"Ikea should include a link to your channel in the assembly guidelines paper. It was not shown precisely, and I was unsure about what I had assembled. It looks pretty much the same. Thanks, buddy."
Thank you I bought the same wardrobe I did the boxes well. But got stuck with doors. And after searching for a while I found your video. You are life saver I couldn’t do it without your video as you showed it’s become so easy. 😊 I’m glad you made the video with all information.
Hello, very helpful video, in my package I have 2 rubber strips but one metal piece and 2 side metal pieces, can you please suggest what’s the second rubber is for?
Thanks! But there’s only one metal bar, if there are two rubbers, there should be 2 bars also? And one dust strip which I don’t know on which door it should be placed, Is it alright to add them after installing the doors?
Hello! I have mounted this same slide doors. I finished but the doors vibrate when I close them, especially the outer door, what could be the issue? Thanks a lot
hey man! i am struggling with the steps you took from 6:30 till 7:00 in this video. can you please share the exact steps you took to secure this rubber strip and metal panel to the door? will it always be the outside door?
Thanks for your video. This is very clear, but unfortunately it did not work out well for me. My problem is that after hanging I have an opening at both top corners. Can you help me please🙏
Brilliant job. The wardrobe looks amazing. Did you push it to the side wall after installing? And was it still intact without affecting the sliding doors?
@@kayblossom8505 Yes! totaly. You can use the wardrobe without doors. The pax wardrobe is used in open closets as well that don't use doors. Then, if you decide to put them, you can. The part3 of the series shows you how to assemble the drawers ;)
I can’t understand how to get the second door on.. can’t get them side by side and when I put outer one on top of inner one ,I can’t get them to completely close due to the top hardware running into each other, how can the doors go in that same track . I have tried everything for hours so discouraged
I bought a similar wardrobe but i am still not getting how to place the metal with that glued rubber thingy on the outer door. There is no point given. Do we have to screw it ourselves?
@omarshaikh1 Ok I think I found a way to fix it. I hadn't attached the aluminum bar in the right direction. The right way is similar to this video : ua-cam.com/video/MWh20ET7gg0/v-deo.htmlfeature=shared&t=337 . For me it works :)
Attempting to install this but the bottom of the sliding door does not click on, there is a significant gap. Has anyone faced this problem? Or have any idea on how I can solve this, it’s extremely frustrating 😰😰
Probably the hardware of the doors are shifted. The outside door as to be on top of the inner door. In the next month i am going to upload the assembly of the new pax wardrobe 😉
Ana, verifique se as rodas estão as duas na mesma calha. As rodas no suporte pequeno são da porta interior (em baixo) e as rodas do suporte maior são da porta exterior (em cima). Se bao conseguir amanha mostro como estao as minhas num short 😊
WARNING! It is NOT recommended to use a drill. Use a screwdriver, the density of the material is is like cardboard. My second recommendation is do NOT step in the box unit, it’s easy to break! Hammer ALL the nails all around the back, otherwise the back panel will be wavy.
"Ikea should include a link to your channel in the assembly guidelines paper. It was not shown precisely, and I was unsure about what I had assembled. It looks pretty much the same. Thanks, buddy."
Thank you very much for your kind comment! I really appreciate it
Thank you
I bought the same wardrobe I did the boxes well. But got stuck with doors. And after searching for a while I found your video. You are life saver I couldn’t do it without your video as you showed it’s become so easy. 😊
I’m glad you made the video with all information.
Thank you, for watching and commenting the appreciation. That gives me reason to continue uploading videos 😊 i’m glad i could help.
Life saver, the ikea manual was too confusing this helped a lot
Thank you!
Sooo helpful when it came to adding top/bottom doors! Thank you so much!! :) saved the day ❤️
Glad it helped!
Thank you Alexandre ❤ Your movie was very helpful for me. Much more than IKEA's paper manual. 👍🌷🌻Alexandra.
Glad it was helpful!
Thank you very much,
We didn’t know how to do it but you showed us exactly how it works.
Again thank you
Hello, very helpful video, in my package I have 2 rubber strips but one metal piece and 2 side metal pieces, can you please suggest what’s the second rubber is for?
The strips are for the doors. One in inner door at the end and another in the middle in the outer door
Thanks! But there’s only one metal bar, if there are two rubbers, there should be 2 bars also? And one dust strip which I don’t know on which door it should be placed,
Is it alright to add them after installing the doors?
@@artsypixels9482 I have the same pieces! Have you managed to fit them? Does the 2 rubber strips goes with the metal on the doors?
Hello! I have mounted this same slide doors. I finished but the doors vibrate when I close them, especially the outer door, what could be the issue? Thanks a lot
hey man! i am struggling with the steps you took from 6:30 till 7:00 in this video. can you please share the exact steps you took to secure this rubber strip and metal panel to the door? will it always be the outside door?
Hello Omar! thanks for reaching out. Watch the replies to the other comments. In one of them i explain how ;)
@@AlexandreMMadeira hey man! which comment would that be?
