How To - iDatalink Maestro Rr on Pioneer NEX Receivers 2017
Вставка
- Опубліковано 30 бер 2017
- In this video you'll learn about using the iDatalink Maestro Rr OEM integration unit on your Pioneer NEX Receiver.
AVH-4200NEX , AVH-4201NEX
AVIC-5200NEX, AVIC-5201NEX
AVIC-6200NEX , AVIC-6201NEX
AVIC-7200NEX , AVIC-7201NEX
AVIC-8200NEX , AVIC-8201NEX
For more videos about Pioneer NEX Receivers check out this You Tube Playlist: • AVIC-8200NEX
You can find more information about the Pioneer NEX Receivers here: www.pioneerelectronics.com
Follow Pioneer on facebook / pioneernorthamerica
Join the conversation with Pioneer on Twitter / pioneerusa
Follow Pioneer on Instagram / pioneercaraudio - Авто та транспорт
doing an engine swap into a much older vehicle. What are the required parameters for the obd2 adapter to operate? The donor vehicle was a 2001 vw jetta tdi with can hi and can low.
This may be possible, but I'm not sure this will work with a 2001 VW. I recommend to contact iDatalink for more detailed information. Please note: in order to see the gauges on the in-dash receiver screen and use the OBD II port for this data, you must use the add-on iDatalink Maestro RR. This part is sold separately and adds on to the Pioneer receiver. Additionally, the vehicle must be supported by Maestro RR. Please be certain the 2001 VW is supported. You may need to contact Maestro for additional support. You can start your research and contact the company here: www.idatalinkmaestro.com/en You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Is this the only interface I need for a 06 Cadillac DTS or do I need the PAC interface too?
I recommend to check the Maestro RR website for support for your particular vehicle. You can find it here: maestro.idatalink.com/ This will likely be the only interface you'll need for the in-dash receiver. If you are talking about On Star or an OEM amplifier interface, other products may be required. You can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
I have an AVIC-W8500NEX w/Maestro RR. I did not use the OBDII plug but the gauges still work on my 2019 Toyota Tundra. Is the OBD already hardwired in?
It sounds like you used the TOY-02 T-Harness with Maestro RR. This wire harness will transfer selected data from the vehicle to the Maestro RR interface for display on the Pioneer in-Dash receiver. You can find more videos for in-dash receiver's very similar to Pioneer AVIC-W8500NEX here: ua-cam.com/video/ObpKXwrN8us/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
I wanted to ask the same question about the AVH-2330NEX. So just to confirm, the 2330NEX will show TPMS, Door open, etc (ALL features shown in the video) IF your car is compatible? I know there is a way to check at idatalink, but my harness (for a Subaru) is going to be coming out in about a month, so I can't check it on the compatibility page at idatalink yet.
I want to buy my stereo now (it's on sale) and then wait to do the install until my harness comes out. THANKS!!!!
As you noted above, Maestro RR is very largely about your compatibility with your vehicle. Here is a video of AVH-2330NEX with Maestro RR simulator connected: ua-cam.com/video/GX8bETHjZkg/v-deo.html
Here is a playlist of AVH-2330NEX videos: ua-cam.com/video/uympbLEIOsc/v-deo.html
I'm installing the AVH-4200 NEX in my 2011 f150. I have the idatalink kit but when I turn on the pioneer radio, I don't have any steering wheel controls and my sync isn't working and I can't access any of the car features through the radio. Radio powers up normal and radio works and my phone can connect through Bluetooth. I followed the vague instructions as best as I can. Can you help me figure out what's my error
Contact idatalink for support on the idatalink maestro RR. Is your vehicle supported by maestro RR? When you used your computer to flash the maestro RR did you choose to have the data carried by the 4 pin plug or the steering wheel control plug? Did you choose to retain the car features including Bluetooth? You can find more videos about AVH-4200NEX in this playlist: ua-cam.com/video/vNHEvsZ5JKc/v-deo.html
Ok thank you very much I did contact idatalink this mornig, waiting to hear back. Also my vehicle is supported by maestro RR. I dont remember what I selected when I flashed the module, I dont remember seeing that kind of option. I will look at the link you sent me. Thank you very much for your help.
