No problem my dude. Glad I was able to help with some info. The xrx dpa is a great little chassis and allot of fun. I would start with the steering rack and front hubs for upgrade parts.
Aweosme video I don’t have this chassis but I’m struggling to get the front hubs to clear the lower arm is this just a case of shorting the front arms so the car should sit lower ? Which then should allow hubs to clear arms … sorry I’m fairly new to rc drift
i cant get the front steering linkage right i cant get the threaded piece into the plastic i bolt thing its like the threaded metal thing is to big ? did you have to like hand drill it out or did yours just fit?
Sorry to hear you having some difficulties. You shouldn't have to drill out anything for the steering besides the white servo arm that bolts to the servo. You may need to make those holes slightly larger to accommodate the ball screw. There are different size ball end links for different applications on the model. You may be using the wrong ball end or ball size in that location.
I run a company called bias because they offer 3 power plugs which gives me options to power lights ect. I run a 200-400mah 2s depending on the body that I'm using.
Using a 2s 300mah, I'm getting 30-45mins of nonstop laps. But that will vary depending on the size/amperage of the esc, and the kv of the motor being used. I'm using a 3500kv motor and a low amperage esc. I belive it's around 8-10amp.
Great video, awesome reference for other XRX builds to compare to.
Thanks for watching. Hoping to make it easier for new drivers to get their cars going and have fun.
Intuitive nice work
Thank you!
Thanks for the info definitely helping me out 👌
No problem my dude. Glad I was able to help with some info. The xrx dpa is a great little chassis and allot of fun. I would start with the steering rack and front hubs for upgrade parts.
Thanks for watching 👀
Aweosme video I don’t have this chassis but I’m struggling to get the front hubs to clear the lower arm is this just a case of shorting the front arms so the car should sit lower ? Which then should allow hubs to clear arms … sorry I’m fairly new to rc drift
i cant get the front steering linkage right i cant get the threaded piece into the plastic i bolt thing its like the threaded metal thing is to big ? did you have to like hand drill it out or did yours just fit?
Sorry to hear you having some difficulties. You shouldn't have to drill out anything for the steering besides the white servo arm that bolts to the servo. You may need to make those holes slightly larger to accommodate the ball screw. There are different size ball end links for different applications on the model. You may be using the wrong ball end or ball size in that location.
what battery do you use ?
I run a company called bias because they offer 3 power plugs which gives me options to power lights ect. I run a 200-400mah 2s depending on the body that I'm using.
What of run times do you get from these batteries?
Using a 2s 300mah, I'm getting 30-45mins of nonstop laps. But that will vary depending on the size/amperage of the esc, and the kv of the motor being used. I'm using a 3500kv motor and a low amperage esc. I belive it's around 8-10amp.
Where did you buy the body?
I built it with 2 different model kits and a 3d printed body kit.