Це відео не доступне.
Перепрошуємо.
Prebuilds Are Getting Really Good - NuPhy Halo65 | Review, Modding, Typing Sounds
Вставка
- Опубліковано 7 сер 2024
- With the Halo65 NuPhy has pretty much hit the target. This is a board that can be entirely sufficient right out of the box, and with a swap of switches and keycaps, it can also look and sound even better. So, if you ask me, it’s once again, almost perfect, they did a really good job on this one.
Sponsor ❤️
=============================
Volta Charger: www.voltacharger.com
Volta Spark: www.voltacharger.com/products...
Volta Giga: www.voltacharger.com/products...
Use code: CHEESE15 to get 15%
Things shown 🛍️
=============================
NuPhy Halo65: nuphy.com/products/halo65?sca...
NuPhy Twotone Wrist Rest: nuphy.com/collections/accesso...
Use code: cheese to get 10% off
NuPhy Air75: nuphy.com/collections/keyboar...
NuPhy Air60: nuphy.com/collections/keyboar...
NuPhy Mono Wrist Rest: nuphy.com/collections/accesso...
Looking for something else? Check out these affiliate links! 🤝
=============================
nuphy.com/?sca_ref=1371668.Wx... (code: cheese to get 10% off)
iqunix.store/cheese (code: cheese to get 5% off)
ezykeys.com/?ref=cheeseturbul... (code: cheese to get 5% off)
hototools.com/discount/CHEESE (code: cheese to get 5% off)
zepsody.com/?ref=BwC1Eimc (code: cheese to get 5% off)
www.amazon.com/?tag=cheesetur...
divoom.com/cheeseturbulence (code: cheeseturbulence to get 10% off, min. order $49)
www.mikit.store/cheese (code: cheese to get 5% off)
Like the music? 🎵
=============================
Sign up for Epidemic Sound using my referral link and get a 30-day free trial: www.epidemicsound.com/referra...
Gear used 🎬
=============================
Camera: geni.us/UzQAwW
Lens: geni.us/HpBXvq
Microphone:geni.us/Y6IkFI
Audio Interface: geni.us/R7lcA
Light:geni.us/13xEU
--
Complete Gear List: kit.co/CheeseTurbulence/youtu...
Chapters 📋
=============================
00:00 - Intro
00:52 - Prologue
01:28 - Prebuild Evolved (Hardware)
05:41 - Sponsor Segment
07:32 - ODST (RGB & Software)
10:21 - Infinite Customizations (Keycaps & Switches)
12:51 - Sound Test 1 (QK65, Kangaroo Switches)
14:50 - Sound Test 2 (All Stock Kangaroo, No Bottom Silicon)
16:53 - Sound Test 3 (PCB/Plate Silicon, No Silicon)
18:14 - Finish The Fight (Closing Argument)
20:21 - Thank You
Outside of UA-cam 🖼️
=============================
Instagram: / cheeseturbulence
Support ❤️
=============================
If you want to (you absolutely don’t have to) you can support the channel via Ko-Fi: ko-fi.com/cheeseturbulence
About the links 🔗
=============================
Some of the links in the description can be affiliate links, you won’t be paying extra but I get a little commission when you make a purchase.
![ЛЕБЕДЕВ у ДУДЯ: муху не обманешь 😁 [Пародия]](http://i.ytimg.com/vi/E74h5fvVrqs/mqdefault.jpg)
For those interested in a 75% version with an F-row, NuPhy just opened up the orders for the Halo75: nuphy.com/collections/keyboards/products/halo75?sca_ref=1371668.WxZWP3zbS6 (affiliate)
If you get one, don't forget to use the code "cheese" to get 10% off 😉
In the software can you set up layers?
GET THIS MAN MORE SUBSCRIBERS, your level of editing and camera work is criminally underrated
Thank you so much! 😅
I just purchased my first custom (kinda...) and I'm definitely not in dire need of another keeb video. Yet here I am watching 20 minute review of a keyboard in format that I wouldn't ever consider buying. Your videos are just so fun and good looking I can't help myself but to check them out immediately.
Thank you so much, glad you liked it and I really appreciate it! 🙂🙇♂
Again an excellent video. Good in depth review with quality camera work and editing. Love your videos.
