This works only if you're plugging into your head unit's reverse receptacle. Otherwise, you can attach (solder) the red power wire to your reverse light wire that is close to the reverse bulb and socket. Then you ground the black wire to metal on the car. Whenever you put your car in reverse, it will activate the reverse light bulb and the backup camera.
That doesn’t always work. Some cars (my 2016 Jetta) only send 9 volts through there with the engine on. Weirdly, it send 12 volts with the engine off and works.
I shit you not gentlemen no UA-cam tutorial video, No how to guide, just unmatched caveman instinct. I jammed that red wire in the light plug ( I don’t know a lot about cars) and hoped it worked, and after 50 attempts. It turned on.
That red wire is a trigger wire to connect to your trigger at the front of the car. However, the other two wires are to connect to your rear reversing light, this will power the camera and you won't need the trigger.
@@tbogdane I think it depends on the car and can bus. In my daughters Ford Focus the canbus tells the headunit it has shifted into reverse and so brings the screen up. This is with one of the aftermarket radio systems that is plug and play into the car's wiring looms etc.
I was trying to get through the rubber and I damaged the end of the cable. I decided to cut and run the wire because it was thinner, now I bought a new P2 power cable. Can I just cut it too and splice it to my old one? I saw that there are 3 wires.
I know this is old post, but im wondering how to fix a low voltage for the car. The back up camera works when its not running. But when you turn the engine ON, it will say NO SIGNAL. Simply the voltage drop. Need help please
Same problem here, with engine off it works, with engine on says no signal, BUT, if i remove the ground wite it will show some disruption in video but not working properly.. vw 2014
Amigo me podrías colaborar el cable de video se me daño y no sé cómo van los cables al RCA hembra quiero saber dónde va el de video y donde va el de gnd gracias espero
Words come out from our mouth, if you didn't know
Calm down tough guy. He may not know to explain it I english.
And what if he can’t speak ?
😂
😂😂😂
So what's wrong with subtitles in various languages?
This works only if you're plugging into your head unit's reverse receptacle.
Otherwise, you can attach (solder) the red power wire to your reverse light wire that is close to the reverse bulb and socket. Then you ground the black wire to metal on the car.
Whenever you put your car in reverse, it will activate the reverse light bulb and the backup camera.
That doesn’t always work. Some cars (my 2016 Jetta) only send 9 volts through there with the engine on.
Weirdly, it send 12 volts with the engine off and works.
I shit you not gentlemen no UA-cam tutorial video, No how to guide, just unmatched caveman instinct. I jammed that red wire in the light plug ( I don’t know a lot about cars) and hoped it worked, and after 50 attempts. It turned on.
this video takes sign language to another level !
No kidding
That red wire is a trigger wire to connect to your trigger at the front of the car. However, the other two wires are to connect to your rear reversing light, this will power the camera and you won't need the trigger.
Won't the headunit need the signal from the trigger so it knows to display the rear camera?
@@tbogdane I think it depends on the car and can bus. In my daughters Ford Focus the canbus tells the headunit it has shifted into reverse and so brings the screen up. This is with one of the aftermarket radio systems that is plug and play into the car's wiring looms etc.
@tbogdane1610 Yes you need to connect it to the reverse + trigger as well
Yeah I'm like could you tell me where in the car are you at you didn't show that. It's pretty important if you want viewers
Well those flaps just need tape em up not connect @@kayboo5835
A man of few words
lol
I have my red/black going to my battery. Plus & minus obviously. And the red up front I don’t use. My cam activated when I select reverse.
Thank you for explaining that extra red wire. I was so confused. Thank you!!
@@toddsmith8820 👍👍💯
It's BC U have a canbus, without U have to connect the trigger that extra red wire..
So theres a blind man and a def man watching this clip together and the joke ends there
I was trying to get through the rubber and I damaged the end of the cable. I decided to cut and run the wire because it was thinner, now I bought a new P2 power cable. Can I just cut it too and splice it to my old one? I saw that there are 3 wires.
Lol 😂. Steven Spielberg right there ladies and gentlemen
Can I use this camera inside to record.thanks
Thank you Chinese man 👍👍👍👍
If you're going to make an advice video....Best to speak 😊😊😊
It would certainly help maybe it was sign language😂😂😂😂
Wow great video 😂😂😂
Lol… I love this!!😂😂
Anyone know where I wire the red and black to? I know rear light but it’s a multi colored loom..
Did you have to use the red black wire then
Mine just said “rear camera not detected “ anybody has this issue before? Was working fine
Helpful 🎉😊
Someone jinxed him before the making of this video
Don't connect red to red. This will just ensure there is no power going to your camera! Connect 1 of the reds to ignition live (preferably via a fuse)
Ok ,red to red but where ?
I know this is old post, but im wondering how to fix a low voltage for the car. The back up camera works when its not running. But when you turn the engine ON, it will say NO SIGNAL. Simply the voltage drop. Need help please
same need help to, I reckon its the wiring been trying to find a solution.
Did you use quick lock connectors? If you cut the original wires it senses the voltage drop.
Same problem here, with engine off it works, with engine on says no signal, BUT, if i remove the ground wite it will show some disruption in video but not working properly.. vw 2014
thicker gauge use copper not cca
Que pasa si los cables negativo se me tocaron en el adaptador .se puede quemar la pantalla .ya enchufada en el carro
how can i wire my factory one to a after market head unit
Can you use it as a dash cam ?
Where is the ground? Where are you put in the ground?
*Чаво чаво ? Не xyR не слышно тебя😂*
What is he trying to say that those are connected with eachother 😅
toyota hybrid 2024 plis
Ainda bem que ele tem dedos, porque senão se iríamos ver os fios.
Wtf wow 😂
Amigo me podrías colaborar el cable de video se me daño y no sé cómo van los cables al RCA hembra quiero saber dónde va el de video y donde va el de gnd gracias espero
Useless. Which end is attached to the camera, and which end goes to the display?
Use your words.
Bro post instructions video, gives no instructions 😂
Vídeo sem som na ao adianta nada
Привет для чего этот открытый красный провод?
Where is 5hat red wire connect too?
Red to red then what? And where? OMG
Red to Red, then to the + reverse trigger on the tail light and of course black to a good ground source or -
Boss how can I contact with mobile phone
Horrible explanation 😒
Thx
Next time less jibber jabber and just get straight to the point
Waste of time
?????????????
Lousy, shy, secretive video
What a joke
Get a phone stand it will do wonders for your recording and free up your hands
Wtf
Nunca vi mudo fazer video😂
What the hell is this telling me
this video is the Joe Biden edition slow ,quiet and not smart enough to talk .
Useless
Didn't understand at all!
😅😅😅😅😅😅
Very helpful
اون سرشو چه کنیم
Cum putem prelungi cablul video?
Eu não entendo pq a pessoa não fala
Wtf?
Its not working
Worthless video genius
Lol
What about the black
Ground
And what to tail light 12V?@@Albel7
@@MiroslavJahelkadid you figure it out?
Wrong lol
Unfollow😂 x information
Talk Mf damn
Trash
Wtf
Lol
WTF