Degreeing a Camshaft - Step By Step with Crower
Вставка
- Опубліковано 19 сер 2024
- Shane Pulido of Crower walks us through not only the "how" of properly degreeing a camshaft, but the "why" as well. The more effort you put in, the more precise your results, and Crower shows us how to be spot on, every time.
View more at: www.
SUBSCRIBE to the Power Automedia UA-cam Channel -- www.youtube.com...
*****
Visit Power Automedia's online network! Power Automedia is the #1 Automotive Performance Digital Publisher!
Head-to-Head Automotive Show - www.horsepowerw...
Drag Racing Live Streams - www.speedvideo....
Pushrod and Modular Ford & Mustang - www.fordmuscle.com
Next-Gen Ford Performance - www.fordnxt.com
LSX / GM - www.lsxmag.com
Hot Rods & Muscle Cars - www.streetmuscl...
Drag Racing - www.dragzine.com
Street Rods! - www.rodauthorit...
Chevy Muscle Cars - www.chevyhardco...
Engine Performance - www.enginelabs.com
Corvette - www.corvetteonl...
Off Road - www.offroadxtre...
Diesel Trucks - www.dieselarmy.com
Performance Driving - www.turnology.com
Dirt Track Racing - www.onedirt.com
Late Model Performance - www.powerperfor...
For me youre kind of just throwing out numbers and not elaborating what exactly you're doing for people.
I understood him ?...?
3:37 Ok guys, so what they are NOT telling you is that after you get back to MAX cam lift watch the dial indicator and it will go backwards {lifter is on the down fall....Intake valve is closing} When you get to 0.50" on the dial indicator read that number on the degree wheel and add it to your first number then divide by 2 to get your intake center line. So basically your reading 50 thou before max lift and 50 thou after max lift.
This
you just described exactly what they show. what they failed to explain is how to correct a cam that is out.
@@daos3300 he did... he talks about degree buttons.
@@TheRoadhammer379 mentioning in passing something you can do if you have other stuff.. is not the same as explaining how it needs to be done or showing the process.
Great video! Just bought an 0902 for my Jeep swap yesterday so glad to hear you refer to “stack up tolerance “ a term I deal with everyday and so many don’t understand
I use a piston stop to find t.d.c., between bearing clearance and crank dwell there's too much slop to be 100 percent accurate using a dial indicator. Bump it forward then back and split the difference will give you absolute t.d.c.
Really? Didn't get that at all. Please elaborate further
6:58 seconds and I am actually more confused than when I started.
Me too....
ua-cam.com/video/7NO97NNPtuQ/v-deo.html this guy explains it way better you are welcome!!
The damn annoying and distracting background music. What's the point of adding music to a video that's supposed to be informative? Is it really necessary to have that stupid music in the background?
you would think they would make a video explaining in depth how to actually degree a cam, no one understands something that was already done, the dots were already spot on, explaining the process in depth is what everybody came here for, so having a cam that's completely out of time and explaining the process step by every single step is what they want to see for example setting timing, where and how to adjust your piston stop, where is a ideal place to mount your pointer for the degree wheel, how to go about setting up your dial indicator etc, then explaining what the numbers mean and how to apply said numbers to the procedure etc, all this video showed was that the cam was already set and its ready to go
Yea. Most cam degree videos show engines that are ok. This Didnt show anything about how to fix it if its off. Lolol.
Click bait
I've seen a lot of bread twist ties instead of coat hanger. Did he use the calculator to divide 210 in half?
i know right!..
LOL😂😂
You need to show how you set up the wheel etc. Explain what the coat hanger does and go from there.
Was it a 3/4 race or a full race cam? And was it a full moon
This guy knows his stuff very well. The video is not step by step as the title says
Thanks some say it's not enough and not good info .
I'm learning about timing so Thanks .
Dave Moore a
Crower FTW! 🇺🇸🏁🔥🦅
So you told how to check it, but not how to change it....How do you advance the cam?
When degreeing a roller cam, should you use a roller lifter
Thank you for the lesson. I must say though the background music was way too distracting and it would have been better without it.
Okay, how did they get all the milled mating surfaces black -- including the cylinder bores? You aint gonna paint them. Is it anodized or something?
Hi just watched your video my question is if you're cam is a 110 center line is that dot to dot on timing set
Found my cam, gears or keyway was 8* retarded on mine, glad i decided to check even though all parts were major top brands.
sir do you have full video how to get the center line
Another "how to degree your cam"... Where the timing dots were right on AGAIN.
🤣🤣
Lmao 😂
Every time I do dot to dot then go back to check TDC the dots are at 12 o'clock!
My stepfather would call the coat hanger pointer" the fudge factor pointer"! He built bridges for a living! Great man! just sayin
I GOT A 1990 K5 BLAZER 5.7 WITH ECU GOT ENGINE REBUILD GOT THE BLOCK BORED 30 OVER AND DID A FEW UP GRADES IM USING EX262H CAM IN IT WHAT WOULD BE A GOOD COVERTER TO USE I TOOK THE STOCK ONE OUT..AND GOT 2000 TO 2400 STALL .. IS THAT GOOD WITH THAT CAM
Good video, I enjoy the background music. Keeps me focused.
Cool ! I still dont get it!
Harbor freight sells a deck bridge?
course they do. they are chinas 3rd biggest outlet after walmart and home depot.
How far away from Kampala r u Shane? I need to perfect my skill by taking a few polish ups from an expert.
Measuring the amount of degree the piston is at dwell/ sitting still and decide it in half you get TDC it don’t gotta be all that complicated.
Demo was good.
Music was kinda from guys who like pickles.
The background music is mentally draining. Why not have someone in the background repeat "Why" every second.
Is this background music absolutely necessary!! 😕
Worst video on cam degreeing I ever watched. Bout as informative as Crower’s cam cards.
I didn't see this comment coming but that why I read them for the debate.
Thanks
Because it was a daunting task
Nice video but bad music
you should have shown them how you got your wheel on 0 tdc to start with. that will confuse newbies. you should have just let the wheel land on what ever random number, did your 50/50 math and showed you putting the wheel at zero
Yeah, don't you have to find your piston dwell and then zero out the wheel before you find the cam lobe dwell?
Wouldn’t it make sense to how to set everything up? And literally show step by step... just spinning the motor around shouting out numbers , 50 .. 100... before after ... 🤦♂️. Really wish There was a Video showing ACTUAL step by step
????????????
Hi,
I'm afraid you do not explain how to find the TDC... you just show the result. I stopped to watch at 2:35. this is useless !
i think they forgot to zero out the degree wheel
although i learned a couple things i find that this video will not help me degree my cam. Too much detail without explanation.
Lol, it's really easy by harbor freight tools... Add some numbers then divide them then voila. Your cam is perfect and you didn't even have to put it in there....... HA
You’re going too fast and the horrible music makes it more irritating to watch.
Why the stupid music!
SO many things WRONG with this video!!!! Read more of the comments below - I'm with most of them!
This by any means is "step by step" nor user friendly
This doesn't actually show anything useful. Good job.
Everything from Harbor freight? LOL that’s why I don’t buy stuff from Crower