Thank you again! 😄
New to the channel - probably the best review of anything I’ve seen. Friendly, informative, amusing, great production value. 10/10 👍🏼
Thank you! Much appreciated! 🙂
This is a very well-made review. Simple yet very informative/in-depth, nice job 😸
Thank you! 🙂
Love your video editing and story telling style. 👍👍 Great video all together!
Thank you! 🙂
The intro cinematics and sound were on point!!
you vary the best review and reviewer, I got more and enough details and information. thanks too much. continue more❤😊
Nice video.
You convinced me to get the air 75, but after 3 months I sold it.
It sounded too plastic, and the low profile Keycaps wasn’t that good to touch type.
Good improvement with normal profile switches, will increase the customizations.
I think the NuPhy has a unique space bar sound profile, which is also nice.
Dude your video editing and detail quality to the information is 2nd to none!
Thank you so much! 🙂
super underrated channel man love the preem production value
Thank you! 🙂
As a Nuphy65 + G303 Shroud edition user - I'm happy to have stumbled across your video. Solid taste, fantastic review.
Thank you! 😛
I'm really not into mechanical keyboard, but just for the quality of your videos and your relaxing narration i enjoy everyone of your uploads
Thank you again! 🙂
I bought their Air75 way back when with the intent to keep it in my backpack for office days, but I ended up liking it so much that I used it at home as well. I eventually got an Air60 to keep in my backpack so the Air75 can stay at home, to reduce the amount of keyboard juggling going on. I'm still happy with my Air75 (though the battery is kind of bad and needs to be recharged twice a week now after one year of using it), but if this keyboard ends up breaking down and they have a Halo75 out, then I'm definitely looking into it. (...or if I just get bored one day.)
They said halo 75 would be released next month.
Sad fact about the battery. Not cool. And even if replacement is not too difficult, the screws they are using are not friendly to re-screwing.
I REALLY want an NuPhy Halo75!
I can't get used to this 65% profile, but I'm very interested in the brand as a whole!
Nuphy is that company I feel like is small atm but is going to blow up soon. I use that 75 everyday at work :)
Good to hear that it’s still going! 😅
Very nice review, those B-rolls are delish! Awesome looking board! I'm curious how it would sound like with some good ol' PE Foam though.
Thank you and thanks for watching! 😀
ps: I wonder too, how it sounds with PE 🤔
great implementation keyboard!
I got my Halo65 two days ago, and I'm really loving it. But I have already replaced the switches and caps with some Gateron Oil Kings and an awesome English/Japanese dye sub PBT cap set I got recently. Though I did keep their amazing Ghost Bar on my space bar.
Great, after watching both of your reviews, I'm now torn between a Nuphy Air and Halo xD
Your content is truly unique! Wish you made more videos
Thank you so much, I wish I made more too 🙃
I just got the Halo 96 (white with rose switch) two days ago, and man is it worth the money. I also picked up the Epomaker RT100 wich I also love!
The bicycle in the ad just made me subscribe 🙂
I have the Air60V2 and I'm loving it.
Great Video once again. I've got the Black one and today I changed the switches to Outemo Silent Lemon and did the The Tape Mod. Guess I will remove the tape, because now it's almost too silent 🤦🏻♂ and reminds me too much of a membran - out of the material that should not be named - Keyboard 😅
Thanks for continue watching! 🙂
The video I need buying deciding to buy this or not!
Hey Cheese great video! Another crazy bang for your buck prebuilt you should take a look at is the akko acr pro series (acr pro 68/pro 75) these keyboards are prebuilt and come gasket mounted and have PCB foam, case foam, and come with an aluminum and polycarbonate plate all for 115.99 USD.
Uh, might have to check those out as well, thank you! 🙂 and thanks for the nice words! 🙏
I just got mine last last week and it’s the best keyboard ever
This is a gorgeous board. I’m hoping they released a 96 percent of this version. It would be perfect to me.
just buy an Iqunix... basically the same thing but nicer or get an odin if youre a nerd
They are releasing a 95 after the 75
@@j_cruz_56deuce26 is that announced?
@@Flashks yes check there page. Pics are in there
I’m a 96% guy myself. I have some adequate Logitech keyboards of that size and I just got into mechanical keyboards, so I bought a Keychron K4 Pro and preordered a NuPhy Air96
Thanks for breaking it down, so I don’t have to take mine apart. 👍
Great video!