I just bought the AVH 2440 NEX. Will this RR unit work with it?
The Pioneer AVH-2440NEX has the necessary port on back to use the idatalink Maestro RR. You can see the port in this video: ua-cam.com/video/Yx45-NGqz2o/v-deo.html Will it work is dependent upon your particular vehicle. Check with idatalink to see if your vehicle is supported: maestro.idatalink.com/product/product/product_id/102 You can find more videos about Pioneer AVH-2330NEX here: ua-cam.com/video/kpKYks-17gM/v-deo.html You can find more videos from Pioneer here: ua-cam.com/users/pioneerelectronics
Will idatalink work on the AVH-2330nex??
Yes, it will. And it will look nearly identical to what you see in the video above. Check out this video to see the back of the AVH-2330NEX where idatalink Maestro RR will plug in: ua-cam.com/video/uympbLEIOsc/v-deo.html
Is this device able to reset the car computer and turn off the airbag and tpms light on my dash
For detailed information about your particular vehicle, you should contact iDatalink. You can find more information about AVIC-8200NEX here: ua-cam.com/video/mHpVfoueoEE/v-deo.html
I see that idatalink maestro pairs with a AVH-1700s what about the AVH-X1800s ? I want to integrate my AVH-x1800s with my 2015 Infiniti q40 with idatalink maestro so I won’t lose my climate controls and other important info. Thanks
Maestro RR does not work with AVH-X1800S. There is no port for Maestro RR. You can see the back of AVH-X1800S here: ua-cam.com/video/WzlFrJ9RsJ8/v-deo.html I recommend to check with iDatalink Maestro RR web site to be sure your vehicle is supported. You can find other Pioneer in dash receivers that work with Maestro RR here: ua-cam.com/video/GX8bETHjZkg/v-deo.html
Deckerd Otto what type of port do I need? Thanks, yeah on the idatalink maestro website doesn’t support my year or vehicle but does support the 2013 G37 ... I don’t know what to do.. even if I purchase a compatible HU I guess I’m not guaranteed to have it working since my vehicle year and model is not listed on their site... thanks for your time 🙏💯
Does this potentially eliminate the need to use the included mic? I would love for it to retain the mic that was included in the convenience package.
Potentially yes. It depends upon your particular vehicle. Please check with the idatalink maestro rr website to be sure if your vehicle is supported and can retain the factory microphone. You can find more videos about AVH-4200NEX in this UA-cam playlist: ua-cam.com/video/g5juaKNXr90/v-deo.html
Will this let you use performance pages on a dodge challenger
This depends 100% on the year and sub model of your Dodge Challenger and if it is supported by Maestro RR or Maestro RR2. You can learn more about Maestro support for your particular year of Dodge Challenger here: maestro-fit-guide.idatalink.com/
Be sure to get a Pioneer receiver that works with Maestro RR or RR2. Many are available including DMH-WT8600NEX seen here: ua-cam.com/video/QrvNkGgRo7E/v-deo.html or the Pioneer DMH-W4660NEX seen here: ua-cam.com/video/B2TTfJUD-es/v-deo.html
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Does anyone know if idatalink maestro rr is compatible with kia optimal?
This will depend upon the year of your KIA Optima. You can learn more about idatalink maestro and check compatibility with your particular vehicle here: www.idatalinkmaestro.com/en You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: ua-cam.com/video/ObpKXwrN8us/v-deo.html You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Why is my climate control and parking assist not showing up in my Pioneer DMH-1500NEX for Toyota Corolla 2015?
Did you install the Maestro RR in the vehicle with the receiver? Did you flash the maestro RR with the proper vehicle data before installation?
