I once got a new power supply that I mismatched with cables for another power supply, believing that all power supply pin-outs were standardized. Boy was I wrong!! Just because it plugs in doesn't mean it's right. I fried four 8 TB and two 2 TB drives! I wasn't so mad about the drives because I get them for free, but the meticulously organized and cataloged movies, tv shows, and apps that took me decades to collect... yeah, I was pissed about that.
Sometimes we make a awesome Ninja hack,, other times it ended up a awful Ninja F* UP,, I need to rewire my solar panels,, 4 in series is to much,, redo :-/
@@MyPlayHouse I've had a few too many "Ninja f-ups". My server had one x16 PCIe slot and two x8 slots. I tried shaving off the end of the x8s to fit an extra video card. Now I have a single slot and it runs at x2 :(
NVENC is nvidias hardware encoder on their GPUs. When you use it for rendering it ignores some encoding settings that cannot be changed when using nvenc so the output video could be of lower quality depending on the settings you used for the other renders. For a comparison to the other cards you should've used cuda/generic gpu acceleration to get a fair comparison with an identical output.
@@MyPlayHouse In the video there are render templates that have a NVENC counterpart at 13:10. If you chose a non-nvenc one it should just utilize the GPU compute like the other cards did. Thank you for the videos regardless though!
When you said 10k points was nothing, I almost died inside. My server only gets 4 thousand points per day. I guess the lesson here is I need a new GPU for my server. Thanks Morten, watching your videos is going to make me need to empty my wallet.
Thanks for posting! I'm trying to setup a consumer motherboard for two K80 I just took from ...Bargain HW :D My first option was the Gigabyte Aorus Master Z390 that seems to work with on K80 (at 300W), not sure any tests for two K80 tough.
I hate it when they don't make a standard cable, For my Lenovo St550, the cable for the GPU was 325$, I made one for 5$. Also be careful of polarity on cables from Lenovo, the pos and neg is reversed too.. Good video !
something is wrong , ive did 88 wu on folding A home, after 3 day and deloy on linux debian 10 - 2 x RX570-8G and 2 x GTX1650SUPER and 4 x CPU Ryzen : 3800XT , am stll on 88 WU's strange i think folding is broken , and my room went form 18°c to 23°c free heat !!! Nice video.....
Maybe do a Minecraft server test on one of these servers :), Also maybe it wouldnt be a bad idea to modify that mining card (you know, that video from about a week ago) to have a some kind of a air vent in the front and block that hole where the fan was(i mean that part of the card that for example the power connectors are located), so when it doesnt have a fan anymore it would be colled better by the server fans(you know, air passes from the front, through the card, and out at the back. Great video.
Hi, I have dell r730 with Nvidia tesla K80 GPU. I try to do passthrough to window VW through exsi 7.0. The vm don't start? How can I fix it? This is the error from exsi "Module 'DevicePowerOn' power on failed." This after I fixed this issue - "Invalid memory setting: memory reservation (sched.mem.min) should be equal to memsize(131072)." Thanks
I was wondering if your K80 overheats at medium Fan settings(60%). I was able to get it not to overheat only if fans were running 100% on my ML350 Gen9 server under stress test by nvidia DGCM suite. But it is way too loud.
A while back I went to work on an old server. I plugged it in and it was very loud but still bearable. Then I realized it was still switched off, it was just the standby fan running. I turned it on and almost needed to run to a bomb shelter. It was an HP DL360 G4p, if anyone was wondering.
Graphics cards can do other things besides graphics. They're extremely good at calculating certain types of mathematical problems, much better than the main processor, and multiple cards can usually work on the same problem at the same time. The nvidia K80 already has 2 graphics processors on it, so it's basically 2 cards in 1.
Interesting ninja hack video. I had to do the same type of thing in my HP ML350 as I was unable to get any of the correct cables. I couldn't find any anywhere online. I also had to disconnect one of the zero Volt wires and move it. But what still bugs me is you have an Asus server with 2019 Server running......with no errors from the OS regarding lack of resources. Both windows 10 and Server 2019 keep giving me errors with both of my K80 GPUs. Anyone out there been able to resolve a similar issue?
@@MyPlayHouse i did the same but still using only GPU especialy AMD one without CPU i gry better numbers than using even 10% od CPU... Did your own test. CPU is just heating element at this point :) it is something about CPU cycle time share. Better się this power to drive GPU otherwise is just a waste. Maby mąkę a video about testing it :) i did my test with single GPU but with more powerfull CPU ;)
Hi there, enjoyable content you’re performing at your home. Are your company open to recruit personal ?? In case answer was yes, please post details in answer. Otherwise, no problem and thanks anyways 😉
"For fucks sake..."
A sacred chant
Just you be glad, I did not try to sing it. :-)
One nice thing about running Folding@Home is how it heats the house....
Heating@Home :-)
I once got a new power supply that I mismatched with cables for another power supply, believing that all power supply pin-outs were standardized. Boy was I wrong!! Just because it plugs in doesn't mean it's right. I fried four 8 TB and two 2 TB drives!
I wasn't so mad about the drives because I get them for free, but the meticulously organized and cataloged movies, tv shows, and apps that took me decades to collect... yeah, I was pissed about that.
Sometimes only the protecting diodes gets fried and shorted, unsoldering them can make the HDDs to work again.
Sometimes we make a awesome Ninja hack,, other times it ended up a awful Ninja F* UP,,
I need to rewire my solar panels,, 4 in series is to much,, redo :-/
@@MyPlayHouse I've had a few too many "Ninja f-ups". My server had one x16 PCIe slot and two x8 slots. I tried shaving off the end of the x8s to fit an extra video card. Now I have a single slot and it runs at x2 :(
"i'm not a fan of tiny screws" I don't think any of us are :) Great Ninja Hack video, some of my favorites!
I like how we all know the dred, especially when you lose one for eternity... Or lose one inside a piece of equipment, never to be found again.
It would not have taken them much effort to make a way better solution.
You didn’t modify those cables - you ‘Mortenfied’ them... 🤣
a silent Ninja hack :-)
Now it occurred to me why you are excited about this graphics card ... the green is the same shade as the Ryobi tools, hihihihi
I did not think of that :-) good one!
NVENC is nvidias hardware encoder on their GPUs. When you use it for rendering it ignores some encoding settings that cannot be changed when using nvenc so the output video could be of lower quality depending on the settings you used for the other renders. For a comparison to the other cards you should've used cuda/generic gpu acceleration to get a fair comparison with an identical output.
I am not sure I can pick how it renders or how it does it.. :-/
@@MyPlayHouse In the video there are render templates that have a NVENC counterpart at 13:10. If you chose a non-nvenc one it should just utilize the GPU compute like the other cards did. Thank you for the videos regardless though!
@Kevin Clingerman is right, that's why you saw the "Video Engine Load" so high - that's the nvenc hardware encoder.
When you said 10k points was nothing, I almost died inside. My server only gets 4 thousand points per day. I guess the lesson here is I need a new GPU for my server. Thanks Morten, watching your videos is going to make me need to empty my wallet.
10K points is not a lot,, but do not spend money on this,, there need to be a better reason :-) and this can be a bonus..
I'm impressed by your unorthodox approach to various server pr0n issues. Carry on my wayward son! ;)
Hi lennutrajektoor
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Wow I really like those tesla cards. Unfortunately they cost a fortune
All GPU are expensive right now,, if you can even get them ..
Only about $200 now on Ebay because they are worthless for crypto mining.
Thanks for posting! I'm trying to setup a consumer motherboard for two K80 I just took from ...Bargain HW :D My first option was the Gigabyte Aorus Master Z390 that seems to work with on K80 (at 300W), not sure any tests for two K80 tough.
I did not run into any issues using two,, but they were working individually.
Nice Ninja Hack Morten. Great Job
Hi Stephan Schulz
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
I bought 3 for rendering and AI graphics. I LOVE THEM! Iray, octane, Af it's all good.
Hi Brent Polk
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
I hate it when they don't make a standard cable, For my Lenovo St550, the cable for the GPU was 325$, I made one for 5$. Also be careful of polarity on cables from Lenovo, the pos and neg is reversed too.. Good video !
Hi Mr Leamerz
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
something is wrong , ive did 88 wu on folding A home, after 3 day and deloy on linux debian 10 - 2 x RX570-8G and 2 x GTX1650SUPER and 4 x CPU Ryzen : 3800XT , am stll on 88 WU's strange i think folding is broken , and my room went form 18°c to 23°c free heat !!! Nice video.....
:-) Heating@Home thank you for joining in :-)
There's enough place in hell for all of us, Morten. So, don't worry. ;-) Good luck in all your projects! :-)
Hi 999angelas
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Maybe do a Minecraft server test on one of these servers :), Also maybe it wouldnt be a bad idea to modify that mining card (you know, that video from about a week ago) to have a some kind of a air vent in the front and block that hole where the fan was(i mean that part of the card that for example the power connectors are located), so when it doesnt have a fan anymore it would be colled better by the server fans(you know, air passes from the front, through the card, and out at the back. Great video.
Hi technic masters
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Hi,
I have dell r730 with Nvidia tesla K80 GPU. I try to do passthrough to window VW through exsi 7.0.