Glad you enjoyed it! 🙂
New suscriber 😊.... Very nice content
Thank you and welcome! 🙂
Nice video! Debating on the Halo65 vs GMMK Pro. Love the sound from the GMMK Pro with Gateron Ink V2 Black, that low pitched keystroke is what I’m looking for. Any thoughts if the Halo 65 can achieve the same, or the Halo 65 sounds higher pitch and more plastic? Both looks great to me, where the Halo 65 got the LED surrounding the whole frame. 75% vs 65% doesn’t matter to me. Thanks.
i have a gmmk pro w gateron cjs n it sounds amazing. slightly modded: tape mod and extra gaskets
11:35 I think they do the whole keycap set double shot in the injection mould,
they cant fill one keycap more plastic than the other that's why the space bar is double shot as well.
and the yellow space bar is just an off the shelf keycap from the manufacturer probably for cost cutting.
also there is shine through keycaps for the air75 on pre-order right now
Didn't catch that, thank you! 😮
your reviews are so thorough I absolutely love them, I'd love to hear your opinions on the glorious gmmk pro. Is it a catastrophe at that price or is it worth it? I'm just so curious by their design decisions and with all the custom add ons it ends up being quite the investment for what it is
Never got around to buying a GMMK Pro, but you are not the first one asking me about it so maybe I should have a look at it after all 😅
Also thanks a lot for the kind words 🙂
How easy is to change between layers? Im using the anne pro 2 and I need to use 2 hands for pressing the function keys for debugging. It would be nice to be able to change from numbers to fn keys pressing some kind of shortcut for example.
love all the halo references
Do you know which connectivity drains more battery? The 2.4 Hz receiver or the Bluetooth 5.1?
the halo light synergizes really well with the frosted wrist rest! i wish u showed that
but i know you're not a big rgb fan tho haha
That's true, I only noticed that way after too... didn't even think about it 🙈
Watched your video on the Keychron, how do these 2 compare? I currently have the K2 V2 and thinking of either modding that or getting something that comes with mac keys.
Hello, Can I setup modificators like ctrl+c to assign different actions? I've got homookb with simillar software and there is no way to work with shortcuts. I can only change settings of single key
that is a nice keyboard goddamn
Nice review! I hope they will make an Air65.
Thank you! 🙂 65% would be a nice layout, but I think it is unlikely 😬
@@CheeseTurbulence yeah. I guess I'll go with the Air75 as my office keeb
really very nice and high quality video ... i have a question .... is halo 65 typing experience better than keychron k8 pro in your opinion ?
Thank you! But I sadly cannot answer that as I have never tried the K8 Pro 😔
@@CheeseTurbulence no problems at all and thanks again for the effort you put in the videos
My preference is for a quieter, low-pitched sound - I was leaning toward pre-ordering the Halo75 with Night Breeze switches, as well as an extra set of Gateron Yellow Pro 2.0 - but seeing your asterisk at around 12:20, it sounds like you would advise against the Gateron Pro 2.0 for the Halo?
Only if you intend to use MX profile caps. The included caps are taller and won't be problematic with the Pro 2.0.
@CheeseTurbulence Is the wrist rest actually worth it (it adds like $8 on shipping on top of the price)? It looks very slim, like you're gaining very little by using it..
I got this on release, came with Gateron Browns v2, they are okay but i am not a big fan of tactiles. Then tried some Gazeew Bobagum Silent switches, which are nice but i needed that sound and want linear so finally tried Gateron Milky Yellow Pros v2. Added some KBDfans spacebar foam which has trasformed the Nuphy to another level. It sounds and feels so nice now. I left all the innards silicon as stock.
I have a Keychron Q1 on order prebuilt with the Gateron Reds V2, so excited, its my first haha
@@ASMCourtney Nice! The most important mod I recommend is the force break mod with some masking tape. Even though it has some silicon pads. The PE foam at the base doesn't do as much. The 2nd thing is get some of your favourite keycaps. Enjoy!
Can you share how is the 2.4ghz connectivity for gaming? Do you experience drop offs, extra battery drain or latency? thanks!
@@eRaZerrOfficial Sorry i don't game with it, or the games i play are not FPS. I got it for work.
for anyone that owns it, how is the battery life and the wifi / bluetooth connectivity? does it ever drop off?
