350Z VQ35DE Engine Rebuild
Вставка
- Опубліковано 27 лют 2019
- FULL VIDEOS
store.driftingshop.com/techdv... ua-cam.com/users/drifting... 350Z VQ35DE Engine Rebuild (Time-Lapse Edit of a 180 Minute Video)
- Tomei 272 Cams
- Tomei Springs/retainers
- Supertech Valve seals
- Ferra Valve Guides
- Tomei Con-Rods
- Cosworth 11:1 pistons and rings
- ARP Head/Main Studs
- ACL main and thrust bearings
- PPE ceramic coated longtube headers
- All new NISMO timing chains and gears
- BDE motor mounts
- Mishimoto Hoses
- JWT Intake Pop Charger
- Motordyne Plenum Spacer
- Mishimoto Oil Cooler
- Mishimoto Oil catch can
- KOYO 53mm Dual Core Radiator
- KOYO High Pressure Radiator Cap
- Uprev Tune by Road Race Engine
2JZ 240SX Swap DVD
store.driftingshop.com/2jzs14s...
2JZ Rebuild DVD
store.driftingshop.com/mre2jzm...
2JZ/1JZ RX-7 FD Swap DVD
store.driftingshop.com/2jzrxfd...
Engine Tuning DVD
store.driftingshop.com/enredv....
LS1 240SX Swap DVD
store.driftingshop.com/mlimare...
RB25DET 240SX Swap DVD
store.driftingshop.com/rb24sdv...
RB25DET Engine Rebuild DVD
store.driftingshop.com/rbmobud...
RB25DET Head Rebuild DVD
store.driftingshop.com/pheredv...
Rotary Engine Porting DVD
store.driftingshop.com/13bmaro...
Rotary Engine Rebuild DVD
store.driftingshop.com/ma13bro...
S13 SR20DET to S14 Wiring DVD
store.driftingshop.com/ps14wih...
SR20DET Engine Rebuild DVD
store.driftingshop.com/srmobud...
SR20DET Swap S13 to S13 DVD
store.driftingshop.com/srswdvd...
Timing Chain - 350Z Engine Rebuild
• Timing Chain - 350Z En...
Variable Valve Timing Intake Gear - 350Z Engine Rebuild
www.youtube.com/watch?v=BOeA8...
Subtract Crankshaft Diameter from Bearing Bore Diameter to get Oil Clearance - 350Z Engine Rebuild
• Subtract Crankshaft Di...
350Z vq35de Engine Rebuild - Installing Piston and Rod into the Block
• 350Z vq35de Engine Reb...
360 Degree Thrust Bearing - 350Z Engine Rebuild
• 360 Degree Thrust Bear...
Vaseline / Petroleum Jelly in Oil Pump - 350Z Engine Rebuild
• Vaseline / Petroleum J...
PISTON TO WALL CLEARANCE, DOES A RACE MOTOR ALWAYS NEED TO RUN LOOSE?
• PISTON TO WALL CLEARAN...
350Z Engine Rebuild VQ35DE - Piston Ring Tips
• 350Z Engine Rebuild VQ...
Walnut Shells VS Soda Blasting
• Walnut Shells VS Soda ...
350Z Engine Rebuild Preview
• 350Z Engine Rebuild
VQ35DE 350Z Engine Rebuild (Teaser Video)
• VQ35DE 350Z Engine Reb...
- Engine Machining / Assembly by @millennium_motorsports
- Video by @Driftingcom
- Project by @nikomarkovich
- Music by Biz Baz Studio , Aakash Gandhi , Unicorn Heads , The 129ers
| #350zrebuild | #350z | #VQ35DE | #g35 | #Driftingcom - Авто та транспорт
Remembering a time when all of this was foreign to me as a kid. Now being able to do mostly anything on my VQ is a great feeling. Nice work.🙌🏻
Im kinda young 15 to be exact and im tryna learn as much as i can about different types of engines and how they work as of right now i know a lot of engine parts and what they do but i plan on learning more
Great video. As an fyi to others, you can go to settings and reduce playback speed to .25 to get a better view.
thank you, normal speed will be released on Amazon
DRIFTING.COM
That sounds good. I just bought a Z so I will be doing this soon. Thanks for sharing
I tried to purchase on your website. It says June release????? june of what year??
@@driftingcom can you post a link for the amazon video please
You blew my mind actually, thanks for the comment.
Pulling and tearing my knocking vq35de in the next couple weeks, if the block is still in decent shape, I look forward to buying your vid and running through it. Good lookin out.
When will we be able to by the Informative DVD
Have to do some similar work to my vq tomorrow.....need me ride before Christmas
Can you tell me why you put the RTV sealant on the bearing caps like that rather than a beed as per the manual, many thanks
Beautiful, well done.
Let us buy the dang vid already!
Hello are you going to sell anymore of your videos on the VQ35DE? I went to the website and you're out of stock.
Is there an option to purchase this build? link not working for me on site..
Does someone could help me ...
I own a g35 04 coupe is not overheating but it was but now I see the valve cover gasket inside is like cream is a good idea rebuild or change the engine?
test it for a bad head gasket
Can somebody tell me where I can buy this DVD?
How much was the whole thing
you made my head hurt
Any one know a price range for a basic engine rebuild? Just OEM rebuild nothing forged or anything
I got quotes $3100
Gonna run you 7 grand ish but with better stronger parts with a break in and including tune
hey do you know about how much i have to spend if i want my g35 2003 support around 800 hp in the engine i would apreciate if you guys answered thanks
Go to Z1 motorsports and price out a rebuild package with low compression pistons.
@Sam S for a turbo build? No, youd want a low compression like an 8:1 rather than an 11:1 for a naturally aspirated build.
honestly i dont know exactly whats the diference betwen low and hig compression pistons and wich is better
Thank bro i really apreciate you explain that to me 👍🏼 it was really helpful
i want to start a project on my g35 2003 first make the engine ready for later install a twin turbo kit but my goal is get around 800 hp so its a lot of job in the front
Any good rebuild kits ?
ya the one on sale
Anyone know why one of these motors says it's misfiring but is actually running smooth and like new
how many miles and were all of the engine sensors changed?
Just bought the car...ran a $100 portable scantool on it before purchasing. Scan reviled 3 codes P0327, P0304, and P0102. Car has a $1200 titanium exhaust and aftermarket intake. It starts like new, idles without burping or popping. Deleted codes and drive car about a mile. Check engine light (CEL) came back on. Ran scan again and same codes. Bought car for $4k and hauled it home. Removed intake tube, removed MAF sensor and cleaned with MAF cleaner. Switched coils 4 and 6. Deleted codes and car started like new. After listening to it idle for 5 mins without hearing a single pop. Drove it for a mile and CEL came on again P0327 & P0304. Car accelerated without hesitation or lack of power. Returned home and switched the 4&6 plugs this time, both looked like new. Deleted DTC and drove another mile when CEL lit returned home. Same DTC P0327 and P0304. Looked online and found out the P0327 is for harness and P0328 is knock sensor. Removed the light blue connection between engine and firewall. When I went to unhook the dark blue connection. It came off real easy because it had broken. Ordered a new harness today. Hoping this fixes it but got a feeling it's something else. As in...when you say sensors you mean what?
Oh and thank you for your response
Crap...is that why the wire harness was taped to another harness. I remember seeing pics of the harness I needed. It was taped to another harness with a single green connection and 6 gray ones. I thought that part was for the coil packs
@@willk3807 there are a few engine sensors that go bad on the VQ after about every 60/75K miles, have them checked, especially since you just purchased the vehicle, had the last change almost 2 years ago
great video but jeez man, get a tripod, or a steady cam if you're going to do lots of time lapses like this.
we have a tripod and ronin m ,this video was filmed to be watched at a normal speed
@@driftingcom then play it at normal speed
@@jamespearson1374 there are some normal speed VQ rebuild clips already posted
@@driftingcom nobody wants to see tiny 55 second clips this os the video we want at normal speed
@@jamespearson1374 full version will be on Amazon rental and DVD
What if he finished and then realized he still had an extra bolt left from the first step
Depends on which bolt your talking about.. 🤣
😵⚰️
Can you reupload the variable cam gear video... it doesn’t work
link please
Checked again seems to be working now thanks... hopefully you guys get a dvd up for sale soon
2018
The point of this vid was?
Hey man this shit too fast I can’t see the cam install 🤣
You didn't change the oil gallery with a better material. 🤦🏻♂️
ItzCashew it’s a DE not a HR genius also maybe they didn’t film it
@@pushhrodd01 they BOTH has an oil gallery gasket. HR failure rate is higher than DE but theyre still should be changed
good video but too fast...to see details.
ok boomer
@@alexisarias6577 ok boomer
lol music from saw? couldnt find anything more innovative?
Couldn’t watch
Got a headache lol
too fast, i cant see nothing
you ruined this video by speeding it up...
we have a normal speed edit that is not on youtube
@@driftingcom link?
Video Sucks you need proper step by step information so redo the video
some step by step info has already be released on youtube
Timing Chain - 350Z Engine Rebuild
ua-cam.com/video/_YlgY0bF1ec/v-deo.html
Variable Valve Timing Intake Gear - 350Z Engine Rebuild
www.youtube.com/watch?v=BOeA88b3k
350Z vq35de Engine Rebuild - Installing Piston and Rod into the Block
ua-cam.com/video/O7bMORAmJRo/v-deo.html
360 Degree Thrust Bearing - 350Z Engine Rebuild
ua-cam.com/video/xZQdcEniBvE/v-deo.html
Vaseline / Petroleum Jelly in Oil Pump - 350Z Engine Rebuild
ua-cam.com/video/VWraWvKfFsc/v-deo.html
ok boomer
redo deez