I think you'd get better performance without the elbow both because of the friction losses of the hard 90 degree bend and also due to the loss of the fan suction which would add the forward thrust if oriented horizontally.
cool idea. what if the you used the EDF as a water Jet turbine. that means spinning it inside tube that is under water. Sweet lake water won't destroy the motor in short terms. But it might been interesting to see how that would have worked out. maybe more speed?
Very very clever! I have 3 ideas for mods: 1) controllable trim tabs on the stern. This will allow you to tune it for a smoother high speed plane; 2) make the bottom smoother/slicker. Paper and packing tape would be lightweight; and 3) if you want the EDF style poweplant, Consider a "BDF". Cheaper, more robust, and more efficient with your battery. Great job!
I wonder if they apply this style of tech on military boats or ships. Would it be possible that the submarines won't be able track this ship using their sonar since the propeller is no longer under water? I'm thinking if this would still creat a lot of noise underwater
@@WKRhomemade sebabnya tak kira kapal,bot,heli kdg2 dia boleh gerak sendiri which is about safetylah..then kalau nak switch off pulak tutp yg receiver dulu then baru transmitter....cthnya kalau kapal prop electric kdg2 bila kita off transmitter dulu automatic dia akan pusing kipas tu . Itu yg bahaya tu...maklumat tambahan kalau nak bind baru kita switch on receiver dulu dan kemudian baru kita on transmitter utk connectkannya
Great project! One suggestion, I think you’re having trouble turning left because of the counter torque of the motor. Angle the pipe slightly to the left side (2 degrees or so) and I think turning should be easier. Also maybe extend the rudder into the water a little? I love the simplicity of this and it looks nice too. Nice job.
Good start - I will suggest that instead of using an 90 degree plastic pipe, use a dual 90 degree pipes to form an S intake. The air flow will be smoother. Try it out and see what happens. Best
Very nice build! Kudos to you sir! I made a very simple rc boat that anyone could replicate out from an old rc car. Since I am not a pro in building things.
Nice job sir, ive been looking at designs to make a gps guided fpv boat and really like your design and propulsion setup, what size air duct/fan/motor and pvc elbow are you using?
انا عملت قارب صاروخي لشخصين بمحركات بصيطا كهربائية ذاتيت توليد الطاقة وبدي اطلع فيه من شواطأ لبنان الا مابعد قبرص رح اخد طريق نصف البحر الا المجهول وانا واثق اني رح اوصل لشي مكان
@@c.l.pitman1760 But it could have been kept out of the water also, similar to a hovercraft. Keeping the rudder alone underwater would help in steering
Osam idea hi but aap agar nozel ko chuta kardete to tharast badhaya ja sakta tha
Thủy phi cơ sáng tạo chế tạo rất hay
Good boat
I think you'd get better performance without the elbow both because of the friction losses of the hard 90 degree bend and also due to the loss of the fan suction which would add the forward thrust if oriented horizontally.
Thanks For Your Feedback
Žádný šroub ... žádná kola to je nejlepší
Awsome bro !! You just need a longer rudder. Nd perff ! :).
làm một cái co vuông chụp lên động cơ hướng góc về mũi tàu sẽ tăng được tốc độ đó bạn
Xài cái co lơi chắc mạnh hơn.
☆☆☆ OUTSTANDING & GENIUS ☆☆☆
Very good mini boat amazing pro
cool idea. what if the you used the EDF as a water Jet turbine. that means spinning it inside tube that is under water. Sweet lake water won't destroy the motor in short terms. But it might been interesting to see how that would have worked out. maybe more speed?
i am done many
@Alejandro Jaiden Woah! any updates?
Its not only a boat, cuz it can run above water!! I need that:)
Je vin à si 6 du matin
Je t'aime bises bisous
Je t'aime bien pour toi aussi pour toi aussi mais que toi tu me dis ça pour toi
😘😗❣💕
Very very clever! I have 3 ideas for mods: 1) controllable trim tabs on the stern. This will allow you to tune it for a smoother high speed plane; 2) make the bottom smoother/slicker. Paper and packing tape would be lightweight; and 3) if you want the EDF style poweplant, Consider a "BDF". Cheaper, more robust, and more efficient with your battery. Great job!
Thanks for your feedback
May as well just blow the air horizontally for max efficiency like an air boat in the Florida keys.
Kreatif betul 👍👍👍👆
видос крутой нет слов за музончик спс удачи тебе и продвижения всё кратко и понятно!!!
New idea 👍
Thanks a lot
Love this guy used to watch his videos when I was 5 or 6 years old
Every time never turned the TV off until my mom or dad said to
Really awesome design and video . Thank you
Thank you! Cheers!
Nice 😲😲😲😲😲
Very nice
Creatividad 👏👏👏👏👏👏saludos desde Mexico 🇲🇽
Easy and simple ，good toy.
I wonder if they apply this style of tech on military boats or ships. Would it be possible that the submarines won't be able track this ship using their sonar since the propeller is no longer under water?
I'm thinking if this would still creat a lot of noise underwater
Thanks for your feedback and ideas
One tip...always switch on your remote control first then the receiver..... Btw good job..keep up the good work
OK
Kenapa kena on transmitter dulu baru receiver bro?
