OPEL CORSA LITE - HOW TO INSTALL CYLINDER HEAD

Поділитися
Вставка
  • Опубліковано 4 жов 2024

КОМЕНТАРІ • 30

  • @lastermann
    @lastermann Рік тому +6

    you forgot to put some slicone on spark plugs

  • @tkaesthetics
    @tkaesthetics Місяць тому

    Hi all, is there a specific way the campshaft should be turned to be lined up before putting it onto the lifters with the whole box ?
    ❤thanks

  • @nkosmia
    @nkosmia 3 роки тому +2

    Buy new headbolts and why are you putting silicone on intake and put a gasket on top?

  • @Jehan_Joseph
    @Jehan_Joseph Рік тому +1

    Did you have to bleed the lifters

  • @nkosmia
    @nkosmia Рік тому +1

    Why are you applying Silicone on intake "ports" there's a gasket for it isn't

  • @nkosmia
    @nkosmia Рік тому

    You Guyz Aiii Aiii ayaya! You applying Silicone on everything thing you put back those things have gaskets

  • @Mylifelovingit
    @Mylifelovingit 3 роки тому

    Brilliant. I learnt a lot here

  • @ndumisodube76
    @ndumisodube76 4 роки тому +2

    Practice cleaning man.and install new head bolts

  • @dinoomalanga1082
    @dinoomalanga1082 Рік тому

    Thanks malume syabonga

  • @randolphpayne8249
    @randolphpayne8249 3 роки тому +2

    real bush mechanic style. head and valves look dirty

  • @nakajohn6371
    @nakajohn6371 3 роки тому

    Can you show how to install throttle body and throttle body connections

  • @LunganiMemo
    @LunganiMemo 4 роки тому

    Hello Bush mechanic, I have a problem with my 2002 opel corsa lite when coming to a stop or shifting down, as soon as I press the clutch the revs drop so low that the engine almost cuts off and sometimes it does cut off. When accelerating the check engine light comes on and goes away in 3-4 seconds or until I release the accelerator. I have installed these new parts in the last 4 months, crankshaft sensor, Idle air valve, petrol pump, and fuel pump relay.. Please assist on what could be the cause of this problem ,

    • @LunganiMemo
      @LunganiMemo 4 роки тому

      It's a 2004 model

    • @simphiwesimba9577
      @simphiwesimba9577 3 роки тому

      Check the idle control valve

    • @sabirmirza7910
      @sabirmirza7910 2 роки тому

      Check your throttle control sensor.

    • @nevilleminus6054
      @nevilleminus6054 2 роки тому

      Mine the same on Corsa 1600i Sport 2001.I change fuel pump,petrol regulator, MAP sensor,clean throttle body,new throttle sensor,new IAC,new head sensor,oil change new oil filter new petrol filter.????.
      Can it be the PCV?? oxygen sensor???.misfire then come wright blue smoke at start up😩

  • @sohailansari6006
    @sohailansari6006 2 роки тому +1

    Gas kid chahiye kaha milega

  • @mlekelelimichael2686
    @mlekelelimichael2686 2 роки тому

    Nice job

  • @felaslocksmithmwale938
    @felaslocksmithmwale938 4 роки тому

    U DE best buddy

  • @SamuelHattingh
    @SamuelHattingh 4 місяці тому

    Timing marks

  • @risenga_junior302
    @risenga_junior302 Рік тому

    Pls share part 2

  • @MyWorld-sy9el
    @MyWorld-sy9el 3 роки тому

    I did this and water is flooding the top

  • @nkosmia
    @nkosmia 3 роки тому

    You never used a torque ranch and set your 90 degrees????

  • @DimpieDeBruyn
    @DimpieDeBruyn 2 роки тому

    *WTF*

  • @mazarkhan4997
    @mazarkhan4997 Рік тому

    Not.fetet

  • @terencekuzgundehaas5025
    @terencekuzgundehaas5025 5 місяців тому

    UNPROFESSIONAL

  • @mazarkhan4997
    @mazarkhan4997 Рік тому

    Very.is.a.terma.saed.wal

  • @Djosh388
    @Djosh388 3 роки тому

    Tittle should be "how easy it is to install an opel corsa cylinder head"