A little tech tip for painting wheels. Use a deck of playing cards and they slip in the edge of the wheel and then it masks it off super fast and then you can put tape around the outside edge to cover the rest of the tire.
On the next episode at Oakes' garage RJ goes looking for dwarfs in the Kei truck. BHall becomes the first BMW owner to ever use turn signals. Jimmy starts the KA--T swap on the S15.
"KA-T swap the S15." That's like Rob Dahm doing the 13B-REW swap on the C5 Z06. And it will be glorious to see the two sides of the S chassis community. "I'm gonna KA-T swap my S15." "NO! YOU CAN'T! *Proceeds to do a TED Talk on why to keep the superior JDM "master race" engine over the older inferior truck engine.* "I'm gonna KA-T swap my S15." Really? That is a cool idea!"
Jimmy i know your probably not into making a vid of it but id be interested to see you give it a proper good cleaning under the bed/ archs/ engine etc i think that would be satisfying
cut a lil hole in the cab behind the seat and put a sub woofer box in the bed facing into the cab. use rubber to weather seal it and and put the box in a plastic container or a metal container to be sure no water gets in
Lived in Indonesia for 20 yrs and used those trucks for hauling my bikes around. Brand new they were about 8 thousand bucks! The suzukis and mitsubishis were the toughest of the bunch.
Thank you so much for this video!! I’m in the process of replacing everything engine wise back to oem parts because the previous owner sold me the car without mentioning any of the plausible issues, recently just got parts to install and this video couldn’t be more perfect to show me. Always loved your content. Keep it coming 💯🤟🏼🤟🏼🤟🏼
going back to watch this because im swapping my m54 right now and remembered this from years ago.... funny to hear jimmy say "downfall of the channel is my lack of getting stuff done.. someon who can paint...." FUCK YEAH SPOON
I got that same "Dual" head unit in my hooptie. Got it on clearance at Walmart after Xmas for $11 and came with 2 speakers. Its actually been really good for the price.
I had a HiJet on loan over the summer while I had some work done on my AZ-1. I was using a JBL Charge bluetooth speaker which I had on the dash, and then one day it accidentally fell into the footwell - INSTANTLY SOUNDED BASSIER! So yeah, if you can somehow mount a speaker down there it sounds great.
Most people don’t realize or know that quality sound has way more to do with your source than the speakers. As long as you don’t exceed the power rating of the simple motors(speakers), you’ll get great sound with a better source (amplifier)
Because that's untrue. Shit speakers will always sound like shit no matter what you power them with. Ask anyone who's ever competed is SQ competitions or built systems.
Nice the intake mod😎 i remember if the old e36 328 engine. Gets around 25 hp extra euro spec. 1 thing brain try to buy a e36 with a 2.1 liter 4 cilinder from HARTGE. Its a tuner. They took a 1.8 16v and made it beter its spicy.. 170 hp stock. Nice turbo. Your good to go..😍 🔥🔥🔥🔥
This is in reference to your grime removing technique for bolts, by putting them in a water bottle with wax and grease remover..harbor freight sells a 2 liter ultrasonic cleaner for like 50 bucks. I fill fill it 2/3 with water then add about a cup of simple green cleaner, and run it. Bolts and hardware come out spotless
If you use the wash bottle trick for the screws make a little bit sand in it and steel wool and a good yeeet oven cleaner SHAKE IT after that clean it with breake clean and it looks like brand new
Cool truck. Next time you have wheels to paint get a pack of index cards and use those to go around the wheel. Way quicker than tape. Trust me I have been doing body work for 25+ years.
@@n996h I got mine for totally free but it's had a HARD life. Been from Arkansas to Cali 4 times and back. And to Wisconsin from Arkansas 3 times. It's missing the passenger seat because my friends dad that bought it new in the 80s was a delivery driver and needed space. The driver door is also wonky so I crawl in the passenger door and plop into the driver seat like a weirdo. Love the 3 cylinder POS though.
@@n996h if it helps your decision to buy one, with even half assed maintenance they'll run almost forever. There's a reason they're the first and oldest Japanese car maker. They make some reliable stuff for realllllllllly cheap.
You should get a spray in bedliner for that thing it be sick by the way this and the video picking up the mini pickup are my all time favorite videos you did
DON'T WELD THE NUT! hope you guys see this. I just suggested your idea to my mate who has a 330i as a fix for his and he said people started welding it in the UK but it makes the shaft even weaker and they started snapping shafts!
Not sure if you’re keeping the stock wheels for very long or not. But if you are, spray them with a few layers of clear coat and they’ll stay nice for even longer, they sure turned out really clean.
