let you know how it comes out :-)
My best recommendation is to do a test piece first and see what happens and never use original photos, always copies.
First time trying to make pendants. I used six thousand glue for the picture to the glass and to adhere to the pendant. They looked great at first , but after about six hours quite a few of them started to get foggy. Any idea why this occured?
@UtahGmaw99 You can get them on Beadaholique's website. The links for the supplies in this video including the Oval Bezel W/ Glass Oval Cabochon is located in the video description underneath the video
Can Aleene's Tacky Glue be used as an alternative to Crafter's Pick glue?
P.S. I'm using a glue similar to Diamond Glaze (Sun and Moon glue from Etsy) and Epson Presentation Paper, which is a thick stock paper for my inkjet printer. I appreciate your advice!
Is there a product list for the project somewhere?
Where can we get that type of glass in difftent shape?😊
Hi! We sell them, some are out of stock right now but will hopefully get restocked soon beadaholique.com/search?type=product&q=clear+glass+cabochon
@@beadaholique thank you so much 😊 love from Nepal 🇳🇵🙏
I have photos I got printed at walmart, what glue should I use? I dont have access to a printer to copy pictures.
I love the these.....how much do these cost
We've got a few different styles in stock right with prices from prices starting at $1:50 at the moment beadaholique.com/search?type=product&q=Glass+Cabochon+%22Pendant+Set%22
Oh I should of been a little clearer,I was talking about after you make the pendants,how much are they or what would you sell them for
We're all about supplies so we don't sell finished pieces ourselves. For selling your finished pieces there are a few rules to keep in mind: Handmade jewelry can vary a lot by price. But in general you should figure out how much your labor is worth per hour and then add together the time it took the make the piece, the cost of your materials, and then add a little bit to help pay down the investment you've made in tools and any other costs such as renting a booth or a table at a show. One you've added those numbers together multiply the result by 3. That should be your sale price.
In some circumstances the right price might be less then that, and in others it might be more. It's helpful to look at various markets, both online in places like Etsy, and local craft fares (When those open up again) and get a sense of what people are charging locally for the work you're interested in doing. You can and should sell to different markets for different prices.
would mod podge gloss work the same as the diamond glaze?
@Beadaholique The photos I had printed are on matte photo paper...is that okay...?
You can get the supplies on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath the video.
@Beadaholique (Julie): This was the best Cabochon tutorial I've seen. Two questions for you.
1. Once completely dry, is the finished product waterproof?
2. If I were to print out a design and get it laminated before gluing and cutting it, do you think that would interfere with the diamond glaze and crafters pic.
Cheers,
Nathan
We do not sell Aleene's so I can't look at the label, however, I believe it dissolves in water. Crafter's Pick creates a water resistant bond. You will just need to look at the labels and see what they both do and don't do and how they will work in your particular application.
I have unfortunately not worked with hair before so I am not really the right person to give advice on how to incorporate it into a project such as this, I am sorry.
I've been having a similar issue to Deedeegum. Sometimes my images will come out perfect, meaning no bubbles, but other times I get a strange streaking effect. Deedee called it a "cracked" effect, but it looks more like a small area where the image did not adhere to the glass. It can look like a crystalization. I'm an Etsy seller, and one of my peers said she discovered that her cabochon surfaces were actually a little uneven, which she believed accounted for the problem. Have you heard of this?
can i use mod podge instead of crafters pick?
Hi there, wander if anyone can help me! I can't find Diamond Glaze in England- but I have Triple Gloss Decoart and E6000, will either of these work for gluing the image to the glass?
Thanks!
If I used 110 lb. Cardstock, will it work the same? I can't find the same one as you.
It will work the same. We recommend 80lb or heavier cardstock. Thanks for watching!
Beadaholique I think I actually got 65... Is that not good enough?
That should still work as long as it's not photo paper. We recommend trying it out as a test, but we do recommend a heavier paper if possible. Thanks again!
What glue can you use to stop the inc from running? Say a customer accidentally gets there neclace wet and it makes inc run . How do you stop that? Or is it there loss because they got it wet ?
I would recommend Diamond Glaze, this will be your best bet against accidental water damage. However, these are not meant to get wet. If you want something that has a similar look and is waterproof, I would suggest using resin.
Resins and Glazes
www.beadaholique.com/c-62448-resins-and-glazes.aspx?UA-cam&
Mod Podge Dimensional Magic is different but is used in much the same way.
Could you recommend a waterproof glue to use when gluing the cabochon to the bezel? I'm having a little trouble finding one. Thank you!