@@WKRhomemade sebabnya tak kira kapal,bot,heli kdg2 dia boleh gerak sendiri which is about safetylah..then kalau nak switch off pulak tutp yg receiver dulu then baru transmitter....cthnya kalau kapal prop electric kdg2 bila kita off transmitter dulu automatic dia akan pusing kipas tu . Itu yg bahaya tu...maklumat tambahan kalau nak bind baru kita switch on receiver dulu dan kemudian baru kita on transmitter utk connectkannya
@@hakimmunim4594 ohh gitu, tq info 👍
@@WKRhomemade bereh bossku
Bravo, simple mais opérationnel
Bagus bgt...ok...
Great project! One suggestion, I think you’re having trouble turning left because of the counter torque of the motor. Angle the pipe slightly to the left side (2 degrees or so) and I think turning should be easier. Also maybe extend the rudder into the water a little? I love the simplicity of this and it looks nice too. Nice job.
Great point!, Yes, Thanks for your feedback
Bravo
Great
Adipoli 👍
Cool idea
Thank you! Cheers!
VERY NOICE
Good start - I will suggest that instead of using an 90 degree plastic pipe, use a dual 90 degree pipes to form an S intake. The air flow will be smoother. Try it out and see what happens. Best
ok, i will try it
Or try a 2x 45 degree s shape for better airflow 😁
@@niels8096 That should work as well - good input!
you should put the rudder two times as long so its well under the water
Very Nice amazing
Awesome 💖💗💟💖
Very nice
Very cool. I imagin u thinking of endless mods for it.
amazing design
Thank you! Cheers!
Great at 6:32. It is also an hovercraft !!
Nice work
Thank you! Cheers!
Wow,🤔🤗🤩
honestly you give off weird diy video vives but you make pretty amzing things
Wow so good. I like it
VERY GOOD
Thanks
Always turn on the tx first before the rx, otherwise you may loose your boat.
No one likes a loose boat
hay qua ban oi ,
Nice video 👌👌👌👌 bhai
Cool concept, perhaps turn the 90 degree pipe instead of a rudder 🤔
Wow nice
I saw many rc boat videos but this is satisfactory great job
Thanks
Very nice build! Kudos to you sir! I made a very simple rc boat that anyone could replicate out from an old rc car. Since I am not a pro in building things.
Thank you very much!
I like the part that you don’t give us the measurements cause it makes me use my brain 🧠 lol 😂
Here comes the first commenter
@William Woodman u r in correct
Joooossss hebat bosss
very good
Thank you! Cheers!
mann thats cool awesome stuff
Nice video Bro👌
Excellent.
Thank you! Cheers!
You are best in the world good lucck💕💕💕💕💕💕💕💕💕💕💕
*blessings*
you cant turn while gliding, you should thrust your engine while you want to turn, am i right?
Amazing
Nice job sir, ive been looking at designs to make a gps guided fpv boat and really like your design and propulsion setup, what size air duct/fan/motor and pvc elbow are you using?
I'm going to have a go at one of these. My ducted fan is 70mm which fits exactly inside a drainpipe....
Hi, can I power that kind of motor with 3 AA batteries?
wow it's really amazing
amazing design and build
Nice
superb
That is awesome
You are the best dude
Dai no like only my like
I like that!
Индус молодец слепил из того, что было...
Super creative solution!! Looks good! Inspired me to make a similar version - thank you
Go for it!
انا عملت قارب صاروخي لشخصين بمحركات بصيطا كهربائية ذاتيت توليد الطاقة وبدي اطلع فيه من شواطأ لبنان الا مابعد قبرص رح اخد طريق نصف البحر الا المجهول وانا واثق اني رح اوصل لشي مكان
Gedê xelkê çiqas jihatî ye. 👍
Good luck👍👍👍
Very good 👍
Thank you 👍
Waaaaaaw i love this
The Hamilton jet unit might be of some interest to you to upgrade the open end of your engine set up. Thank you for sharing.
What fan motor is that? I love this
EDF motor
amazing
Awesome
Its cool bro
Nice design. But why did you keep the ducted fans with elbow? You should hv keep it straight. It would be more powerful
Probably to keep water from getting in/on motor.
He could have used a 45degree PVC instead of a 90 degree but it's his design..
@@c.l.pitman1760 But it could have been kept out of the water also, similar to a hovercraft. Keeping the rudder alone underwater would help in steering
Why not straight pipe on top?
Good not clickbait. Great idea btw.
Nice bro
Lovely 💖💗💟💞💖
Yeahhh heehee😀😀😁😁😄😄
Complimenti
I dont see the link for the motor and the battery in the description. Can you provide the link please.
Great 😍
So nice
Lovely 💖💗💟💞💗
That battery looks scary...
Where can i buy the fan?
Nice job. Motor rpm;
Yes, thanks
what does total come down to in usd?
You should make a smaler exhaust hole, for decrease power loss
#AddToMedia 👉 GUANDEM 👍👍👍
ใช้มันคือ เทคโนโลยี ทดสอบ ขั้นสูง ใช้กัน
Where is the buying link of EDF fan..????
Own creation is not atall good it is free of cost that's what you do right
He needs an RC factory