THIS TOOL IS A GAME CHANGER!
Вставка
- Опубліковано 9 лип 2024
- #snapon #newtools #tools
5 inch Two in One Combination Electrical Wire Stripper and Cutter, 26-14 AWG
amzn.to/3XS3clY
VSM Abrasives Non-Woven Hand Pad, 6"x9", Fine Grade, Maroon Color, Aluminum Oxide Grains, Rust and Oxidation Resistant, Multipurpose Abrasive for Finishing and Cleaning, Pack of 10 Hand Pads
amzn.to/4cYl9mX
POWERTEC 4RA2100 Boxed Abrasive Sanding Rolls for Automotive/Woodworking | Sandpaper Dispenser Box with 5 Rolls for Sanding - Includes Assorted Grits 150/240/ 320/400/ 600
amzn.to/4cSiv2c
IRWIN VISE-GRIP Locking Pliers, Fast Release, Long Nose with Wire Cutter, 9-Inch (IRHT82582
amzn.to/4cTo9kL
NEIKO 10054A XZN Triple Square Spline Bit Socket Set | Extra Long 4” | 4mm to 18mm | 10-Piece Set | S2 and Cr-V Steel
amzn.to/4cWx05e
Terminal Removal Tool Kit, 26 Pcs Vehicle Wire Harness Pin Connector Release Tool Set
amzn.to/4cWeR7v
DEPSTECH 12V Cordless Rotary Tool with Display Screen, 5000-35000RPM, 2.5Ah Battery 18W Fast Charging, Power Multi Tool Kit with Featured 48Pcs Accessories, EVA Bag, for DIY Projects/Home Repair/Craft
amzn.to/4cWx30U
Two-Way Articulating Borescope, DXZtoz Wireless Endoscope Camera with 6.5mm Tiny Articulation Snake Camera, 1080P Video Inspection Camera with Light for iPhone, Android
amzn.to/4cCDhDa - Авто та транспорт
My mom amd my wife both do a lot of quilting. Got them both snap on seem rippers for christmas amd they love em
That's awesome
Hello CP AND SUNNY: CHAD thank you for this tool video update. Just like you said you can't beat Snap On. Yes they are expensive but they don't break in your hand. SUNNY is looking terrific & thank you for showing her in this video. God Bless you and my best to SUNNY. TMP from N.J.
Our pleasure!
Sunny is an incredible looking pup. Awesome video. Thanks for sharing. Keep the content coming. Hope you have an incredible night. Much love and RESPECT
Thank you! You too!
I don’t know that I need the whole kit, mostly deal with Weatherpack and Deutsch connectors, but that seam ripper looks useful. I’d like to have something like that for separating the harness cover.
He’s Chad, now with new kung fu grip!
I have the same Snap On set. Got them with the instinct red soft grips. Love the set.
Good choice!
Found the steelman terminal set to be more complete than the snap on when it comes to European (what I work on primarily). Bought a $10 seam ripper set on Amazon to go with it and ever since I've been golden! Great video CP
I can see that the steelman is rebranded in many different companies. Another reason I do not work on European stuff is because I hate having more specific tools, lol
I have that Snap-on kit. I’ve never regretted buying it
CP and Sunny show ! Watching now just finished changing wife’s alternator had a weird noise when I started back up then I finally found my new matco rachet handle getting sharpened by fans 😡
Thanks for the video I've never seen the snapon set and I will be getting one them you cut through that tape like it was a hot knife on butter.. NICE we all know what a pain in the arse that is
Hello again, CP and Sunny
Thank you for another Great Video 👍 I am looking forward to seeing more about the scope 😀 That looks like it could be very useful. Enjoy the weekend 👍
Thanks 👍
Including my face 😂😂😂
SnapOn is cool but I would never buy that seam ripper. It is a constant headache with warranty when they break. My coworker doesn’t even use it anymore for that reason. Instead, I got a bunch of small ones online for cheap. They’re less likely to break since the handle is so small and they easily fit into tight spots. For cutting open a lot of harness tape or battery cables I have the Knipex 98 55 dismantling knife. Works good.
