1/150 DIY Micro RC Truck & Trailer

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 3,4 тис.

  • @Friendroid
    @Friendroid 2 роки тому +2723

    The video really shows all the work it took to make this micro piece of art. The precision and how clean it looks is admirable.

    • @TheRealDrKel
      @TheRealDrKel 2 роки тому +20

      he left a lot out, like the joining of the front steering system and the drive motor, it does not just decide to stay there

    • @426wookie
      @426wookie 2 роки тому +25

      I can't even imagine how much measuring is going on to make this

    • @TheRealDrKel
      @TheRealDrKel 2 роки тому +7

      @@426wookie you would think a lot, but I don't fully believe it is all hand crafted, half was probrally done my a robotic arm

    • @thereinthetrees_5626
      @thereinthetrees_5626 2 роки тому +1

      @@TheRealDrKel a robotic arm 💀
      Who the fuck do you think this guy is? GM? This is definitely hand made with store bought parts

    • @TheRealDrKel
      @TheRealDrKel 2 роки тому +5

      @@thereinthetrees_5626 he could have dissasembled a couple of cheap toys and sprinkeld a hint of editing and made lie stew. also yes, a "robotic arm 💀" could have done that. this was most likley fake, but if it was real I apollogize to the guy for thinking it was not hand crafted. that steering system screamed fake to me because it is big and thin, it would also need perfect parts to work well, and a couple other things make me think there is a chance it is fake, however it could be real.

  • @Kerosene682
    @Kerosene682 Рік тому +123

    the fact that it includes all the original body pieces and even functioning lights
    there's such an incredible amount of attention to detail and the functionality makes it all the more crazy
    it's all custom made with so much precision and uses every single millimeter of space
    I also love how much control there is, and the maneuverability is awesome
    huge props

  • @NLvideomaster
    @NLvideomaster Рік тому +16

    While a hobbyist might not appreciate this comment... I'll still say this. As a kid I'd have given my soul for a truck like this.
    I used to play for HOURS with little cars and road sets and all that. The attention to detail, turn signals, brake lights, dim lights, it's AMAZING!

  • @youssefmarouani2603
    @youssefmarouani2603 2 роки тому +854

    The slow acceleration and rotational speed of the front wheels to change direction is very realistic, unlike some other rc models that vary in speed very boyishly...👍

    • @kennyc587
      @kennyc587 2 роки тому +33

      Yes its quite interesting how the steering is achieved. However I do wonder how the motor stops running constant once it hits the limit. Is it coded to detect resistance? For example if I were to just keep doing donuts will it hurt the motor.

    • @jetjazz05
      @jetjazz05 2 роки тому +29

      Crazy to think a hobbyist with understanding of their goals is able to outdo a mass produced item. I've never understood why there can't be one guy on the r&d team for these companies to make products that rival what hobbyists can do, but I guess that's the thing you run into when the bottom dollar is more important than the product.

    • @tomozex
      @tomozex 2 роки тому +11

      @@kennyc587 probably hardcoded max number of rotations measured with the phototransistor at 3:22, but you could do just what you are talking about with a reed switch somewhere in the motor circuit

    • @EchoBuildsThings
      @EchoBuildsThings 2 роки тому +1

      @@kennyc587 they show two more photoresistors at either end of the rack, so using that i guess

    • @Ezio470
      @Ezio470 2 роки тому +9

      @@jetjazz05 There's much more work required for a toy that is to be mass produced. But there are some which are mass produced, the TURBO RACING C72 for example is a good one.
      The market is very niche tbh and does not justify the R&D costs sometimes. At the end of the day what sells most is the cars that drives fast and drifts and that's where most companies chose to invest.
      If this guy somehow is able to make his own circuit boards and give the schematics, then i guess it would be easier for other people to build one themselves with easier soldering.