Thank you for taking the time to make this video, it was helpful.
hey man on my doors on the place where it clips into the hole it moves a lot like if it was lose or something. Any idea?
Great video. Hi ow much depth do the doors add to the main carcass?
Thank you very much! It is very helpful! ☺️🐶
I'm so glad!
Thanks, this video helped me a lot :)
Glad it helped!
Mine came with two pieces to put the rubber band in… do I have the wrong pieces ?
I believe one to each door 😃
Thanks for your video. This is very clear, but unfortunately it did not work out well for me. My problem is that after hanging I have an opening at both top corners. Can you help me please🙏
Same problem here..... top inner door leftcorner a huge gap can you help ?
Did you fix it ? Same problem here .. @@tomwesterhof1068
There’s an accessory in the box to close the gap
Just one of the doors should have a gap and that gap is filed with a piece of plastic that comes in the box
I removed the back wall, then positioned the cabinet completely perpendicular and reinstalled the back wall. Problem solved!
Thank you
Brilliant job. The wardrobe looks amazing. Did you push it to the side wall after installing? And was it still intact without affecting the sliding doors?
No. I left it in there. Works perfectly
Hello can you put the names of all parts of this assembly thank you
If i put my inserts in and attach sliding doors at a later date, would it be difficult to attach them?
what inserts are you referring to?
@@AlexandreMMadeira like the shelves and drawers x
@@kayblossom8505 Yes! totaly. You can use the wardrobe without doors. The pax wardrobe is used in open closets as well that don't use doors. Then, if you decide to put them, you can.
The part3 of the series shows you how to assemble the drawers ;)
@@AlexandreMMadeira aw thank you 😊
I can’t understand how to get the second door on.. can’t get them side by side and when I put outer one on top of inner one ,I can’t get them to completely close due to the top hardware running into each other, how can the doors go in that same track . I have tried everything for hours so discouraged
You saved us! Thank you!
Thank you for commenting 😉
I bought a similar wardrobe but i am still not getting how to place the metal with that glued rubber thingy on the outer door. There is no point given. Do we have to screw it ourselves?
Have you found out how to do it?
@@AlexandreMMadeira not yet. That thing is still kept aside
@@snehasamanta7428i made a video for you. I hope it helps 😉
@@snehasamanta7428 hey. did you manage to place this metal and rubber thing? i am struggling with that part too.
@omarshaikh1 Ok I think I found a way to fix it. I hadn't attached the aluminum bar in the right direction. The right way is similar to this video : ua-cam.com/video/MWh20ET7gg0/v-deo.htmlfeature=shared&t=337 . For me it works :)
Great help!! Thank you!!
Glad it helped!
Perfect installation and explanation, thank you
🌷👍🙏
You're very Welcome. Thanks for watching and commenting. It really means a lot
Hey Alexandre, is that a finnish lapphund you got there? Cute dog 🐶
No :) My best friend is a German Spitz . Thank you!
Menuda ostia te has dado colega. Muchas gracias por compartir el vídeo. Muy útil.
De nada 😉
Hey, what is your ceiling height? Our room is about 240/241 and I wonder if this wordrobe will fit. Thanks:)
Is 250. 240 is just enough but you will have some difficulties building it laying down. Best option for you is to build the wardrobe already in place
That "lock the doors in place" is for adjustment.
You totally right! I realised that afterwards
How to un-click the door from bottom system?
No idea. Never had to take them out
Wow you did a great job thank you :)
Thank you very much!
Hi! Does IKEA sells the male to female screws?
They come with the wardrobe ;)
Thank youu!!!! you saved my life
You’re welcome! Glad I could help 😉
Video was helpful. How high is the ceiling of the room?
250mm
Attempting to install this but the bottom of the sliding door does not click on, there is a significant gap. Has anyone faced this problem? Or have any idea on how I can solve this, it’s extremely frustrating 😰😰
Probably the hardware of the doors are shifted. The outside door as to be on top of the inner door. In the next month i am going to upload the assembly of the new pax wardrobe 😉
nice tutorial. what are the dimensions of the wardrobe?
Thank you very much! Mine has 150 cm wide and 56 dip
Tou com problema com a porta , não ficam direitas
Ana, verifique se as rodas estão as duas na mesma calha.
As rodas no suporte pequeno são da porta interior (em baixo) e as rodas do suporte maior são da porta exterior (em cima).
Se bao conseguir amanha mostro como estao as minhas num short 😊
Thank you❤
No problem
Ikea manual what ? thanks from france
Merci beaucoup ☺️
Merci
The riam! Merci pour votre message 😊
Thank you so much 🙏🙏🙏
You’re very welcome ☺️
Thankyou. Great help
Glad it helped
Super😊
Perfecto, gracias!!
😁
it helped a lot
Boa! Obrigado pelo teu comentário 😉
Thanks!
WARNING! It is NOT recommended to use a drill. Use a screwdriver, the density of the material is is like cardboard. My second recommendation is do NOT step in the box unit, it’s easy to break! Hammer ALL the nails all around the back, otherwise the back panel will be wavy.
You can always turn the torque down on the drill!
🤮🤮🤮🤮
?