Millions thabks for this. no need for words if its clear like that you show is, better than every signal one of them so called 'how to install' video out there. Perfection.👍
Great video, Is there any chance that you can make something simmilar for those android 11 head units (snapdragon 662) with canbus installation for audi b8 (a4, a5, q5) (2008-2015)? Thank you in advance. Only way how I was able to power camera was putting 12v from reverse light to CAMERA DET WIRE and from HeadUnit with CAMERA 12 wire to camera. And it takes 2s to go to camera and 2-3 to come back. It's not instant at all. And If I am not mistaking it is not proper canbus reverse camera mode?
On the amarok 2013. After installed the reverse camera working properly when reverseing. But then i turn left or right signal the sreen display the blank view of camera too.do you know how to disappear this issue. Thank
Please tell me the year of production of your car,usually you need a CAN decoder and fiber optic decoder .If you have any question please connect us via Email 651329850@qq.com
Everything depends on canbus converter box. In my case connection as above is impossible from simple reason, camera with LEDs consume too much current, and driver just switch off the whole head unit.
So I don’t have to ground the camera? I’m getting interference with my signal and then I figured out I have canbus but my ground is wire to my reverse light
I think u dont nee ground on the camera side bc video connection already have ground so if u connect another ground, theres a ground loop and should be the cause of the interference
The ground wire of the video signal is connected to the ground wire of the camera. When you connect the video plug, the camera is actually connected to the ground wire.Some cars have pulsating DC signal when the engine is started. If the video signal interference is serious, you can connect the ground wire of the camera to the steel structure of the car. Because the steel structure of the car is actually the ground wire
@@gmlv9994 i have that problem. Camera working ok, when my car is off. When i start the car, camer is not working proper. Like pulsating stripes... i cant explain you. My english is not so well. Do i need to cut ground wire? Does it work proper then?
No explanation of what he’s doing, or why he’s doing it. How is the average Joe supposed to follow that. A drawing of the connections would of helped a little bit If he had problems talking. Thumbs down from me.
Hi, this video was recorded for the purchase of XISEDO car stereo with CAN decoder, and the customer needs to install backup camera. It is only suitable for cars with CAN decoders. In this method, the backup camera is powered by the CAN decoder.
Hi I have an issue every time I put my ve hole in reverse with headlights on the radio cuts out sometime I just have headlights on and it cuts out went to over 20 auto elterician can’t find issue
Millions thabks for this. no need for words if its clear like that you show is, better than every signal one of them so called 'how to install' video out there. Perfection.👍
So it seems like you basically spliced the power red wire to the pink wire that leads into the canbus?
Priceless! Thanks!
Please I’ve 3 yellow connectors DVD video in, DVR L , and DVR R, which one do I need to connect the camera to please?
Can you tell me would wiring this way work on a vw caddy mk111?
Perfect. Most helpful. Thank you kindly.
what canbus has common with reverse camera in your case????
Why do these things not come with instructions?
Hy! No.1 video!!! This wire has power only when the car is in reverse gear?
Yes, it is controlled by CAN decoder
@@gmlv9994 no need to conect on 12v+ of the rear light?
What colour wire was that for camra it should be labled G5 AS IT STATES IN INSTRUCTION LIKE THE AC PLUGS FIX EVER THING
If i switch to reverse gear my android radio dont switch to camera. but i dont connect the backup camera now. but is it normal ?
Great video, Is there any chance that you can make something simmilar for those android 11 head units (snapdragon 662) with canbus installation for audi b8 (a4, a5, q5) (2008-2015)? Thank you in advance. Only way how I was able to power camera was putting 12v from reverse light to CAMERA DET WIRE and from HeadUnit with CAMERA 12 wire to camera. And it takes 2s to go to camera and 2-3 to come back. It's not instant at all. And If I am not mistaking it is not proper canbus reverse camera mode?
Ciao, per favore come alimenti la cam se il filo nero e la coppia dei rossi che hai attaccato inizialmente non sono collegati ai fili delle lampade?
On the amarok 2013. After installed the reverse camera working properly when reverseing. But then i turn left or right signal the sreen display the blank view of camera too.do you know how to disappear this issue. Thank
Thank you for sharing video. What canbus. My car R230 if I fit android unit how many convertor box I need to work with oem. amplifier
Please tell me the year of production of your car,usually you need a CAN decoder and fiber optic decoder .If you have any question please connect us via Email 651329850@qq.com
Which wire did you connect
@@allendecastro2174 the pink (revers/back)
One two three you have to be kidding me with this garbage. Absolutely doesn't answer a thing
My solara equipped with factory jbl system Work well with 10.2 android but when I put back up camera in it’s has no sound … would you help please?
Everything depends on canbus converter box. In my case connection as above is impossible from simple reason, camera with LEDs consume too much current, and driver just switch off the whole head unit.
can you tell what is the cable for 3 please?
So I don’t have to ground the camera? I’m getting interference with my signal and then I figured out I have canbus but my ground is wire to my reverse light
I think u dont nee ground on the camera side bc video connection already have ground so if u connect another ground, theres a ground loop and should be the cause of the interference
Key 1key 2 way not work?
So no reverse light tapping needed?
Yes,it will be powered by the CAN decoder to the backup camera.It is only suitable for your car with CAN decoder
How can the camera work without ground connection?
The ground wire of the video signal is connected to the ground wire of the camera. When you connect the video plug, the camera is actually connected to the ground wire.Some cars have pulsating DC signal when the engine is started. If the video signal interference is serious, you can connect the ground wire of the camera to the steel structure of the car. Because the steel structure of the car is actually the ground wire
@@gmlv9994 i have that problem. Camera working ok, when my car is off. When i start the car, camer is not working proper. Like pulsating stripes... i cant explain you. My english is not so well. Do i need to cut ground wire? Does it work proper then?
No comment on what is going on and why.? Useless
I already have a camera will it plug and play?
Wang, too, sree... @1:27
No explanation of what he’s doing, or why he’s doing it. How is the average Joe supposed to follow that. A drawing of the connections would of helped a little bit If he had problems talking. Thumbs down from me.
Hi, this video was recorded for the purchase of XISEDO car stereo with CAN decoder, and the customer needs to install backup camera. It is only suitable for cars with CAN decoders. In this method, the backup camera is powered by the CAN decoder.
One Two Three you have to be kidding me with this. Absolutely zero help
Worst tutorial ever
Hi I have an issue every time I put my ve hole in reverse with headlights on the radio cuts out sometime I just have headlights on and it cuts out went to over 20 auto elterician can’t find issue