  • @zUltra3D
    @zUltra3D 2 роки тому +946

    The fact that you can signal a turn is mindblowing

    • @KermitDaOG
      @KermitDaOG 2 роки тому +24

      Honestly like wtf 😂

    • @DualDesertEagle
      @DualDesertEagle 2 роки тому +13

      @@KermitDaOG As far as I understand it does that whenever u steer left or right far enough.

    • @divraj_doimari
      @divraj_doimari 2 роки тому +4

      @@DualDesertEagle good observation

    • @conancorcoran5367
      @conancorcoran5367 2 роки тому +15

      @@DualDesertEagle I think that it’s activated by a button, check 8:14, you can see them on the top right of the remote

    • @DualDesertEagle
      @DualDesertEagle 2 роки тому +5

      @@conancorcoran5367 Looks like ur right, when he drives around the 2 bottles of paint he's signalling right long before he starts turning right and keeps doing so regardless of steering angle.

  • @モグ-w6r
    @モグ-w6r 3 місяці тому +4

    男はこういうの好きな人多いと思うなぁ😂
    一から作り上げていくのがまた憧れる😊

  • @alzack112
    @alzack112 2 роки тому +383

    You know what's more amazing than your precision? It's your patience to work with this.

  • @kandredfpv
    @kandredfpv 2 роки тому +324

    What amazes me is how much gear and wiring you were able to fit into that tiny truck chassis. When I saw you adding those led lights I was thinking, gee that's an overkill, but in the end they helped with the realism. It really did look like you'd just shrunk down a real semi and trailer. You are a master craftsman!

  • @raosaudahmedk8895
    @raosaudahmedk8895 Місяць тому +3

    Hello. I'm 17 years old. My inner child is just crying out of joy. It's like Doraemon's gadgets just became a reality. Thank you... Thank you very much 😊

  • @kalimagik4574
    @kalimagik4574 2 роки тому +239

    When you did that turning manuver on your laptop that was soo cool because thats how us truckers do it in real life when we are short on space at a warehouse or a dropyard. Really cool i love this 100%. The only thing that could make this even cooler is if you built a mini warehouse with mini forklifts that could load and unload the back of the trailer. your an amazing craftsman and engineer well done!

    • @weirdfkit
      @weirdfkit Рік тому +2

      Yeah look who says a believer

    • @zynifi
      @zynifi Рік тому +4

      @@weirdfkit ??

    • @gbresaleking
      @gbresaleking Рік тому +1

      And loading ramps to back up to , and maybe technical areas of the parking lot and he could set missions for himself like make it past the broke down car and roadwork in parking lot to loading ramp 6 to offload goods then make way back out to next delivery

  • @nezvanova_
    @nezvanova_ 2 роки тому +90

    This is insane, as a freshman in electronic eng. it's exactly the type of project I was idealizing. Thank you. An amazing work.

    • @regab4786
      @regab4786 Рік тому +1

      I have any knowledge of electronic or anithing related but I would like to learn how to to something like this. What would You say I need to learn Ford doing something like this proyect?? And You think is it possible someone like me could be able to do it?? At the end I know it deppends on how much effort I put on try to do it and learn. I hope You stay well, and My apologize in advance for any English mistake cause I'm not a native English speaker.

    • @vennox1598
      @vennox1598 Рік тому

      @@regab4786 no i dont think you will be able to do it

    • @Das_Soham
      @Das_Soham Рік тому

      @@vennox1598 tf is wrong with u

    • @Das_Soham
      @Das_Soham Рік тому

      @@regab4786 there is nothing u cant do .. just work on it and one day u will be able to do it

    • @schrodingerscat1863
      @schrodingerscat1863 10 місяців тому

      @@regab4786 There are many tutorials online covering this kind of thing but it isn't something for a beginner, just building the basic circuit on a breadboard would be difficult for a beginner never mind the microcontroller programming and miniaturisation, which shows some excellent soldering skills. If you really want to learn I suggest following some tutorials for this kind of remote control, build up the circuitry on breadboard. Then when you are comfortable with that you could consider building something up on perf board like in this project. It will be a steep learning curve in the beginning though.