I saw that your channel is registered in Switzerland and wondered what you think about the change from ISO-DE to ANSI. Since it is so hard to find nice boards in ISO-de or they don't have the functions I need.
That's the Owlab Spring with the ePBT Grand Tour set, a match made in heaven 😛
Is there an option with the Halo series to get only white backlit?
Keychron K6 Pro Black vs this in black. Thoughts?
I love my Halo65. Please make a Halo75.
Can the CapsLock be Fn & the Fn key be Option? Please. Thank you.
what keyboard model is that with a knob? thanks
Sooooooo which Nuphy or mechanical keyboard do you prefer/refer?
some advice for the flickering RGB (i dont' know if you've googled this already but noticed it in a few videos so apologies!), you need to adjust your camera fps and/or shutter speed. Looks like your shutter speed/fps is set to a rate that isn't matching the frequency of the power driving the LEDs (in the US this would be 60Hz, elsewhere 50Hz) You're using the Sigma FP and uploading in 4k so I assume you're using the 4K 30fps (29.97 to be exact) mode?. if in the US and shooting at 30fps, your shutter speed should be set to multiples of 60, so 1/60, 1/120. If you're not in the US but shooting at 30fps You should switch to shooting at 24fps then your shutter speed should be set to multiples of 50, so 1/50, 1/100 etc. I Hope this helps, if not - don't hurt me I'm just a messenger! =D great video again, this mech looks cleannn
Hey, thank you so much for the advice! Don't worry, if the feedback is filled with this much effort, I wouldn't dare to shoot the messenger 😉
I actually know about these settings by now (I genuinely did not in my first videos 😅) but I am limited to what the Sigma fp is capable of. I shoot everything as you predicted at 4K 30fps (29.97), but slow down all the footage to 24fps to give it a more "cinematic" look. It cancels out my jittery handling of items and makes everything seem "smoother". So I "can't" shoot at 24fps, or I will lose my ability to slow it down and therefore my "smoothness", which I prefer over blinking. Although now that I am writing this I think I am wrong and you are right, I should try that one out. The RGB sections aren't that long and to have those look right is more important than the smoothness.
Also, I've set the shutter speed to automatic and the Sigma does try to correct it by itself, but on the Halo65, the lightbar and the switch LEDs seem to blink at different intervals and I think the Sigma fp got really confused by this, although I am not a 100% certain.
What is the polling rate with a wired connection?
i like this board but i wish they gave us an option for a solid smooth frame instead of that jagged edges
what's that keyboard you're using @2:38 ? Look's really great (keep up the good work)
That's the Percent Studio Trio-60, it's a really nice board 😉 and thank you!
Great video! Can you tell me the model of the circular timer/clock under the right. side if your monitor please?
Thank you! 🙂
That is actually not a clock but the remote control for the BenQ Halo Lightbar: www.amazon.com/dp/B08WT889V3
@@CheeseTurbulence ah, I though it was a focuse-like timer :) appreciate the update however! Thank you!
I got the black one and swapped to the Monokei key caps. Love it.
The shine-through key caps from Nuphy are worse than the included key caps unfortunately. Specially in Tab, Shift, Carl, Cmd, etc keys where the font is slightly smaller than in regular keys. In those, the defects were quite noticeable, specially in the top part of the font.
Also, no intention to troll here. But with such passion for keyboards, you’d learn to use your pinkies. 😅
I didn’t notice until this video how you actually type.
@@60400 I didn't notice it either 😅I never "properly" learned, I just type away and it seems to work fine, but now you got me thinking 🙈
For those unaware, i would suggest to switch out the keycaps IMMEDIATELY as the white keys with black legends use really fragile and soft PBT. To the point that they shine in less than a month with consistent use.
Great review of a great keyboard.
It seems like you sped up the video for about 5 to 15% to keep it a bit shorter, but I must say it sounds a bit unnatural, knowing the talking speed from the previous videos. Given the quality of your videos I think whoever watches them, takes their time to finish watching them, regardless how long they are.
Thanks for those words! It wasn’t actually sped up but I tried to speak faster than usual 🫣 couple days after publishing I finally noticed it too, hope it wasn’t too bad to listen to 🙈
I would really consider it if it comes in a 75 layout. I really do need f-row for my programming.