The issue is going to be using a glue like E6000 on the back of your photo. It is better to use a white glue to adhere the photo. If you want to use a jewelry cement, I would recommend sealing the back of the photo first, but I can't say how that will turn out, so do some experimenting first.
How do you resize and reshape the photos?
Where can I buy the first pendent blank you grabbed
You can find those items here: www.beadaholique.com/wsearch/result/?type_id=&q=bezel%20with%20glass%20cabochon%20round%20
could you use the regular photos or does it have to be printed out on paper
+Kassandra Chavez I am hesitant to use regular photos for a couple reasons - one, if the project does not turn out "right", then a real photo will have been sacrificed, and two, real photos tend to have a glossy film on them which sometimes can cause shiny streaks to appear when the diamond glaze and glass dome are applied. That said, I am a firm believer in experimenting and if you have a spare photo that you are okay with perhaps losing, then I say go for it and give it a try.
+Beadaholique thanks so much 😃
hi, why not use diamond to seal the pendant ?
We use the diamond glaze to seal the photo and glue it to the glass, and the crafter's pick to glue to the photo to the metal bezel. You could use the diamond glaze for both if you like, but in our experience the crafter's pick lays flatter and holds stronger to metal.
Thank you for your how-to video. It has been very helpful. I need your
recommendation on laser printers. Our printer is old and we have just
started making photo jewelry. I've heard you can actually save money, in
the long run, on toner versus ink cartridges as well. Which printer do
you use or recommend for your jewelry making?
+Little Hawk Items For Sale I do a lot of photo and collage art jewelry but I've never owned a laser printer for it. Honestly for high quality printing I use a FedEx/Kinkos or other print store. I often work with smaller photo images and I've found I can create an image in photoshop that fits 40 or 50 of them onto a single sheet of paper.
+Beadaholique Good information all the way around! - Thanks
The links for the supplies in this video are located in the video description underneath the video. Click on the link for the Keepsake Photo Pendant Necklace - Project N637 and you'll find a list there.
Hiya, great video! Do you know where I could buy a heart shape cabochon which doesn't distort peoples faces in the photos? Every one I buy doesn't seem to work with photos as it makes their faces longer/shorter etc. I know the circles work best but I would love to use hearts! Thanks :)
You can find the ones that we sell at: www.beadaholique.com/c-63820-other.aspx?UA-cam&
Beadaholique Thanks!
What printer can I use for this? Is an ordinary printer is okay?
Inkjet is fine, but we recommend using card stock as photo-paper can cause streaks with adhesives and resin. Thanks for watching.
will this work with a laser printer?
Yes, it should work with a laser printer.
Hi! I would really like to buy this Silver Plated Oval Bezel W/ Glass Oval Cabochon, but I cannot find it on the web site. Even if I click on the link below it says Oops!
love the video thank u
I am sorry but I do not know how you would go about making your own mod podge or diamond glaze. Beadaholique does ship to Indonesia but I do know that customs does sometimes have issue with liquid glues, you can contact our customer service reps for more information service@beadaholique . com
Where can you find the glass things?
Audrey Ngu The glass things are glass oval cabochons, we sell them in many different kits with matching bezels like you see in the video www.beadaholique.com/c-63823-bezel-pendant-kits.aspx?UA-cam& and we also sell the cabochons on their own in a few different sizes www.beadaholique.com/c-63504-oval.aspx?UA-cam&
What kind of paper did u use
A matte photo presentation paper. 110 lb weight.
that's very cool .. thank you for sharing with us :D
can it go into water?
hi beadaholic xox
where can i get the glass and silver holders from?
These are an old favorite of ours, and we still sell them. You can find them on our site here: www.beadaholique.com/p-38430-silver-plated-oval-bezel-with-glass-oval-cabochon-22x30mm-pendant-kit.aspx
I have done this 5 times today, and every time it looks good, and a few minutes later the photo runs away and bleeds color, and/or dries cloudy. I'm using clear diamond glaze. I've tried photo paper glossy, matte, and cardstock.
any tips?
Try multiple coats of the diamond glaze. We usually do 3 coats. If that doesn't work you can try a different sealant like Swellegant beadaholique.com/products/clear-sealant-1-ounce-bottle-matte-finish-by-swellegant
My pictures fade any help would be nice
Excellent!!!!
Hi! I am sorry but I am not versed in that product.
Use a book or something heavy on top of glass while letting it dry over night in order to keep the picture flat so it won't lift.
Thank you!!! :)
I did this in class ;D
Very nice. :]