The vm don't start? How can I fix it?
This is the error from exsi "Module 'DevicePowerOn' power on failed."
This after I fixed this issue - "Invalid memory setting: memory reservation (sched.mem.min) should be equal to memsize(131072)."
Thanks
Happy to hear you got it working..
8:50 - You probably need a PCIe retention bracket on the back for GPUs to hold the K80 better (did it not come with black bracket on 3 screws)?
Hi Anton Kovalenko
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Yes the FAH client 7.6.21 solved my gpu challenges and I'm kicking butt now.
Hi Bert Blankenstein
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
How do you get around the Nvidia licensing on the newer generation cards ?
The GRID K2 and older do not need licensing and anything newer does.
I think You only need that for running vGPU,, but not sure.
I was wondering if your K80 overheats at medium Fan settings(60%). I was able to get it not to overheat only if fans were running 100% on my ML350 Gen9 server under stress test by nvidia DGCM suite. But it is way too loud.
If you put GPU´s in your server,, they need to be in a room fare away :-)
Love ur vids man! :)
Glad you like them!
When you said the noise of the server was soo quiet and then turned it on I was laughing so hard 😂
Lol.....yeah nothing like a bit of Morten sarcasm to brighten your day.😁
I am glad :-) I did talk a bit more quiet,, to really make it good...
A while back I went to work on an old server. I plugged it in and it was very loud but still bearable. Then I realized it was still switched off, it was just the standby fan running. I turned it on and almost needed to run to a bomb shelter.
It was an HP DL360 G4p, if anyone was wondering.
"You won't hear it at all and tuck it under your bed." Hahaha, good one.
Your hoverbed!!!
It was a good joke,, F* it was loud!! :-)
@@MyPlayHouse yes, "Ninja quiet" ROFL.
Are you sure you selected the correct K80 in GPU-Z?
The video editor would only use one of them, right?
I sure hope so :-/
Im not familiar with servers so a simple question, what advantages are there for having several graphics cards in the server ?
Graphics cards can do other things besides graphics. They're extremely good at calculating certain types of mathematical problems, much better than the main processor, and multiple cards can usually work on the same problem at the same time. The nvidia K80 already has 2 graphics processors on it, so it's basically 2 cards in 1.
@@Aggrop0p Thanks for the response. I would have thought modern processors would have been the thing for maths problems but obviously not.
GPU processing power. :-)
You did what had to be done with the pins...
Hi m3gakurv4
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Hello, i want to use it into a gaming pc, but there is no display port, Could someone explain to me how to use it for desktop?
I want to use it at single gpu
Not sure if that is posable,, Linus did something with a mining card,, check that out.
@@MyPlayHouse thanks you veey much
Interesting ninja hack video. I had to do the same type of thing in my HP ML350 as I was unable to get any of the correct cables. I couldn't find any anywhere online.
I also had to disconnect one of the zero Volt wires and move it.
But what still bugs me is you have an Asus server with 2019 Server running......with no errors from the OS regarding lack of resources.
Both windows 10 and Server 2019 keep giving me errors with both of my K80 GPUs.
Anyone out there been able to resolve a similar issue?
Hi The ServerGeek
Thank You very much! Yes I have no resources errors :-)
Thank you for watching! :-)
So... Room for two more K80's...?
That would be so crazy,, 1200Watt of GPU Power!!
THAT OK WE CAN GO TO HELL TOGETHER LOL I MOD STUFF TO IF IT DON'T WORK FOR U MOD IT LEST WE NEVER BE COLD KEEP UP ALL THE GREAT VIDS
Hell it is :-) window seat, non smoker ?
@@MyPlayHouse Sound need smoking and u can have the window seat I Sean hell all read live in NY
I hope your insurance company doesn't watch your videos.
They probably have better things to do.
Hy
You dosen‘t need a Heatpup, you only need 5 GPU server :)
the heat pump is less noisy :-)
@@MyPlayHouse If you want to be adventurous you could water-cool the server and plumb it into your home heating loop.
Dont use cpu for F@H - you will should see increse in gpu scores
I have turned it down to about 80% for the CPU
@@MyPlayHouse i did the same but still using only GPU especialy AMD one without CPU i gry better numbers than using even 10% od CPU... Did your own test. CPU is just heating element at this point :) it is something about CPU cycle time share. Better się this power to drive GPU otherwise is just a waste.
Maby mąkę a video about testing it :) i did my test with single GPU but with more powerfull CPU ;)
Hi there, enjoyable content you’re performing at your home. Are your company open to recruit personal ?? In case answer was yes, please post details in answer. Otherwise, no problem and thanks anyways 😉
No,, I am just a one man band :-)