My grandfather ran a 200 acre farm with an International W4 and Allis B. My Father and I ran our own farm plus 2 other 100 acre farms with a Cockshutt 30 and BF Minneapolis and neither were never short of horsepower. Dad even ran a Case 1 row corn harvester with the Cockshutt. Don't ever underestimate the power of small tractors!
I have a new holland 271 and 68 both with a Wisconsin, I think they're rated for 18 when they were new. I'm definitely down a bunch of power on the 68 though.
A great video of a young man learning about haying. The ol 14T performed like I remember. Missing an occasional bale, almost picking up all of the hay, vibrating the pto when you make the curves. Hopefully you found most of the grease zerts and the knotters keep functioning. Don't break any needles and have a sack of shear pins. Check the oil in the gear box. Good luck.
Thanks, l’ve ran it the past 7 or so years, the pto in the corners is a little annoying though and I’ve got a bag of sheer bolts haven’t broke too many the past couple years. Yep got to keep the grease and oil topped up!
Thanks bud for this video, you did a great job! Im looking at a 14t to buy for a grand. The guy said its the best baler he ever owned, he’s selling because hes too old to keep haying. I plan to bale mostly straw. Have you baled straw with your 14t? God Bless You Too!
I've run a baler with a 78 hp tractor using the 1000 rpm P.T.O . with the tractor engine running about 1100 rpm to get the required 540 rpm P.T.O. speed. No issues at all (Mind you that wasn't doing any hill climbing!)
I know an old vid, but I've been haying with a Kioti 2510 (24hp PTO) and a NH 315 baler for 2 years now (about 1500 bales per year).. Hays just as well as anything else, and the 315 is bigger than this 14T.
I made a mistake hitting keys, but behind the baler, we had 2 guys on a hay rack stacking them up as they came out. The A was and still is a workhorse without all the new stuff.
A 3032E is overkill!* We pull our NH 66 with an 8N or 2025R (both basically the same power) and the Deere handles it great. */s, actually probably a pretty great size for a small baler, the 2025 is about the minimum I’d want to use for a light old ~2k lb baler running at 70 strokes a minute.
Any tractor can run any equipment if people take there time and slow down hell ive killed a many of 200 horse power deeres pulling 7 and 8 shank plows u can even overload big tractors
My grandfather ran a 200 acre farm with an International W4 and Allis B. My Father and I ran our own farm plus 2 other 100 acre farms with a Cockshutt 30 and BF Minneapolis and neither were never short of horsepower. Dad even ran a Case 1 row corn harvester with the Cockshutt. Don't ever underestimate the power of small tractors!
They do pack a punch for there small size!
No problem, we have have a 14T and we always used a Minneapolis Moline Z. Sometimes a John Deere B when my 8 year old sister was driving.
Nice to see the baler working.
Nathan thanks for showing that it can be done with small equipment like our fathers or grandfather did.
The 14T with the Wisconsin Robin engine was probably only 14HP back in the day. Grandfather had one. Worked awesome.
I have a new holland 271 and 68 both with a Wisconsin, I think they're rated for 18 when they were new. I'm definitely down a bunch of power on the 68 though.
Ran ours in a pinch with an Allis Chalmers CA with a wagon behind on fairly level fields.
A great video of a young man learning about haying. The ol 14T performed like I remember. Missing an occasional bale, almost picking up all of the hay, vibrating the pto when you make the curves. Hopefully you found most of the grease zerts and the knotters keep functioning. Don't break any needles and have a sack of shear pins. Check the oil in the gear box. Good luck.
Thanks, l’ve ran it the past 7 or so years, the pto in the corners is a little annoying though and I’ve got a bag of sheer bolts haven’t broke too many the past couple years. Yep got to keep the grease and oil topped up!
Thanks bud for this video, you did a great job! Im looking at a 14t to buy for a grand. The guy said its the best baler he ever owned, he’s selling because hes too old to keep haying. I plan to bale mostly straw. Have you baled straw with your 14t? God Bless You Too!
I've haven't ever baled straw so i don't know how well it would work.
I've run a baler with a 78 hp tractor using the 1000 rpm P.T.O . with the tractor engine running about 1100 rpm to get the required 540 rpm P.T.O. speed. No issues at all (Mind you that wasn't doing any hill climbing!)
We baled for 10 years with our 1941 John Deere B (18hp) and the 14T. Worked fine. Heavy windrows you went slower.
Cool, I have to go slower in the thicker hay too.
Cool old baler.
Yes it is.
I know an old vid, but I've been haying with a Kioti 2510 (24hp PTO) and a NH 315 baler for 2 years now (about 1500 bales per year).. Hays just as well as anything else, and the 315 is bigger than this 14T.
Nice! I did about 1000 bales this last year with the 3032e and 14t!
Vim através do America Rural :)
If you want a low HP tractor, I used run an A pulling a 214w baler, plus a haystack that we foll6
I made a mistake hitting keys, but behind the baler, we had 2 guys on a hay rack stacking them up as they came out. The A was and still is a workhorse without all the new stuff.
A 3032E is overkill!* We pull our NH 66 with an 8N or 2025R (both basically the same power) and the Deere handles it great.
*/s, actually probably a pretty great size for a small baler, the 2025 is about the minimum I’d want to use for a light old ~2k lb baler running at 70 strokes a minute.
I ran our 14t with our jd 870.it ran the baler with no issues.
Turn that tractor off when doing anything with the PTO man
Great video, but I'd rather hear that equipment operating than that "music." Just a thought.
Ya missed a bunch of hay in there, buddy.
Ya after I bale out of the windrow it is hard for the Baler to pick it up. I’d probably have to rake it again to get it all.
Should np a 224t requires 20 to run it.. I got 3 jd balers
It does run it just fine, we had two balers for a while.
@@NathanAnderson. i got 2 feilds 12 miles apart so easier to have equipment at both
Any tractor can run any equipment if people take there time and slow down hell ive killed a many of 200 horse power deeres pulling 7 and 8 shank plows u can even overload big tractors
True
If it don"t run it better check you tractor farmal H only had 19 and runs 14 and 24t baler fine
That baler almost out weighs that tractor
Yep, but it works!
lose the "music"
Yes it’s way to loud 🤦
Thanks for the feedback though.
Looks like you need to work on raking more than baling.
Ya the rake i use is missing some tines.