Mini One (2014 - 2018) - Service the cooling system
Вставка
- Опубліковано 23 вер 2020
- Do you need to Service the cooling system on your Mini One (2014 - 2018) but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Mini One (2014 - 2018) manual covers the petrol and diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-gb/mini/one/201...
What's covered:
Petrol:
Mini One 1.2 litre (1198cc) 3-cyl turbo (March 2014 - 2018)
Mini Cooper 1.2 litre (1198cc) 3-cyl turbo (March 2014 - 2018)
Mini Cooper S 1.2 litre (1198cc) 3-cyl turbo (March 2014 - 2018)
Mini One 1.5 litre (1499cc) 3-cyl turbo(March 2014 - 2018)
Mini Cooper 1.5 litre (1499cc) 3-cyl turbo (March 2014 - 2018)
Mini Cooper S 1.5 litre (1499cc) 3-cyl turbo (March 2014 - 2018)
Mini One 2.0 litre (1998cc) 4-cyl turbo (March 2014 - 2018)
Mini Cooper 2.0 litre (1998cc) 4-cyl turbo (March 2014 - 2018)
Mini Cooper S 2.0 litre (1998cc) 4-cyl turbo (March 2014 - 2018)
Diesel:
Mini One 1.5 litre (1496cc) 3-cyl (March 2014 - 2018)
Mini Cooper 1.5 litre (1496cc) 3-cyl (March 2014 - 2018)
Mini Cooper S 1.5 litre (1496cc) 3-cyl (March 2014 - 2018)
Exclusions:
Does NOT cover 2.0 litre turbo-diesel, or Clubman, Countryman, Convertible, or John Cooper Works (JCW) versions.
Does NOT cover ‘Mk 2’-based models (Paceman, Roadster, Coupe) or facelifted ‘Mk 3’ range introduced March 2018. - Авто та транспорт
Absolutely mental!!! No wonder this is the only video that seems to be available on the planet!!
This video was absolutely perfect - the best tutorial style on UA-cam. Thank you!
Wow, thank you!
Thank you for sharing
You're welcome!
Great video! Great work! Keep it up! New subscriber!
Thanks for the sub!
Thank you very much for this informative video! You did an excellent job explaining the ordeal! At the end, during the pump venting procedure, do I need to do anything else while it is running? Or do I only leave it on with the low beams and wait for the 12mins to be up?
Just wait for the 12 minutes, then top up the system.
This is a very good video, than you so much, do you have a video to change the thermostat and water pump housing? Do I have to remove the compressor? I really appreciate your help🙏
There's no need to completely remove the compressor - just unbolt it and move it to one side without disconnecting the refrigerant hoses.
This might be the best how-to video I have ever seen, thank you!
You're welcome!
Hi! Love your videos and I do have your Haynes manual. For my Mini S F55, I replaced the turbo (primmed), the cat, turbo oil lines etc. Given I had to detach the coolant lines from the turbo, I’m guessing that would give me an air pocket I would need to bleed? Should I follow the gas-pedal step Gents? Cheers!
Yes, we would recommend that you carry out the bleeding procedure
I'm so confused where is the coolant draining out of??? He doesn't undo anything other than bleeder screw up top?
Thank you, very helpful! I have the 2L, but on following the instructions and pressing the accelerator for 10-12 seconds, nothing happens! I tried various combinations of heat on and headlights, still nothing. Anyone have any ideas?
I know it’s an old post, but I’ve found on some F5X cars you have to start the engine for it to work. Basically follow the same directions, but after you press the accelerator for 10 seconds, release the pedal, then start the engine. You’ll know it’s working because the engine will idle high (~1300 RPM) for around 10 minutes, then drop to a more normal idle around 800 RPM
During the 12 minute pump venting procedure after pushing down the gas pedal to 100% for 10 sec do you need to turn the heat on to max temp and low fan speed similar to you do during the regular procedure?
The procedure in the video is exactly as Mini describe. The way I read it, the heat should still be set to MAX with the fan at low speed.
Is this tutorial suitable for a Mini JCW 2.0L B48A20 engine 2016 model?
Unfortunately not. Our manual doesn't cover the JCW models.
Do you have a video showing how to take the radiator out?
Sorry, no not yet
If my mini is a 1.5 L model, do I need to perform the additional battery charger step?
Connecting a battery charger is only necessary on the 1.5L diesel, and 2.0 litre petrol models.
@@HaynesManuals does the 12 minute bleeding process work on the 1.5L B38 Petrol but you just don’t require the battery charger?
How the hell do you get to the cooling pump hose without removing radiator
It's unclear to me why removing so much was necessary just to drain
It seems long-winded, but this was the procedure described by Mini