Це відео не доступне.
Перепрошуємо.
SLAMMING THE CIVIC!!!
Вставка
- Опубліковано 8 тра 2017
- If you were to compare this to my Del Sol its NOT slammed by any means, but to some people this is slammed. Hope you enjoyed this video! Ran into some bumps along the way but thats how it goes with car stuff. Be sure to like/comment and subscribe for more if you enjoyed and i'll see you all in the next video!
COILS: www.ebay.com/it...
WANNA BUY A STICKER?!? www.diiviinemedia.com
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
![How To Flip Cars | FULL PROCESS [7]](/img/n.gif)
*"That aint a bad way to spend 297 dollars"*
Just a heads up for future reference you can take those bushings out all three can be replaced auto zone sells moog bushings made for them and they are around 10 bucks,also you can remove the shock and control arm as an assy leaving the trailing arm attached.then cut the seized bolt and replace bushing.also with an impact and wd40 go forward reverse a bunch of times before attempting to loosen those bolts.and finally use copper antiseize on all suspension bolts to prevent future seized bolts.hondas are notorious for this problem!!
Why do most car UA-camrs have the same kind of music in their videos? I find hard to believe that all these guys listen to the same music.
Professa_252 copyright my dude
because of copyright, trust me no on listens to these songs lol
I play all my own shit on the guitar for my vids. It's not really great but it's mine. lol
cause there's only like 15 songs that aren't copyrighted.. lol
Pretty sure the songs are like provided by youtube or sumthing
All you did was break stuff and dance around.showed no part of the install.WTF!!!!
Them ccw's really set that Camaro off
Why wouldn't you just cut the fender liners off mid way and leave the back halves in. No liners are cringy. So much shit gets thrown up in the front door jamb without them.
not gonna lie I took mine out but then spray some expanding foam into the cracks then use spray on bed liner to seal it. So far, so good.
Its SO hard to save up for BC's when I get on eBay and see full body coils for less than $300...
got'em in my 90 Camry. lol
Slammin over those potholes and speed humps. Slammin when your car jumps, lands and falls to pieces!!!🤣
the ride height is perfect don't go lower it more functional,great job and your buddies are funny.
That ghost ride, man that's all it takes to make a clean civic cleaner
Looks awesome! the song at 18:33 was much better than the song at the beginning. awesome looking car tho!
Nice work man ... Love that Del sol !
are they bouncy? thinking about buying a set?
to me I don't care about the music just like you I just wanna see the results,the engine bay looks clean and like your lowering setup and it looks functional.
All that work for the bolt? Buy a set of easy out bits i have the ryobi ones from Home Depot , drill a hole in the broken bolt. Set the drill to reverse and as the easy out screws into the hole in the bolt and bites, it starts unscrewing the bolt.
This happened when I lowered my civic as well. The bolt gets galled up to the metal ring inside the bushing and becomes one piece so an easy out wouldn't work in this case. So you either try and cut the bolt off from the other side of the head which is damn near impossible due to clearance or you cut the control arm and save lots of time.
If i get coils on my civic will it go up from thr gtound because where i live st to get a sticker they're amal about a dropped civic ! Should i just get air ride ?
Hey, what type of paint did you use for the center "H" cap??? Awesome work guys and I really enjoy the channel. Thanks... :)
I would add ASR suframe to it also for better handling in the rear.
Slam all the things. Looks so much better. Dope vid
Best vlog yet for sure
video starts @6:00
Mike, do you still have the civic rims? If so would you be willing to sell them?
trying to do the same with my 1997 honda civic ek sedan how much did everything cost all together
found you through haggard garage and I love your vids
What size are hx center caps been having a hell of a time finding any info
put the fender liners back in
From where did you lift up the coupe ?
What kind of coils are those website or page
question bro are those 1-4" dropped coilovers
what song was playing in the car at 8:50, almost sounds like hot boyz
How do they ride? Kinda mad now that I spent 500 on function forms an they don't have dampening adjustment
joshdsm1 they ride like poop haha wicked bouncy
I don't know ... could be lower ... how did they hold up ? are they still holding on tight or have you come across any problems with them?
i went threw the same thing with my integra i had to buy new control arms cuz i had to cut mine off too
How much would a shop charge you for that work???
Manny 123 I recently redid pretty much my entire suspension (control arms with bushings already pressed in, tie rod ends, cv axles, strut mounts and coil overs) and it ran me $600 since I provided my own parts. Probably half that if you’re only doing coilovers
What wheels?
4:50 "it's a Camaro, but whatever."
i hear that asking alexandria!
Infinite Motor Films I fucks wit you AA is the only way also korn fuck Dennis shaforostov
Anyone notice that his voice got deeper when he change the video to the next day😂
Do you know the name of the wheels? Looks like a rota integra type r but i'm not sure.
Wim Honda hx wheels
What rims are those?
could you please tell me how the coilovers that you bought off of eBay how they worked out for you thank you
Where they you got the coil overs ? I need some cuz the one I have is shit
Richard Martinez on ebay
that control arm didnt need to be cut, you could have used it Gator bit and just bore the bolt.
how much for the shell?
have those same wheels!!! type R ftw
Can you show the black Audi beside the garage ?
2:36
Hey I have a rsx type s would these coilovers fit ?? Any help
2002
Great deal on coils, you’re really gonna be enjoying it after they blow from a month of use
Neobaneo *in spongebob commentary voice* “7 months later”
You gay
DIVINE can I ask what springs you bought? I got the sams car
8:30 volume up
Hey how do they ride on regular driving? Bouncy? Can you go any lower? My car it's slammed
Francisco Colon they aren't very bouncy at all and can still go lower
are those 1-4" dropped coilovers
Low expectations Studios click the link in the description and find out
Why didn't yal lower the rear with the jack first instead of having to use wood under the tire? Lol
Looks pretty good !!
Those are the same coilovers the hoonigans used #maxpeeding
Mike how old were you in this video? 😀
21 :)
@@diiviinemedia this video is so fire
Are you going to rust the Civic too
Dose anyone know were I could find coilovers for my Acura EL 2002 and just wondering if there compatible with the Honda models? Im from Canada
Incredible Tapes em2 ep3
William Smith thank you,
No problem bro
BOOIIIIIIIIIII put them coils in yo description hahaha
done haha
Aaaaaaaaand this is why your sticker is on my dash cuz you're a real G
Nooooooooo, why modify it?
87,000 miles 😳😳😳
Ej1 lovers!!
Keep it up man !!!
this is nice i am working on a Honda Del sol also check out my white del sol it's a 1993 and I plan to make it a beast in a way jjmax2007
Why does he sound like rudnick now lol but great vid
Freddy Nava taking piss out of the accent
nice video man! ftt!
yo that happened to mine too
You coulda got acetone at lowea
Word mass plates im in mass to bro
Great video but chill with the language
sweet
I'm weird, I actually want to raise my ek4 by 1-1.5 inches
Y
Ya Y
I'm doin the opposite
sound like diesel
not slammed
This dude cussed so much. I couldnt enjoy the video. Sorry for not finishing the video lol
Kinda childish you keep saying "fucking" in like every single sentence
first
Tired of these civic ebay build