Hi , yes you right . I have a tool to do that , will show it in the next video. Thanks for you comment, anything else you want to see me make a video about?
Then there must be another problem . Difficult to determine as there could be many things wrong from timing , position sensor to even just a loose wire or cracked spark plug. Best to take it to a mechanic
Hi,mine misfires aftrw retiming and the belt got broken while pulling off the traffic ligts.can it be my valves? No smoke,power still good only the misfire
Mr Solve it can you provide me with the torque settings on the camshaft , crankshaft and piston rod bearings settings please I got the head settings in this part please.
Hi . The camshaft sprocket gear 50nm +45deg (3 Stretches max then replace bolt) Crankshaft bolt 150nm (3 Stretches max then change the bolt) Mains and big ends , please check with the engineers on torque settings of the bolts . It's usually a very small amount of torque depends on bolt sizes and work done on the crank
Great can't wait for the next parts helps allot
Awesome content.
thanks for sharing
Thank you for watching
Hi same ting happened to me you can change the lifters and rockers without removing the cam box. Use a extended socket and a 6mm bolt with washers
Hi , yes you right . I have a tool to do that , will show it in the next video.
Thanks for you comment, anything else you want to see me make a video about?
I want to 🔥 learn to fix those 🎉
Can you do a short on the oil pressure sensor/switch please
Hi . Yes sure . Is there something specific you want to know about it
@@solveitautomotive9485 where is it located?
Please also show us the setting up of the timing in a slow manner so that we can see properly.
Will do
@@solveitautomotive9485pls show the setting of timing
Hi. I put everything in the same sequence but its still mixing. The engine starts without hussle but its still mixing while its idling.
Then there must be another problem . Difficult to determine as there could be many things wrong from timing , position sensor to even just a loose wire or cracked spark plug. Best to take it to a mechanic
When are you uploading the next video?
About two weeks time .
How do u go about after fitting the cam box with setting the timing
Hi first install the cam box, cylinder head and then set timing when you put on the timing belt
Hi,mine misfires aftrw retiming and the belt got broken while pulling off the traffic ligts.can it be my valves? No smoke,power still good only the misfire
Hi . It can be a number of issues best to get it to a good mechanic
❤
Opel will turn you into a mechanic. Same with VW.
😅 glad somebody understands
Mr Solve it can you provide me with the torque settings on the camshaft , crankshaft and piston rod bearings settings please I got the head settings in this part please.
Hi . The camshaft sprocket gear 50nm +45deg (3 Stretches max then replace bolt)
Crankshaft bolt 150nm (3 Stretches max then change the bolt)
Mains and big ends , please check with the engineers on torque settings of the bolts . It's usually a very small amount of torque depends on bolt sizes and work done on the crank
Thanks boss for the reply I do appreciate
Hi I want to purchase a corsa bakkie,but is it easy to find parts,preferably a diesel one?
Hi . These bakkies are still very much a part of South Africa. Parts are fully available. Petrol spares are way more available than diesel.
my corsa wont go pass 4000 revs
Can I please have your contact details sir
As I only take on a few vehicles a month , I am contactable in the members section of the channel