Irwin used to be the best in a lot of their tools. I just got a unibit and it's made in tawnezze and kliens are made in China. I noticed all milwaukee unibits are made in USA.. anyway back on track yes snapon needs to come out with a 9 inch needle nose. But you are right CP they will be 100 bucks and if you only use them a couple times a year the Irwin are fine
Thank you cp
My pleasure
Nice tool Haul..keep them coming CP 🪛🔧🪒
More to come!
Morning Mr CP I'm back with another story for you. I do more stories than comments and or questions. First off I love those Snap-on pin tools. They definitely break easily especially when you try to bend from side to side. I can't believe that I had no clue what that tool was for. The seam cutter. Perfect example of learning something new everyday. Next I was thinking about you yesterday. I was doing an air compressor discharge hose and they are a pain in the bag but what saved me was an old 1" crow's foot I had buried in my junk drawer. Ya it was one of those made in Taiwan tools 😂😂. Anyway see you in the next one 👍 🇨🇦 🔧
Had to de-pin a main harness connector for a bcm on a new f750. Sucked, broke 2 of my snapon ones and had to wait months to get warranty. Idk maybe i was pushing to hard on them but doing 20-30 pin connectors suck
Great review, nice to see Ms. Sunny doing well. I agree on DTM, DT and DTP you need a great set of release, crimp and multi pin sets, as well gold and silver pins. I'm sure that others have done work and the resistance thru connections and pins can cause failure. Be sure that the connectors your using meet the OEM specs.
Yes they do
Hi CP, i have an older made in usa kd tools brake drum gauge that went down to just 8 inch. I needed a smaller version.Apparently apex bought them out and now it is sold under the gearwrench brand that covers 6 1/2 to 14 inch size drums for setting parking brake shoes with drum in rotor hat on gm small suv's.
These mite be what you want then
Lisle - 83400 Combination Brake a.co/d/edCUBxt
I have those Neiko long XZNs and a set of short XZNs - bought them about 13 or 14 years ago and use them every day!
Some of their stuff is like the wish version of Walmart. But then again, some of their stuff is just like this really good!
Will check out those abrasive packs for sure
Hey CP, got a pair of those Irwin needle nose fast release this year, decent quality and don't punish your finger for releasing them 👆
I actually have the Mac disconnect set, 12 piece in the hard pouch. It’s held up much better than the ring set you get at the auto parts store
Dang CP, Harbor Freight just released a big scan tool $849.00. I should have waited buying the Launch x431 pro.
The harbor freight scan tool is terrible
@@CPthetooladdict I was just trying to get you fired up.
Sorry CP , I nearly forgot to hit the like button , but I did leave a comment . 😁
Dang it!! I was almost famous, and now I will forever just be a blue collar guy!! Lol
Great video🎉
Thank you 😁
Try turning the red ball into the harness when using the snap on harness splitter. It’s easier the way you demonstrated but that needle sharp tip can pierce wires.
I've used it both ways and never pierced a wire in 40yrs
Great video! Idk why but i wanna see you fet your hands on some more MAC tools
Hey there cp and ms. Sunny.. hope all is good..
Good video
What up CP! Lets goooo!
On another note, how do you like the spring loaded aspect of those disconnections? I’ve seen em but never used em. They look useful but do they actually work?
Eh kinda not as I hope though
Cp good video just wondering how long the cable is on that bore scope is annd when do you think you'll be doing the video on it
It's only like 36 inches
If that’s the same maroon pads I use at work then they work really good. pretty well all I use on aluminum unless it’s real bad
What you think of WSC200B pliers? Also, who makes the pliers? China🇨🇳?
I'm not a fan. I love my tool aid strippers the most amzn.to/4691yOS
Another great video!!!
Glad you enjoyed it!
Thats a nice scope
Glad see you got another dog cp
👍
Waddup cp👊💯🇺🇸🇺🇸🇺🇸🧰🔩🔧🪛
Good job cp and Sunny
lol got your hand full she is so Adorable .. and full of piss and vinegar lol ..Great haul
Maybe it's best you change your channel name. "CP" might lead to feds coming to check your hard drive.
Just kidding. Keep videos coming, your doggie looks so happy