Olight Warrior Nano: The Smallest EDC Tactical Flashlight?

Поділитися
Вставка
  • Опубліковано 12 вер 2024
  • Get up to 40% off the Warrior Nano here 👇
    Link: www.olightstor... (affiliate link)
    Valid from: 8 pm 25/10-11:59 27/10 AEDT
    Warrior Nano from Amazon 👇
    amzn.to/3S8CLFN (affiliate link)
    In this video, I review the Olight Warrior Nano - the newest Olight's Warrior Series member! Find out if this is the right tactical flashlight for you.
    -----------------------------------------------------------------------------
    Please support my work and receive discounts by purchasing recommended products through my affiliate links which are found throughout this video description. If you buy something through one of these links, it won't cost you anything extra, but I may receive a small commission, which helps keep this channel going. Thanks!
    ********
    Flashlight Discount Codes (Master Spreadsheet) 👇👇👇
    🔦🔦🔦 bit.ly/darrenyeo
    ********
    My Amazon Store 👇
    🔦 www.amazon.com...
    🌐 My Website: www.darrenyeo.com
    -----------------------------------------------------------------------------
    Video Transcript: Warrior Nano
    General thoughts after a week of usage/size comparison/practicality/interesting things:
    • So I've been using this light for a while now and have to say… this is the smallest fully functional tactical flashlight that I own! Very easy to pocket - same diameter all the way through. That's important for me as it's more comfortable to carry. One of the things I love about the Warrior Nano is that it doesn't sacrifice functionality.
    • What comes in the box.
    • Size comparison with Warrior Mini 3, Warrior 3S, Nextorch TA20, Sofirn SC18
    Overall Construction, LED, lens, bezel, and reflector
    • Even though the Warrior Nano is smaller than the Warrior Mini 3 and Warrior 3S, you still get the same premium construction. It looks and feels like a shorter version of the Warrior Mini 3, even down to the clip. Speaking of which, the light sits further down in the pocket when placed head down than the Warrior Mini 3. Nice grippy knurling helps a lot, given the anodizing is a little slippery - it feels identical to the finish on the Warrior 3S. I really like the design of the tactical tail switch - it's sleek and doesn't have a gap between the outer and inner switch that you see on the Warrior 3S. It's also magnetic. The side switch is relatively large compared to some others I've seen and made of aluminum, slightly recessed.
    • TIR lens with unknown LED - I think it's an Osram P9 based on the 1200-lumen spec and tint. Olight made a good call here - they could have gone with a more powerful LED but it'd have short runtime due to the 18350 cell… not to mention excess heat that would cause issues in this smaller host. The bezel is crenulated but not sharp. Nice blue accent.
    UI - modes
    • Side switch - Moonlight - hold side switch. Click and hold to change modes (LMH) and double press for turbo.
    • Tail switch - half press quickly for medium constant on, hard press quickly for turbo constant on. Holding the switch on either mode will activate the momentary mode.
    • Switch from Turbo to Half Turbo and vice versa - connect to the charger and hold the side switch for 2+ seconds.
    • Switch from hard press turbo to hard press strobe - hold hard press while pressing side switch.
    • Electronic lockout - hold the side switch for 2+ seconds
    Performance - total output, beam profile, longevity, practicality
    • CCT, CRI, Ceiling bounce test
    • TIR lens produces a decently throwy beam with a large hotspot and lots of spill.
    Considerations
    • 1200 lumen output max. I still think this is the sweet spot for a host of this size.
    • Proprietary charging/battery. 18350 - small capacity battery.
    • No proximity sensor - this could be a pro or con depending on your preferences. The beam does get hot enough on turbo to melt plastic and burn darker-colored paper, but you can always lock the light out.
    Verdict
    • The Olight Warrior Nano is the perfect ultra-compact, tactical flashlight or backup flashlight. It's light, takes up little room, and is very bright for its size. The design of the side switch and easy access to 4 brightness settings make it great if you are just planning to use it as a smaller general-purpose light.

КОМЕНТАРІ • 11

  • @TorchHacker
    @TorchHacker 10 місяців тому +2

    It's so cool how you can lego the Nano with a WM3!

    • @DarrenYeoYT
      @DarrenYeoYT  10 місяців тому +2

      Yeah! I like the shorter tube for the warrior mini 3. You'd probably want to get both black versions if you want it to look neater though

    • @collectorman7
      @collectorman7 10 місяців тому +2

      ​@@DarrenYeoYTnormalement les warrior mini 1.2 et 3 devrait pouvoir s'adapter avec la warrior nano pour son tube court 18350 et son tail Switch ☺️ non ?

    • @DarrenYeoYT
      @DarrenYeoYT  10 місяців тому +1

      ​@@collectorman7yes i think this should work with previous models of the warrior mini 3

    • @collectorman7
      @collectorman7 10 місяців тому

      @@DarrenYeoYT Merci cher ami 👍

  • @the_nma5119
    @the_nma5119 10 місяців тому +1

    you forgot to say when you put the head of the WM3 on the nano you get 1750 lumen output cause the driver. and vice versa.

    • @DarrenYeoYT
      @DarrenYeoYT  10 місяців тому

      Ah yes true. I'm unsure if the 18350 provides the same draw though. Seems brighter on the 18650

  • @ParkerBinion
    @ParkerBinion 9 днів тому

    Not really tactical or good for self-defense with such low candela (less than 5K). This is larger and more expensive than the Baton 4, but I don't see any benefits it has over the Baton 4 aside from slightly longer run times. That's easily solved with the Baton 4 charging case that doubles as a phone charger.

    • @DarrenYeoYT
      @DarrenYeoYT  9 днів тому

      An Osram W2 would be perfect in this.

  • @1tr1ck
    @1tr1ck 10 місяців тому

    Any where to tether a lanyard ?

    • @DarrenYeoYT
      @DarrenYeoYT  10 місяців тому

      Yes the clip has a hole at the end that you can attach the lanyard.