  • @djmaury
    @djmaury Рік тому +1

    Every time I look at this genius and his luminous creations I really want to cry, to see so much art and that he can't do something for those of us who are collectors willing to pay regardless of the cost of his ingenious work, and not leave your contact for to be able to negotiate, well the saying goes! Money can't buy everything, it's not fair.

  • @msmith2961
    @msmith2961 2 роки тому +36

    Dude is *ridiculously* good at making these real life micro machines

    • @makik3762
      @makik3762 10 місяців тому

      Agreed. I do HOe mini layout and am totally impressed by this!

  • @TheBypasser
    @TheBypasser 2 роки тому +384

    Awesome build! The only thing I'd add (though I doubt it would have enough space to fit in the truck) is a wireless power receiver. Charging the thing off a tiny gas station would be the kill!

    • @sheilaolfieway1885
      @sheilaolfieway1885 2 роки тому +11

      maybe to charge the trailer battery.

    • @Ezio470
      @Ezio470 2 роки тому +23

      yeah. could make a tiny prop 'gas pump nozzle' using the micro DC plug that old nokia phones used. I think the creator of this micro rc has all he needs to make one.

    • @DanDan-li4hr
      @DanDan-li4hr 2 роки тому +13

      add speakers somewhere so it can produce actual engine and break sound

    • @yahiaaymen7876
      @yahiaaymen7876 2 роки тому +3

      @@sheilaolfieway1885 I was about to say the same thing

    • @drache444444
      @drache444444 2 роки тому +3

      i mean, theres the lines going from truck to trailer irl. you'd lose the ability to unhook the trailer, but it should be doable

  • @indiocabuloso157
    @indiocabuloso157 Рік тому +12

    O roncadinho do motor é show! Bela obra de arte! Que continue fazendo projetos maravilhosos como esse.

  • @alessandrotorboli3782
    @alessandrotorboli3782 2 роки тому +266

    What surprises me the most is the lighting, it's absolutely magnificent! 😍

    • @macksuting6263
      @macksuting6263 2 роки тому +2

      True it makes it look more closer to the real thing 👌

    • @spiff311
      @spiff311 2 роки тому +2

      Me too

  • @mattsadventureswithart5764
    @mattsadventureswithart5764 8 місяців тому +3

    Not only did you create something fabulous, it looks like a lot of fun to play with!

  • @juarezcampos9779
    @juarezcampos9779 2 роки тому +112

    Haverá sempre algum ser humano com uma habilidade inimaginável a ponto de nos surpreender. É realmente admirável seu trabalho, parabens!

  • @882952
    @882952 2 роки тому +23

    Wow, just WOW. This is incredible work. I could reproduce something like this in a more reasonable scale, but never in such a tiny form factor. The frustrations of moving around these tiny parts, trying to solder the tiny wires, lining up and fitting all the tiny tiny tiny components... I would have destroyed the thing in a fit of frustrated fury ten minutes into the project. And the details - it not only steers but it's PROPORTIONAL steering! And turn signals - freaking TURN SIGNALS, lol!!. You are a technical artist. Thanks for sharing this joyful little creation, it was very cool to watch the build process. Can't wait to look through your other vids now. =)

  • @ogamingscv
    @ogamingscv Рік тому +2

    I am so impress with the small form factor you worked with! And the lighting, head lights, indicator lights, hazards, reversing and even break lights for deceleration?! Crazy! Absolute work of art! Keep it up :D

  • @allthingsgilmour
    @allthingsgilmour Рік тому +25

    This man should be extremely proud with the amount of work, skill, knowledge, and craftsmanship put into this truck! You have my admiration sir!