¡RS WATANABE for the mini truck!😍
Yes please or some TE’s, gramlights, or even rotas
Second that notion my good sir
Yessirr
Or ssr mkii or any small old jdm wheels
Has to be these wheels for sure
Or superlites would do the job too 👌🏻👍🏻
Take that front emblem off the truck and add the Oakes “O”
Nah man, it should be a pineapple.
Also color match the front bumper and headlight surrounds
🔥
@@ae86hachi ?.
Loo
Pooiiuynnbm.?0h
@@masterricecake Uhhh... What?!
A little tech tip for painting wheels. Use a deck of playing cards and they slip in the edge of the wheel and then it masks it off super fast and then you can put tape around the outside edge to cover the rest of the tire.
On the next episode at Oakes' garage RJ goes looking for dwarfs in the Kei truck. BHall becomes the first BMW owner to ever use turn signals. Jimmy starts the KA--T swap on the S15.
"KA-T swap the S15."
That's like Rob Dahm doing the 13B-REW swap on the C5 Z06.
And it will be glorious to see the two sides of the S chassis community.
"I'm gonna KA-T swap my S15."
"NO! YOU CAN'T! *Proceeds to do a TED Talk on why to keep the superior JDM "master race" engine over the older inferior truck engine.*
"I'm gonna KA-T swap my S15."
Really? That is a cool idea!"
jimmy: "any hole"
steph: "oh ya?"
XD
Jimmy - “How’s it feel?” Steph - “tight”
Lol
When Jimmy's lady was tightening the bolts and the rachet skipped off, I literally felt my stomach drop. That's scary 🤣
Like he said perfect torque spec. She did it every time
@@r7kelley553 36ftlbs on the fucking nose 😂😭
I've had too many busted hands to not flinch every time I see that happen
@@Onewheelordeal how many hands do you have!?
Gotta start bringing Brian on fulltime pay the man haha nah the mans a beast
tha would be dope but i doubt jimmy has he bones to pay for a full time body man
Yeah, doubt Jimmy wants to pay a full time body guy atleast the same as he makes now, plus benefits for a very very part time job lol
I can’t afford him 🤣
Jimmy Oakes you will soon 👍🏻
“Don’t cut your factory pigtails” says the engineer
But def destroy the radio you are keeping the factory pigtails just to be able to put back in someday
@@Onewheelordeal Those radios can be had on beforward for pennies on the dollar.
@@Onewheelordeal dunno why he didn't just buy a Toyota radio harness.....
Jimmy i know your probably not into making a vid of it but id be interested to see you give it a proper good cleaning under the bed/ archs/ engine etc i think that would be satisfying
cut a lil hole in the cab behind the seat and put a sub woofer box in the bed facing into the cab. use rubber to weather seal it and and put the box in a plastic container or a metal container to be sure no water gets in
only use like a 4 inch sub or a 6 inch at most
Wheels look fresh but my favorite part was the radio wiring. Edit: Also, how about a “How many ugga duggas?” T shirt?.
imagine if they got a set of Watanabes or bbs to fit on the truck
Or lift it on some 44s
Bbs
or xr4 lonchamps or some other kyusha shoes, would fit right in with some japan spec shit
Bbs from a e30 Bmw or older vw might work
Lived in Indonesia for 20 yrs and used those trucks for hauling my bikes around. Brand new they were about 8 thousand bucks! The suzukis and mitsubishis were the toughest of the bunch.
The good vibes in this video are why I watch every day
engine refreshes are one of my favorite things on youtube.
The dynamic and genuine friendship you have with all your boys is good to see ❤️❤️❤️ genuinely just mates doing things 🙌🏽🙌🏽🙌🏽
Awesome now I want one lol.
Ring liner the bed a sick wrap and some rims truck would be amazing
David Diaz same. Although the last thing I need is another project haha
@@CompressorSurge 😆 🤣 😂 right.
Respect for not cutting up the harness man i guilty of doing both lol
Thank you so much for this video!! I’m in the process of replacing everything engine wise back to oem parts because the previous owner sold me the car without mentioning any of the plausible issues, recently just got parts to install and this video couldn’t be more perfect to show me. Always loved your content. Keep it coming 💯🤟🏼🤟🏼🤟🏼
Dean Cruz what car?
index cards work great to stick between the rim and tire for painting
👍
Would miata seats help with the soud system? Having the speakers on the head rest and stuff
Ooh clever idea
Totally different seating style. Trucks you sit with your legs down like a chair, knees 90; Miata and other low cars your feet go out in front.
@@Onewheelordeal they could always make raised seat rails??
@@Onewheelordeal I have mx5/miata seats in a mazda bongo which have legs at 90°
going back to watch this because im swapping my m54 right now and remembered this from years ago.... funny to hear jimmy say "downfall of the channel is my lack of getting stuff done.. someon who can paint...." FUCK YEAH SPOON
I got that same "Dual" head unit in my hooptie. Got it on clearance at Walmart after Xmas for $11 and came with 2 speakers. Its actually been really good for the price.
Mad respect for not cutting factory wiring
Dude, using the connector from the old stock radio. What a smart idea!! So much better than cutting off the factory connection 👍
Or......you could figure out which make of car they bought their radios from and got an aftermarket wiring harness.
“Slam it on tarmacs and daily it”
Haven’t heard this in a while 🤣
lmao havent that in years hahaha wonder what onion is up to these days
Back when Orion wasn't a douchebag
I had a HiJet on loan over the summer while I had some work done on my AZ-1. I was using a JBL Charge bluetooth speaker which I had on the dash, and then one day it accidentally fell into the footwell - INSTANTLY SOUNDED BASSIER! So yeah, if you can somehow mount a speaker down there it sounds great.
When cleaning bolt and nuts with a bottle add BB's or old bearings. Helps a lot
White te37-v’s would look FIRE on the kei truck!
I have the exact same mini-truck, if you pull the door panels off there are cutouts for 4" speakers ready to go
Love spending my lunch break with jimmy o and the boys.
Good trick for painting wheels is putting 4x6 note cards between the lip and tire instead of masking
Most people don’t realize or know that quality sound has way more to do with your source than the speakers. As long as you don’t exceed the power rating of the simple motors(speakers), you’ll get great sound with a better source (amplifier)
Because that's untrue. Shit speakers will always sound like shit no matter what you power them with. Ask anyone who's ever competed is SQ competitions or built systems.
ATV tires should be on the mod list
What a perfect throw with that gasket hahah you guys have fun in that shop for sure.. carefree getting it done
Jimmy and B are never not smiling. Its awesome.
What an awesome way to wake up on a friday, thanks Oakes gang
Extend the speaker wire so when your chilling outside the minitruck you could have music it's a marine speaker so its waterproof
Thought this was an old Hoonigan video by the thumbnail lol, still got excited though.
Dude, that truck cries out for some pyramid visor tweeters and some 6x9" or 8" woofers in the doors. 😎👍🏁
Nice the intake mod😎 i remember if the old e36 328 engine. Gets around 25 hp extra euro spec. 1 thing brain try to buy a e36 with a 2.1 liter 4 cilinder from HARTGE. Its a tuner. They took a 1.8 16v and made it beter its spicy.. 170 hp stock. Nice turbo. Your good to go..😍 🔥🔥🔥🔥
Hall and Oakes body and performance strikes again!
This is in reference to your grime removing technique for bolts, by putting them in a water bottle with wax and grease remover..harbor freight sells a 2 liter ultrasonic cleaner for like 50 bucks. I fill fill it 2/3 with water then add about a cup of simple green cleaner, and run it. Bolts and hardware come out spotless
If you use the wash bottle trick for the screws make a little bit sand in it and
steel wool and a good yeeet oven cleaner SHAKE IT after that clean it with breake clean and it looks like brand new
This is my new favorite build. I love the vibe hahaha
Hey Jimmy, checkout headrest speakers for the mini-truck! Good sound and it will save space!
Cool truck. Next time you have wheels to paint get a pack of index cards and use those to go around the wheel. Way quicker than tape. Trust me I have been doing body work for 25+ years.
Mini truck needs TE’s
Is that you tommy?
White te-V’s would look awesome
nah, need some geniune smol bois. like some advan a3as or longchamps, starsharks, something rly cool. not that TEs aren't cool tho
Old school Work Equip wheels, for the period correct look
TE’s are so overplayed and would not go well with that truck. It needs old school SSR’s or works
After I welded my oil pump nut on my S50, it was the oil pump housing bolts that backed out. Luckily I caught it while it still had some oil pressure.
There are holes for 4-inch speakers in the doors, and the cutouts in the door panels.
I may not know a ton about those trucks but from my good buddy Bubbles from the great white north, I do know they work well as a beer hauler
Some Work Equip 03’s or SSR Reverse Mesh would look Dope on the HiJet.
Fre Day this
I recommend using acetone for any part cleaning dissolves really fast so perfect even for like cam caps or internals !!