The Pioneer DMH-1500NEX is capable of showing on-screen climate controls for vehicles that had on-screen climate controls before replacing the receiver. The Maestro RR and Pioneer receiver does not give you on screen climate control if the vehicle has hard button climate controls. If the climate controls on your 2015 Corolla are hard button controls just below the in-dash receiver, they should still be working. The Pioneer DMH-W1500NEX has nothing to do with them. You can switch on Parking assist guidelines in the Pioneer DMH-1500NEX. You can see it here: ua-cam.com/video/WY0GLsC3AxE/v-deo.html You can find more videos about Pioneer NEX in-dash receivers here: ua-cam.com/video/ObpKXwrN8us/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
Deckerd Otto Thank you for the quick reply. I did install it correctly in the Toyota Corolla LE 2015 and flashed the correct firmware to the iData Maestro RR. I got to learn from an online source that climate control integration was with the OEM head unit. I just wanted to get my stereo head unit install completed with my Toyota Corolla LE 2015.
The gauges look like they're very laggy.. Are they?
In this video, you are viewing a simulation of what the product will do, when actually installed in a vehicle. It's not connected to a vehicle for this video. The in-dash receiver displays digital data delivered through the idatalink Maestro RR box being read through the OBD II port from the vehicle. In many cases, the gauges can be customized based upon the data available through the vehicle buss. Each vehicle is different. Not all gauges are available on all vehicles. Minimum and maximum range settings for many gauges are available, again depending upon the individual vehicle. Even though you may be seeing a video representation of a needle pointing to a number on the display screen, this is not an analog display. It's a digital display. Please note: What may appear to you to be lag in the display, may be a digital display updating to it's next displayable increment. On a gauge set up with a with a wide minimum to maximum range, the digital display increments will be large and may make the needle appear to jump from one reading to the next reading. You can find more videos about Pioneer NEX in-dash receivers here: ua-cam.com/video/ObpKXwrN8us/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
Does it work for Pioneer 1500nex ?
The Pioneer DMH-1500NEX supports iDatalink Maestro RR.
The Pioneer AVH-1500NEX also supports iDatalink Maestro RR.
The next question you'll need to answer is, does Maestro RR support your vehicle? You can learn more about vehicle support and using Maestro RR here: maestro-fit-guide.idatalink.com/
You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics
any bmw?
I recommend to check for your make, model and year of vehicle on the iDatalink Maestro website here: maestro.idatalink.com/ You can find more videos about compatible Pioneer in-dash receivers here: ua-cam.com/users/pioneerelectronics
Why doesn't the 8000 or 8200 have this support? Seriously. They aren't that old. Pioneer doesn't like to update or support old units at all.
You are incorrect. The 8200NEX is the radio that's shown in the video above. The Pioneer AVIC-8200NEX is listed in the video above as one of the in-dash receivers supported by Maestro RR. You can see it here: ua-cam.com/video/vzNd_BRzAQc/v-deo.html The Pioneer AVIC-8000NEX also supports Maestro RR. The 8000NEX is not included in the video above because the onscreen operation is slightly different that what is show in the video above. The Pioneer AVIC-8000NEX was introduced in 2014 and is still being updated by Pioneer as of late 2018. Please be sure to update the Pioneer AVIC-8000NEX with the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVIC-8000NEX#downloads Please be sure to update the Pioneer AVIC-8200NEX with the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVIC-8200NEX#downloads You can find more videos about Pioneer AVIC-8200NEX in this Pioneer playlist: ua-cam.com/video/6VY10uChNTI/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics
My 8600nex doesn't show the tire pressure or codes. Something I'm missing ? Using the rr
The Pioneer DMH-WT8600NEX is capable of displaying tire pressure, and open door, battery voltage, in the vehicle information screen displayed when using the Maestro RR or RR2 when it's connected to the OBD-II port on the vehicle. You need to flash the Maestro RR memory with the proper vehicle, and the proper in-dash receiver. Please be sure Maestro supports that information on your particular vehicle. You can find more information about Maestro RR here: maestro.idatalink.com/product/product/product_id/102 You can find more information about DMH-WT8600NEX here: ua-cam.com/video/CUrxfgBy2BM/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics