Great vid mate. Regarding the flushing job, you've done what you can, you've advised them as well as Vaillant, if they don't want to go ahead I'd do the same as you, leave it up to them. That soakaway though 🤣🤣🤣
Just a tip with the bearing plate/membrane... The red part comes off with a twist clockwise (opposite to the norm) and you don't need to take the screws off the fan unit usually.. just press the little red tab that sticks out to unlock..although maybe you did have to on this occasion to take out the broken piece ... another great upload as usual mate..
As the saying goes Dan.. beauuutiful… top job Dan as always. It will pick up buddy . There is only so much one can do. If the customer don’t want to spend the money then that’s their problem. ❤❤❤
Was quieter than usual a few weeks ago but now I’m flat out with work luckily. Booked up until end of August at the moment. I do a fair bit for a builder though that keeps me busy
Ive noticed that column/designer rads tend to give off a lot of rust. I usually double up with 2 litres of inhibitor to be sure. I drained a boiler the other day and the water was ginger😵🤣🙈
You’re an excellent heating engineer / plumber Dan - I hope the work situation picks up up for you quickly. Another UA-cam plumber was saying his work had recently just dropped off.
Thank you Trevor. I think it’s just the time of year, it seems a lot are in the same situation. I can look back next year on this videos if I’m quiet and hopefully realise it’s just the time of year 😂😂😂
I'm not getting many jobbing jobs tbh, I'm getting a lot of bathroom and tiling enquiries but that's it To note, I'm not gas safe, just wet plumbing and tiling
@@Heatking thanks Dan. I have water hammer on my pipes, the guy who just serviced my boiler coming back to fit something on the pipes to stop it, it’s annoying to hear it, 😂. Enjoy your day, and keep up with the videos buddy. 😃 🥰.
I think the big problem at the moment Dan is everythink is so expensive people just haven't got any money it will pick up again but it's going to take a while so when you do go to jobs you need to be looking to make your own work
Good vid, im sure the best location for that system filter is after the underfloor and ch returns, but before the boiler? as it looks like the UFH by-passes it. keep up the good work tho :)
@@dazl7954 Daz, you’re right the filter was after the tease to the underfloor heating so only doing half a job ha ha. Well known big blue company installed the boiler.
That Thermostat is a Salus it500. They are sh*t. It can be used as a dual programmer or just a thermostat. There’s a few common wires linking over. Should be easy enough to swap it for an Esi thermostat obviously two lol. Aux is normally dedicated to hot water. Keep up the great work 👍
Thank you for watching and tuning in. I love reading your comments so drop them down below ❤
Great vid mate. Regarding the flushing job, you've done what you can, you've advised them as well as Vaillant, if they don't want to go ahead I'd do the same as you, leave it up to them. That soakaway though 🤣🤣🤣
Haha cheers mate, glad to know you’d have done the same! ♥️
Just a tip with the bearing plate/membrane... The red part comes off with a twist clockwise (opposite to the norm) and you don't need to take the screws off the fan unit usually.. just press the little red tab that sticks out to unlock..although maybe you did have to on this occasion to take out the broken piece ...
another great upload as usual mate..
Yeh on this one I needed to get inside the fan so thought it best to remove the screws mate. But thanks for the tip! ♥️
As the saying goes Dan.. beauuutiful… top job Dan as always. It will pick up buddy . There is only so much one can do. If the customer don’t want to spend the money then that’s their problem. ❤❤❤
@@user-li8gr8ur8l thanks for the kind words mate. And that’s true I suppose, can’t force them to spend it 😂😂
Flippy flaps 🎉 vaillant love a water quality check 😂
😂😂 and yes they do!! 🤦🏽♂️
Know what you're doing I'll give you that...thankyou for the lessons and keep going.
@@steviegvxr I pretend too anyway Stevie 😂 cheers mate. Hope you’re well.
This time of year not much happening all round,
You need to go on a holiday mate 😂😂
👍😎🤜
Haha cheers Tony, holiday in 3 weeks ♥️♥️
Was quieter than usual a few weeks ago but now I’m flat out with work luckily. Booked up until end of August at the moment. I do a fair bit for a builder though that keeps me busy
Is it the builder what’s made you get booked up then mate?
@@Heatking around 3 weeks is booked up with the builder then 3 weeks of jobbing and boiler installs
Another good un Dan, plenty of finger action 😮😂
Haha cheers Matt!
Ive noticed that column/designer rads tend to give off a lot of rust. I usually double up with 2 litres of inhibitor to be sure. I drained a boiler the other day and the water was ginger😵🤣🙈
@@russellbaldry5095 funny you should say that. Because I’ve noticed the same thing with them mate!!
You’re an excellent heating engineer / plumber Dan - I hope the work situation picks up up for you quickly. Another UA-cam plumber was saying his work had recently just dropped off.