That DragonBall shifter is DOOOOOOOOPE in the truck!
10:02 straight vibin to the lo-fi
anyone know the song?
Next time you paint wheels use a deck of cards they work great slide in behind rim lip. Definitely a improvement with just little paint.🖒
did not know the sides of the mini truck came down like that. Thats badass.
I have a Daihatsu Charade. This makes me so hard. Also, when RJ said like a glove, it seemed weird after ages of Rudnikisms
Starts like a glove
I've been looking at one! very rarely did the U.S. get some kei style cars and that's one of them I've found :D
@@n996h I got mine for totally free but it's had a HARD life. Been from Arkansas to Cali 4 times and back. And to Wisconsin from Arkansas 3 times. It's missing the passenger seat because my friends dad that bought it new in the 80s was a delivery driver and needed space. The driver door is also wonky so I crawl in the passenger door and plop into the driver seat like a weirdo. Love the 3 cylinder POS though.
@@n996h if it helps your decision to buy one, with even half assed maintenance they'll run almost forever. There's a reason they're the first and oldest Japanese car maker. They make some reliable stuff for realllllllllly cheap.
@@n996h I've also owned 2 Yugo's, so I've had both end of the spectrum of tiny cars. Good and bad lol
I like when you just film yourself workin on stuff, hustlin to get content out
Last time I was this early, his drift car had a roof.
You should get a spray in bedliner for that thing it be sick by the way this and the video picking up the mini pickup are my all time favorite videos you did
DON'T WELD THE NUT!
hope you guys see this. I just suggested your idea to my mate who has a 330i as a fix for his and he said people started welding it in the UK but it makes the shaft even weaker and they started snapping shafts!
I really need to get me one of these. I want either that or a turbo K van. Be such a sick daily
Anime stickers on the mini truck ASAP 😂😂💪💪💪💪💪
OEM + on the radio install. Nice 👍
Slam it on tarmacs!!! Can’t wait to see what guys do with this thing, so dope!!!
There is no better workbench than a mini truck!!!!!!
You guys should get a mini compo to put in the back 👌🏼
That factory speaker setup sound pretty good 👌🏼
Would love to see the truck used as a merch truck, with a nice Oakes Garage livery on it !!!
Get a ultra sonic cleaner!! Shits so satisfying, and the harbor freight ones put in workk
the dragon ball shift nob is the best...i like the little truck!
Honda Grom in the back of the truck would be dope 👌
Amir needs to be in more videos hes wild lol i loved that guy
Be sick to see it sitting on some 13x7 jdm wheels
One of these just popped on Craigslist near me 1996 same spec with a/c. 5,300 in the middle of illinois
Steve K 5k? Damn
The radio part was a whole vibe 👌🏻
You can use a battery and make the speaker “pop” or check ohms across two wires. All this assuming there’s no amp
A lil 9 volt will push the cone out or in depending on polarity.
Those wheels are so hot now! 🔥🔥🔥
I did expect you to paint the wheels wrinkle black, so was very surprised that you went for the grey / silver :p
RJ should get his own truck.....maybe this one!
careful torquing down that valve cover lmao. Had to use a heli coil to fix one of the valve cover bolts ;/ upgraded my m54 VC to a M56 Alumnium VC
If you want to mount dirt bikes in the bed. There’s a company in my town called risk racing, and they make super secure bracket for dirt bikes.
Love the new truck and the BMW is coming along absolutely awesome keep up the good work
you BETTER put some impul g5 or some small advans on this thing, would look pretty cool
Big love for that Husaberg
some side x side wheels and tires on the K truck would be epic
I love that shift knob
You guys should check out fluid dampers for your drift cars, it will balance out your stuff a little and keep your crank happy
You guys should add a small amplified subwoofer, the under the seat ones
You should Bedliner the back of the mini truck!!
I love FCPEURO super fast shipping great prices and that no questions lifetime warranty on EVERYTHING!! Can't beat it!
That truck would look sick with some Equip 02's
you should get a bass thing for the behind the head rest
Not sure if you’re keeping the stock wheels for very long or not. But if you are, spray them with a few layers of clear coat and they’ll stay nice for even longer, they sure turned out really clean.
Get banded steels for the Kei truck.... think that would be a good look
That little thing would look awesome on somw Techno Racing old school wheels or some old school SSR or Volks.
Issa kei truck! Looking forward for this build
The DragonBall is really, the cherry in cabin. 👍
Now that’s how you suppose to torque the bolts down !!!! ✅👌🏾👌🏾 electric ⚡️ is the best!!!