The Halo75 is coming out in just a few days 🙂
@@CheeseTurbulence im going to order the 75 but want to know which switches thock more than clack. Someone said get the baby kangaroo switches but I’d like your opinion after watching your video. I know switches sound different in different setups but do you know for the stock halo which switches are the thockiest ?
@@j_cruz_56deuce26 I ordered the linear night breeze. Wish me luck 😬
In my country they sell this at 140$ Do you guys think it's worth it?
Or should i buy K6 pro instead? it's 109$
Great vid!
short question, are you from germany? ur voice just sounds like that ^^
Close, Switzerland to be more precise 🙂
Also, thank you! 😄
@@CheeseTurbulence Swiss Cheese Turbulence!
Do you know how to type backticks?
Hi guys ! how make arobase with this keyboard?
someone should make a video like this with a dirty desk, just to be different
How do I access keys f1-f12?
Torn between this and Keychron Q1 v2
Whyyy did it already sell out ;(
My god that intro B roll was sexy
I would have bought it but nuphy doesn't ship to my country :(
I really don’t like OEM, I wish they would allow selecting the desired Keycaps profiles too for an extra ( like XDA, SA, etc)
They included a waifu in the box but it's fricking hard to get the JIS layout 😔
the missing option key on the right kills it for mac international layout users!!! 🤨
I'll stick with the Logitech Mx mechanical...
Where do i download the software?? Ive been searching like a madman
You can get it here: nuphy.com/pages/nuphy-console (hope this reply isn't too late 😅)
Did you need custom duty to get this?
In my case no, because I didn’t buy it (NuPhy sent it to me). But for other boards I bought I always had to.
How is this already sold out. Just let me buy it😭
Love the video - content, production, etc. I don’t love what sounds like slight time compression of your voice. Maybe you actually talk that fast normally but it sounds slightly accelerated. A strange contrast to your otherwise thoughtful, paced tone.
Yeah I noticed that way too late too, I did try to talk "faster" in this video (it was not digitally sped up, even if it sounds almost artificial) but I completely overcorrected with my attempt.
But thanks for the kind words 🙂 not gonna continue this experiment with faster talking 😅
do a melgeek keyboard review
I wish manufacturers wouldn't always ignore ISO users. Sure, ANSI is a great layout, but especially we Europeans would be happy about an ISO variant. Would be a direct purchase for me.
Im german so I kinda need äöü and stuff quite a lot. However I still bought it and now just use the American International layout in windows, which allows me to write these by clicking ctrl+" and then the needed letter. I gotta say having the letters as separate keys is much less of a hassle, but having such a nice keyboard and being able to finally change to really good looking keycaps was the point that convinced me to buy it. Also as someone who is programming a lot, this layout helps tremendously. the only thing that stresses me out still is the swap of y and z
What keyboard is he using at 2:46?
The grey one? Thats the Keychron Q2 🙂, you can watch a video about it here: ua-cam.com/video/vyGleMZVpwg/v-deo.html
How do I get the software
You can get it on their website: nuphy.com/pages/nuphy-console
Is it hotswap?
Yes it is 🙂
Hmm, in my taste, low profile is just simply better (even nuphy75air) and if you tweak it- it's damn good :)
Dat = That
Slow down to 0.75x, you’re welcome
was really dissapointed when I found out NUPHY products ship from China.
I bought a NuPhy board a while back. My opinion is it was pretty bad. Most people can't admit that something they purchased is bad because well then they would have buyers remorse. I'm going to say i probably wouldn't recommend NuPhy boards to anyone at their price point especially with all the great boards coming out recently for a similar price.
If you are watching this and on the fence about which board to get I would recommend looking elsewhere.
Got any recommendations?
Tray mount is an automatic no from me
Shame as they have done so much right with the product
there is a video from keybored that turns it into a top mount, sounds and feels better this way :)
Mmmmmmm the thock!😍😍😍
Silicone and not Silicon :)
...is this some kind of a fetish? What's a prebuild?
Too bad they still don't want to invest in the software. The software, especially if open-source, would revolutionize their keyboards.
MEH. NO FROW NO DICE
prebuilts were always good....u lot have got a really high nose after getting to build some boards for yourself, and then demanding the companies bow down to your demands
This dude talks a ton but says nothing