  • @夜星月見猫
    @夜星月見猫 2 роки тому +35

    細部へのこだわりと、このサイズに収めてしまうのが凄い。

  • @Ni5ei
    @Ni5ei 10 місяців тому +2

    What a piece of craftmanship!
    Awesome job. The only thing missing is the beep signal when in reverse 😜

  • @_hanz73
    @_hanz73 2 роки тому +17

    I really thought that he was going to put most of the parts into the trailer but no he somehow managed to put all the main stuff into the truck itself, Amazing!!

  • @dampflokdrei
    @dampflokdrei 2 роки тому +6

    My comment is just two words: absolutely amazing. I have never seen a RC truck as small as this one.

  • @abdullahafraheemkhan858
    @abdullahafraheemkhan858 Рік тому +1

    his electric components get more complex every time, you got some talent

  • @ashpjangde
    @ashpjangde Рік тому +9

    A masterpiece. The amount of hardwork you've put in it is truly amazing.

  • @genmanyuri
    @genmanyuri 2 роки тому +4

    это очень круто, помню я в 1993 году пытался тоже машинку на радиоуправлении так переделать, но деталей было столько, что не влезли в корпус )) в итоге гонял без корпуса ))

  • @waynecampbell9714
    @waynecampbell9714 Рік тому

    Absolutely brilliant the most precise soldering I've seen in my entire life. The steady hands you need to do this, this guy has talent

  • @ankanpradhan9724
    @ankanpradhan9724 2 роки тому +39

    Hats off to this man 😳⚡😱 absolute legend

  • @nafief
    @nafief Рік тому +4

    You have to be an E.T to make this piece of art, your patience is unreal, my respect

  • @thetinysideoftiny7625
    @thetinysideoftiny7625 10 місяців тому +1

    INSANE MICRO-ENGINEERING!!! WOW!!

  • @lilguygamingandmore
    @lilguygamingandmore 2 роки тому +14

    who knew you could jam pack so much into such a tiny toy with the art of micro electronics. This dude even got the turn signals! Kind of a large controller for such a tiny toy, but very impressive work!

  • @bretknight408
    @bretknight408 2 роки тому +42

    Such an incredible piece of work that clearly shows the intricacies applied in creating such a work of art and mechanics all rolled into one.

  • @Giddykippa65
    @Giddykippa65 2 роки тому +14

    thats just mind boggling how you can fit all that into something so tiny and the soldering of those tiny wires just wow you are amazing

  • @jetcyclezero8907
    @jetcyclezero8907 Рік тому +2

    Much more fun to watch than the 200+ mph RC's on a runway.

  • @foxhazhax4845
    @foxhazhax4845 2 роки тому +11

    I solder under a microscope for a living and this guy has my patience and steady-handedness beat by a looooong shot. Respect, fam

  • @rokiizumi
    @rokiizumi Рік тому +16

    「いいね!」じゃ足らない。星5つ! 素晴らしすぎる。

  • @сашагемберг
    @сашагемберг Рік тому

    *_Молодец!!! Мое почтение._* 🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄🙄😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎

  • @jkormath
    @jkormath Рік тому +5

    You have a very steady hand, and the precision with which you work is mind boggling 👍👏

  • @SeiRruf
    @SeiRruf Рік тому +6

    Your work is absolutely amazing! Attention to detail is always right on spot. Bless you and your sharing of all the schematics and programming to make this happen!!

  • @ПавелПавлов-ч9с
    @ПавелПавлов-ч9с 9 місяців тому +2

    Этот человек действительно делает то что он любит и умеет, респект👍

  • @TheIsekaidNinja
    @TheIsekaidNinja 3 місяці тому +3

    The lights were amazing enough but bro even added indicators 🔥. Amazing !

  • @crazyhorse1076
    @crazyhorse1076 2 роки тому +6

    😃🤌 INCRÍVEL A CRIATIVIDADE E A CAPACIDADE DE FAZER ALGO ASSIM !

  • @dr.harshalpadole8206
    @dr.harshalpadole8206 Рік тому +1

    One of the most beautiful and satisfying video ever❤

  • @hondahirny
    @hondahirny 2 роки тому +11

    Beautiful work 😊 Amazing to see something so small with so many features.