Thank you Trevor. I think it’s just the time of year, it seems a lot are in the same situation. I can look back next year on this videos if I’m quiet and hopefully realise it’s just the time of year 😂😂😂
I'm not getting many jobbing jobs tbh, I'm getting a lot of bathroom and tiling enquiries but that's it
To note, I'm not gas safe, just wet plumbing and tiling
At least you have some form of work coming in matey. Unless you don’t want that time of work haha
Condensate looks well installed with the soak away 😂
😂😂😂😂
Great video Dan, hope you enjoyed those flaps, 😂😂😂, you know me , sewer mind, 😂😂. Need a video on how to solve water bang/hammer on pipes.
Cheers Paul, I’ll get a water hammer one hopefully uploaded before the years out haha!
@@Heatking thanks Dan. I have water hammer on my pipes, the guy who just serviced my boiler coming back to fit something on the pipes to stop it, it’s annoying to hear it, 😂. Enjoy your day, and keep up with the videos buddy. 😃 🥰.
My works dropped off too mate. It’ll pick back up
It will mate! Bring on winter!! Haha
Very quiet, Unsual. July last year for me was in my top 4 of the year
I’m glad we are all seem to be in the same boat. ♥️
Thank you for another video buddy. Now I gotta feed the new born talk to ya soon
Thanks for watching buddy! Good luck with the little one!
Diversify into air conditioning, very easy to fit and great margins.
Might have to at this rate 😂 cheers mate
The quietest June that I can remember
Glad it’s not just me mate! Seems a few in this similar situation
I think the big problem at the moment Dan is everythink is so expensive people just haven't got any money it will pick up again but it's going to take a while so when you do go to jobs you need to be looking to make your own work
Yeh that’s great advice is that mate. And you’re right in what you’re saying with everything being expensive too!!
Good vid, im sure the best location for that system filter is after the underfloor and ch returns, but before the boiler? as it looks like the UFH by-passes it. keep up the good work tho :)
@@dazl7954 Daz, you’re right the filter was after the tease to the underfloor heating so only doing half a job ha ha. Well known big blue company installed the boiler.
Been a while since we had any innuendos 8:25 😂
Haha ohhhh yes 😂😂😂
Another quality video buddy. Works definitely slower all of a sudden gorn from 7-8 jobbing jobs a day to 2-3 a day now
Cheers mark! I appreciate that! And yeh it’s the jobbing jobs I love best! Haha. Hopefully they’ll come back soon!
@@Heatking hope so I find them more interesting than installing boilers rads ect I get bored with installing love jobbing about
@@marksavill367 yeh me too mate, just hate the invoicing afterwards haha
@@Heatking ha true I ended up getting a card machine so it makes me invoice there and then and get paid that way it's done
Another typical great video mate, look after yourself!
Thanks you buddy, and you!
@@Heatking sent you a pic on messenger, make sure you’re not eating 😜
@@Bigdaftboy haha ok mate! Will check it out 💪🏼💪🏼
@@Heatkingdid you get it, I couldn’t see my end?
@@Bigdaftboy no mate. I did look but nothing there
Sites are very slow so there may be a lot of guys struggling
That Thermostat is a Salus it500. They are sh*t. It can be used as a dual programmer or just a thermostat. There’s a few common wires linking over. Should be easy enough to swap it for an Esi thermostat obviously two lol. Aux is normally dedicated to hot water. Keep up the great work 👍
Thanks for the knowledge mate! I didn’t know that, ♥️
Did u try opening the air vent on that magna clean🤔 I’ve had a few stuck ones over the years and that has worked quite a few times👍
Yeh mate tried that too :( just couldn’t get it to budge!
@@Heatkingthat’s about the time I start debating whether to get Thors hammer out the van and get medieval on it👌😂😂
@@dombarnes7092 😂😂 I contemplated it, but thought… best not 😂😂😂
You saying 5 min drive 3 miles that would take me about 30/40 mins lol
😂😂 that’s cause you’re down south aren’t you?
@@Heatking yea mate traffic is terrible lol
its weird mate....can be quiet for a day or two then its mad again
You’re right mate, there’s no steady ground
DTG Plumbing? Is that Mr Heatking's alter ego?
That’s my official business name, the central heatking is my online name, didn’t want to use my business name incase trolls get hold of it haha
@@Heatking Hope I haven't blown your cover...
@@TheTimBullimore I’ve blown it myself by the looks 😂😂😂
whats that wee bottle affair you use to dose systems via rads?
It’s an spi product mate. Google search and it’ll come up :)
@@Heatking thanks mate
People start getting worried to spend money near elections. Its always happened no idea why but that's how things go
That’s a good probable cause actually!
🤘😎🤘🫖☕️🍪🎥👍👍
Good evening Lord Wayne
@@Heatking🤣🤣🤣🤣🤣🤣🤣