@@fixanddrive The DT engine is making a knocking noise at the moment. I have a another car with the DTH engine. I thought I would try a engine swop if possible.
you need the DTH ECU, the full engine wiring loom (DTH has more sensors and in different locations) and you need to compare the connectivity between the engine wiring loom and the other components of the car and wire them accordingly, then you need to code the ECU to the car via Tech2/MDI
Hi, thanks a lot for videos. Could you help me with my problem about code C0050-06 Rear Right Wheel Speed Sensor Circuit Open or Low Voltage. Engine won't start. I've checked rear wheel abs cable. I think problem is with abs cable in engine side. But I don't know where should I search?
Hello there! I have just one question about z19dt engine... Can I use diesel injectors with end number 165 from Opel to my Alfa originally with end number 276? Both cars are 120hp, both cars are with the same z19dt engine, thanks!
When i press acceleration, fuel consumption shows less when i release pedal. On released pedal it shows 50L. Is there any problem of any sensor? Thanks man.
Timestamps:
0:07 - MAP Sensor / Boost Sensor
0:28 - Crankshaft Sensor
1:03 - Engine Temperature Sensor
1:24 - Oil Pressure Warning Light Switch
1:47 - Camshaft Sensor
2:41 - Minimum Oil Level Sensor
3:33 - Fuel Rail Pressure Sensor & Fuel Pressure Regulation Solenoid Valve
4:05 - Vacuum and Turbocharger Sensor
4:27 - Fuel Metering Solenoid Valve
4:48 - EGR Valve
Thanks man, could not find wtf is that, thanks to you now I know ( minimum oil level sensor )
This was/is a very handy video . It helped me no end. :-)
PCV Valve?
You forgot DPFE sensor. My z19dth has it behind EGR valve on wall. Or like under right windscreen wiper but in the engine bay. (not on engine)
Great video. Thanks
thanks
😊 makes locating simple and w/ part # too. cheers
Hi, by any chance do you have a video on crankshaft replacement?
Thank you for making this video
Thank you so much! ♡♡
Nice , thx for tips.
Thank you!
PCV valve?
Hello pal great videos, how difficult would it be to swap a Astra H CDTI Z1.9 DT engine to Astra H CDTI Z1.9 DTH engine???
Don't know but why would you do that? DT is more reliable. I never wanted DTH
@@fixanddrive The DT engine is making a knocking noise at the moment. I have a another car with the DTH engine. I thought I would try a engine swop if possible.
you need the DTH ECU, the full engine wiring loom (DTH has more sensors and in different locations) and you need to compare the connectivity between the engine wiring loom and the other components of the car and wire them accordingly, then you need to code the ECU to the car via Tech2/MDI
Does a fuel pressure regulating valve on a rail has to click when I apply 12 volt? I tried two and none of them clicked/closed/opened.
Hi, thanks a lot for videos. Could you help me with my problem about code C0050-06 Rear Right Wheel Speed Sensor Circuit Open or Low Voltage. Engine won't start. I've checked rear wheel abs cable. I think problem is with abs cable in engine side. But I don't know where should I search?
I don't think the engine would not start after a faulty ABS loom.
Crankcase breather?
Fuel temperature sensor?
Does it exist on z19dt?
Thanks!
Hello there! I have just one question about z19dt engine... Can I use diesel injectors with end number 165 from Opel to my Alfa originally with end number 276? Both cars are 120hp, both cars are with the same z19dt engine, thanks!
When i press acceleration, fuel consumption shows less when i release pedal. On released pedal it shows 50L. Is there any problem of any sensor? Thanks man.
szkoda ze po polsku nie ma filmiku
what a fuck of an engine to work on
Thanks!!!