  • @ottotater2787
    @ottotater2787 2 роки тому +4

    Fabulous.
    I particularly like the steering mechanism because it's so functional but the whole thing is just fabulous.

  • @ketanpethe5982
    @ketanpethe5982 Рік тому

    यह कहना उचित होगा कि इसमें से काफी कुछ 3डी प्रिंटेड हो सकता है, और यही मैंने भी सोचा था, लेकिन जब आपने हाथ से छोटे घटकों को स्थापित करना शुरू किया, तो मुझे वाकई में बड़ा आश्चर्य हुआ। बोहोत बढ़िया! 👏

  • @devnarayan5458
    @devnarayan5458 Рік тому +3

    Just wow! Amazed by how much detailed everything looks! I salute your patience brother!

  • @DJvvAZZ
    @DJvvAZZ 2 роки тому +10

    Amazing! I own a Tamyia 1:14 truck, and for years have dreamed of building a tiny scale truck. Didn't think it was possible... Now I know it is! Thank you!

    • @AndroidMkII
      @AndroidMkII 2 роки тому

      i clicked on the timecode when i had this time

  • @jaijethwa4243
    @jaijethwa4243 Рік тому +1

    hats off.! Your technical stuff and the knowledge you applied to the toy truck was insane. Engineering at its finest. LOVED your work sir.

  • @artbyrobot1
    @artbyrobot1 2 роки тому +4

    this is mind blowing! Your micro electronics are super inspiring! You could build any robot!

  • @Sohave
    @Sohave 2 роки тому +6

    Much more sophisticated and with much better driving ability than my 1:160 scale Faller to Rc conversion. This is very impressive! I would love to replicate this buid, but I lack the electronics skills you have. I wish that these servos and circuit boards were commercially available.

  • @worobaaer7010
    @worobaaer7010 Рік тому +1

    That precision, that complete master of electronics... Pure genius

  • @CarNerd7
    @CarNerd7 2 роки тому +7

    Absolutely insane!! Amazing detail!! Truly beautiful honestly I wish I could do that

  • @rsz90182
    @rsz90182 Рік тому +1

    Man, this is really the far side of UA-cam that I end up watching at night. This blows my mind!!!

  • @ТимурГайнуллин-ы2ч
    @ТимурГайнуллин-ы2ч 2 роки тому +4

    Это просто великолепная работа!

  • @kjamison5951
    @kjamison5951 2 роки тому +48

    Magnificent! The detail is astounding and the bespoke installation of the RC components is stunning.
    You have some real estate in the trailer, what about a sound module? Revving engine and reversing beeps to start?
    Incredible work. You deserve for this to go viral!

  • @KantaBanes
    @KantaBanes Рік тому

    Great, stupendous, colossal. There is curiosity, ingenuity, delicacy, finesse, electronics, programming. I have no words to accurately describe this work of art.

  • @DEADB33F
    @DEADB33F 6 місяців тому +3

    Truly amazing work. Although you missed a trick by not having a mechanism in the trailer to raise/lower the landing legs to hitch/unhitch the trailer..
    Then you could have multiple trailers and have the tractor unit send a signal to the trailer telling it to hitch/unhitch, raise/lower its legs etc.

  • @kennethcoughlan9163
    @kennethcoughlan9163 5 місяців тому +3

    Incredible work.. well done! Perfect result

  • @hiroyukibai
    @hiroyukibai Рік тому +1

    信じられない…すごい技術で驚きました。

  • @PlayFull-B
    @PlayFull-B 2 місяці тому +3

    Being an Introvert/ambivert you'll never get bord alone😂😂😂

  • @nutwiss
    @nutwiss 2 роки тому +110

    Beautiful work. Your deadbug stuff is lovely. Just a thought - seeing as you've got that massive (relatively) lipo in the trailer, could you add a nice sound module? There are some lovely mobile-phone style speakers with really good fidelity which would suit this scenario really well.

    • @somedudewithakeyboard
      @somedudewithakeyboard 2 роки тому

      Do you have a link where one could find such speakers?

    • @nutwiss
      @nutwiss 2 роки тому +4

      @@somedudewithakeyboardThe Adafruit Stemma speaker is rather good, you might need to rework the board though for size, but the driver itself is lovely.

    • @osmanpasha_diy
      @osmanpasha_diy 2 роки тому +2

      @@somedudewithakeyboard maybe any of iphone speakers on aliexpress? iphone 5s speakers are particularly small

    • @vinyltheif
      @vinyltheif 2 роки тому +1

      Hi nice work. I've fitted audio on some of my matchbox speedkings & superkings models, I've been using a speaker from scrapped products at a company I work for (NDT instrumentation), they're 18mm x 12mm & excellent quality (our products are very high quality), I doubt Alibaba would list any that comes close to them, I'll find out fro our purchasing department where we buy them from, & the spec for you. This was my first audio one; ua-cam.com/video/BRICotqcw4o/v-deo.html

    • @somedudewithakeyboard
      @somedudewithakeyboard 2 роки тому +4

      @@nutwiss That one is way too big for 1:87 and 1:150 scale models.

  • @歯車比堂あたあるふぁ

    外国のチャンネルだと思ってみてたらダイソーバッテリーとタミヤの塗料が出てきて、なんかほっこりしました。

  • @thehernandezmediacorporation
    @thehernandezmediacorporation 2 роки тому +5

    To an extent, 1/150 is very close to N scale for model railroading, and so this would be yet another awesome accessory to add to my layout.

    • @willfraser5105
      @willfraser5105 Рік тому

      Imagine if this were adopted by N-Scale manufacturers and part of the T-Trak spec. That would be awesome. KATO make it happen!

  • @filsdedieu100
    @filsdedieu100 2 роки тому +4

    Incroyable et formidable ; merci 😀

  • @robbyningrat6023
    @robbyningrat6023 Рік тому

    cool truck, great way of overhauling🎉👍🔥

  • @brentlelliott
    @brentlelliott 6 місяців тому +3

    Beautiful craftsmanship good job love watch your videos

  • @Razorb29
    @Razorb29 2 роки тому +6

    This reminds me of those “zip zaps” that radioshack here in the US they used to sell a long time ago but much more intricate. Very well done

  • @level525
    @level525 Рік тому +1

    Безусловно, МОЛОДЕЦ!!! БРАВО!!!

  • @maybe138
    @maybe138 9 місяців тому +4

    Some UA-camrs can do those bad ass things, imagine what a government can do...

  • @STUDIO_YF
    @STUDIO_YF Місяць тому +4

    This is amazing. I thought you would put some of the electronics in the trailer but you didnt! (Correction, I meant that the cab could drive separately from the trailer)

  • @shubhamnath5119
    @shubhamnath5119 Місяць тому +2

    Even your trailer get that indicator light. That's cool 😎

  • @jhaysonarmiellachanibre5075
    @jhaysonarmiellachanibre5075 9 місяців тому +3

    he knows technology more than us

  • @AbeLie
    @AbeLie 6 місяців тому +3

    that's crazy. amazing work 👍

  • @noddy176
    @noddy176 Рік тому

    I found building 1:10 Monstertrucks with led lichting hard evertime. This is another level. Love it!💖

  • @adastra102
    @adastra102 6 місяців тому +3

    It's really fantastic!

  • @derekmacdougall3011
    @derekmacdougall3011 Рік тому +4

    Wonderful, it actually looks like a real truck in some of the shots with lights on, really enjoyed the little build sequence ,but the RC part controlling the micro hgv was super👍

  • @zisofficial680
    @zisofficial680 2 місяці тому +1

    Meletakkan part part kecil itu membutuhkan ketelitian dan kesabaran,,,, keren🔥

  • @parabina
    @parabina 7 місяців тому +3

    [Q] How long did it take to create it?
    [A] It took several months.
    Sheeshh respect the amount of dedications.
    love your content.

  • @KOTXD159
    @KOTXD159 8 місяців тому +4

    Харооош чел!!!
    😮

  • @JohnCarey-c9k
    @JohnCarey-c9k 9 днів тому +2

    Even the blinkers work! 😮👍💯

  • @aeg2708
    @aeg2708 2 місяці тому +3

    Este tipo es el superhipermegablastermasterchampion miniaturista de todo el mundo. Ademas que es un crak en electronica.

  • @osmanpasha_diy
    @osmanpasha_diy 2 роки тому +5

    This is a masterpiece! I wonder how you chose all the gears to match each other.

    • @diorama111
      @diorama111  2 роки тому +11

      Thank you!
      I've taken apart many digital cameras and have a lot of gears.
      I chose module 0.2 gears and also the ones that match each other.

    • @osmanpasha_diy
      @osmanpasha_diy 2 роки тому +2

      @@diorama111 ah, I see. I tried to look for such small gears on aliexpress, but could not find them.

    • @skarloeyexpress4353
      @skarloeyexpress4353 2 роки тому

      @@diorama111 Have you made a video on how to make the controller you used

  • @cetocoquinto4704
    @cetocoquinto4704 Рік тому

    This guy is crazy! The precision of a watchman..make lota of these! You will be a rich guy. Cheers from philippines! Im really impressed! Even thextien signals are working.

  • @sypeiterra7613
    @sypeiterra7613 6 місяців тому +3

    hey you should probably check your Iron intake, your fingernails have some slightly deep vertical grooves forming on them. and once iron deficiency gets too bad it's nearly impossible to get it back up cause you need iron to absorb iron.

  • @YassineKAOUANE
    @YassineKAOUANE 2 роки тому +5

    awesome.
    it sounds as if there's tiny engin in there too.

  • @waynecampbell9714
    @waynecampbell9714 Рік тому

    I love anything RC and I got to say you have a lot of talent. I couldn't do this with a Hot Wheels car twice the size of a normal one. Anybody that knows anything about RC knows that this is absolutely amazing incredible how he was able to do all this with such a small and without having to use all or nothing steering 😮👍

  • @극한뉴비
    @극한뉴비 3 місяці тому +3

    購読と通知 いいね 埋めて行きます これからもっと多くの映像をお願いします 小都市も一度作ってみてください

  • @RamiSlicer
    @RamiSlicer 2 роки тому +4

    How do you tell what wires are which? This is amazing, so much more precise than anything I could ever do!

    • @diorama111
      @diorama111  2 роки тому +2

      Thank you!
      I cut a small piece of masking tape and marked it, applied it to each wire.

  • @honeman
    @honeman 6 місяців тому

    The fact this guy show all his trucks function after making it in a proper time slot was good

  • @v1x4z
    @v1x4z 2 роки тому +4

    Excellent build, your videos always blow my mind. I wonder how much cargo can this little lorry haul?

  • @yoshihiro628125
    @yoshihiro628125 2 місяці тому +3

    素晴らしいです🎉
    売って欲しい!

  • @myhonchosg
    @myhonchosg Рік тому

    Very cool micro RC truck! ❤

  • @jdmmortal
    @jdmmortal 2 місяці тому +3

    Bravo 🙌🙌🙌

  • @fabrica_mebliv
    @fabrica_mebliv 4 місяці тому +5

    👏👏👏 чудова робота. Ви продаєте, яка ціна?

  • @fog345
    @fog345 Рік тому

    This guy transform cheap plastic truck car to expensive and complex rc truck. Nice video

  • @emilianoc.8249
    @emilianoc.8249 3 місяці тому +3

    Lo so che sono un pignolo, ma non potevi mettere anche il cicalino che suonava durante la retromarcia? 😅

  • @techideas6876
    @techideas6876 3 місяці тому +3

    how you joined the tiny aluminium parts together?